The k_mem_block structure has been obsolete for some years with
a few loose ends still remaining. As its usage in the usb_dc_mcux
codebase was confined to needing its "void *" pointer field, it
was simple to enough to hoist that field to remove another loose end.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Removing the legacy field '_rx_data' from the mailbox message
structure 'k_mbox_msg' as the mailbox code that used it was removed
over six years ago.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Very verbose log message without too much context that should be a debug
message rather than a info().
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Platforms that determine their basic timer frequency at runtime instead of
build time cannot compute thread initialization timeouts during
compilation.
Switch back to storing the init_delay value in milliseconds and perform the
conversion to a k_timeout_t at runtime.
Signed-off-by: Keith Packard <keithp@keithp.com>
This reverts commit 341590545a, the issue
has been fixed in e1647e35c0, tested with
west build -t run -p -b qemu_riscv32_xip \
-T tests/kernel/xip/arch.common.xip
west build -t run -p -b qemu_riscv32_xip \
-T tests/kernel/xip/arch.common.xip.minimallibc
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Check whether peer is subscribed for ASE state notification before
calling bt_gatt_notify. This handles an assert thrown when the
notification failed to be sent.
Fixes: #63728
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
An urforseen error was introduce with #62713. When "--device-testing"
or "--filter runnable" is used in CLI, twister will skip tests which
cannot be executed (not just built) on a given platform. If a given
platform is among integration platforms it will cause an error.
However, it shouldn't be the case. Such skip is intentional and
shouldn't be an error. Fixed by assigning an existing Filter.CMD_LINE,
which is exempted from being turned to error.
fixes: #63844
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Zephyr expects __rom_region_size to be aligned to 4, otherwise
assertion will fail.
This commit alignes last_section which results in aligned
__rom_region_size.
Signed-off-by: Franciszek Pindel <fpindel@internships.antmicro.com>
If the PA gets terminated, we clear the pa_sync field of the
corresponding broadcast sink object.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For some reason the state_change variable was static, which
does not make any sense. Changed it to a regular local
bool in bt_bap_scan_delegator_mod_src.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Commit makes workable proxy solicitation functionality
only server part without dependencies on client part.
Only on demand proxy server is required.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
If the channel was used for 16bit in the once, subsequent 32bit sample size
audio will be broken since the SCS bit remains set.
Example sequence with SOF:
normal audio playback with 16bit
ChainDMA audio playback with 16bit
normal audio playback with 16bit
The last playback results garbled audio.
Introduce intel_adsp_hda_set_sample_container_size() helper function
to handle the SCS bit and use it in the driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
The bt_le_per_adv_sync_create documentation did not mention
anything about the (lack of) timeout when using the function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The `upload_status_rsp_with_progress` function uses the currently set
slot pointer to set firmware id field in the message. If another
upload starts but the firmware is already received, the slot API won't
let us to set the fwid and will return an error code. In this case, the
slot pointer stays invalid as fwid wasn't set, and
`upload_status_rsp_with_progress` will not add fwid as the lenght is
zero.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
- if we have input enable use CY_GPIO_DM_xxxx else
CY_GPIO_DM_xxx_IN_OFF;
- added bias_high_impedance option
- Updated HIGHZ drive mode, now it sets if:
--- we have bias_high_impedance
--- or if input_enable and no addition bias mode
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
This driver uses the math library, so it cannot use the minimal C
library. However, it should be fine with any complete C library, not just
newlib.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reset TestInstance status when ProjectBuilder.run() is called
to run the test after its successful build, so the build status
will not propagate as the run status if the run fails.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Fix the Twister Console harness ordered 'multi_line' and 'one_line'
pattern matching to treat the ztest as failed when not all of the
expected patterns were found in the console output, but the ztest
application itself reports 'PROJECT EXECUTION SUCCESSFUL'.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Handles return values from settings handlers which were missing
and would return "Unknown error" to clients instead of the read
error
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Fixes the error code being returned when trying to perform a
hash/checksum on an empty file to show it is because the file is
empty, not because a paramter (which was not provided) was too
large.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Fixes an issue which would cause a fault if someone attempted
to write to the (non-writable) blinfo keys
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The macro K_THREAD_STACK_MEMBER has actually been deprecated
since v2.4.0 in the macro doxygen description, but it was
never marked with __DEPRECATED_MACRO. Since this was being
used in various drivers, make it follow the deprecation
process.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fixes: #63738
Create dedicated entries for ARC MWDT, arm compiler 6, and one Api
toolchains.
