This commit adds board files for the da14695_dk_usb.
The board features two Mikrobus sockets, these are added to the dts
Signed-off-by: Niek Ilmer <niek.ilmer.aj@renesas.com>
This commits adds the DA14695 variant.
The main difference with the DA14699 is a smaller package with less
GPIO.
Signed-off-by: Niek Ilmer <niek.ilmer.aj@renesas.com>
Add the following XPRO boards to flash driver test:
SAMD20, SAMDE54 and SAMR21
Signed-off-by: Daniel Evans <photonthunder@gmail.com>
Co-authored-by: Gerson Fernando Budke nandojve@gmail.com
Rename the Kconfig option from BT_ISO_ADVANCED to
BT_ISO_TEST_PARAMS to more explicitly denote that it
enables support for using the ISO test parameters.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add Zephyr 3.5 as a supported release until July 26th 2024, i.e. when
3.7 is planned to be released.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use Noto as baseline font and Inconsolata Nerd Font for source code.
These are both esthetically pleasing and have good Unicode coverage.
NOTE: Unsupported characters (i.e. emojis, at the time of this commit)
are rendered as tofu (i.e. a square).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
XeLaTeX is a TeX typesetting engine that extends LaTeX with support for
Unicode and modern font technologies such as OpenType.
It is included in all the LaTeX distro recommended for Zephyr so it is
safe to assume it is available to the user interested in building the
PDF documentation locally
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This is needed since commit f66b73197d
("drivers: hwspinlock: implement sqn hwspinlock driver") started
using it. Not sure how this got past CI.
Signed-off-by: Martí Bolívar <mbolivar@amperecomputing.com>
Add note to migration guide describing how to instantiate a ramdisk
using devicetree, and calling out Kconfig options that have been removed
with this change
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Become the maintainer for the jwt/json code. The json code has been in
tree for a while, and I am the author of the jwt code.
Signed-off-by: David Brown <david.brown@linaro.org>
Add migration guide notes for i.MX RT boards, including the following
changes:
- i.MX RT boards must now manually enable
CONFIG_DEVICE_CONFIGURATION_DATA and CONFIG_NXP_IMX_EXTERNAL_SDRAM
when required
- SNVS pin names have changed for i.MX RT11xx series boards
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Reorder the sections so that the core/wide impact ones come first (e.g.
Kernel and C-Library) and more specific ones (e.g. architectures) come
last.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add sections to the migration guide to make it easier to spot and follow
suggestions of specific areas.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix typo in nsim_hs6x_smp_12cores platform name (as previously
we had nsim_hs5x_smp_12cores platform mentioned two times)
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Reword VPX part as was requested by @abrodkin
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Added explicit code blocks throughout the document.
Removed several incorrect uses of "console" language where it should have
been shell or bat.
"console" is only for _bash_ sessions that include a prompt.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The 'console' language in pygments is for Bash shell session, i.e code
snippets were commands MUST start with a prompt.
The commands rendered by the ZephyrAppCommandsDirective do not include
a prompt, and should therefore be set as "shell".
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add required settings for telling the copybutton Sphinx extension to
ignore prompts when copying a code block.
Both bash prompt and Zephyr UART prompt are ignored.
Examples of the new behavior:
.. code-block:: console
$ echo "Hello World"
Hello World
The copied text will be: 'echo "Hello World"'.
.. code-block:: console
uart:~$ l2cap connect 29
Chan sec: 1
L2CAP connection pending
Channel 0x20000210 connected
Channel 0x20000210 status 1
uart:~$ l2cap send 3 14
Rem 2
Rem 1
Rem 0
Outgoing data channel 0x20000210 transmitted
Outgoing data channel 0x20000210 transmitted
Outgoing data channel 0x20000210 transmitted
The copied text will be: 'l2cap connect 29\nl2cap send 3 14'.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Release notes and migration guides go hand in hand right now, put the
file under the "Release Notes" area and exclude it from the normal
"Documentation" one.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Make sure devicetree, kconfig, etc. code snippets all have proper
pygments language set.
Note: only existing code-block