This helps contributors to identify whom to contact in case of issues
related to those toolchains.
The Zephyr SDK, cross-compile, and other GCC based compilers are covered
as part of the general cmake/toolchain,compiler,linker,bintools entry in
the MAINTAINERS file.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fix hung Controller when establishing CIS on an encrypted
ACL connection with Controller built with direction finding
support enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add verification of all stream's SDU, RTN and PHY rather than
just the first.
Also add another test case where only a subset of streams are being
reconfigured, but where the above values shall be updated for
all streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When the bt_bap_broadcast_source_reconfig was supplied with a subset
of the streams, it would only update the codec cfg and qos for the
streams provided in the parameters.
This commit changes that, so all streams are properly updated,
as they share some common values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When calling bt_bap_broadcast_sink_delete, the broadcast sink
should not attempt to terminate the PA Sync. The PA sync can live
on without the broadcast sink, just as the broadcast sink can live
on without the PA sync (which is why the PA sync check was completely
removed).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When updating the Scan Delegator receive state, we shall only
set the BIS indexes in bis_sync that we are actually synced to.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Functions `zephyr_linker_dts_memory()` and `zephyr_linker_dts_section()`
are described as defining a memory region or section based on a DT node,
as long as it "exists and has status okay". However, only the existence
of the node is actually checked, using `dt_node_exists()`. To fix that,
employ `dt_node_has_status()` instead, which can check both conditions.
The status check is important, because both functions require the given
DT node to contain a `zephyr,memory-region` property (not to be confused
with the compatible string). This property is required by the associated
binding as well, but required properties can be omitted from nodes which
don't have status "okay". In those cases, edtlib won't raise an error,
and neither should CMake, because those nodes should be ignored.
Speaking of that property, add a missing error check for it as a bonus
(tucked behind the status check, of course).
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Calling this function with an output variable named `var` or `okay`
could produce an incorrect result, due to the variable being mishandled.
Add simple changes to avoid this.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
ZBus had one break change related to the runtime observers'
configuration, and the VDED delivery sequence has changed. This commit
adds entries on the migration guide about the mentioned changes.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Add documentation for the new way to storage observers, the message
subscribers, and the confirmed message sample.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
In commit commit c19c6fb438
("Revert "scripts: west build: default build.pristine to auto""),
we set the default --pristine value back to 'never', but the
documentation never got updated. Fix it.
Signed-off-by: Martí Bolívar <mbolivar@amperecomputing.com>
This commit adjust the chat scripts for the simcom
sim7080 and gsm_ppp compatibles to fix an issue found
when trying to use a sim7080 modem. The CMUX command
includes optional parameters which are not identical
for all modems, so the AT+CMUX command has been adjusted
to only contain the mandatory parameters.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
This commit increases the buffer used for commands
in the control channel within an instance of the
modem_cmux module. The buffer was not large enough to
store an MSC command if the optional break signals
where included. This commit fixes the issue and
updates the test suite to use the max size MSC message.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
Fixes a typo in the release notes where two 'Arm' entries were
present, and the first should have been 'Arc'.
Signed-off-by: Kevin Townsend <kevin.townsend@analog.com>
Use the same pins as when testing with SIUL2 EIRQ interrupt
controller, but instead test routing the external interrupts
to WKPU controller.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
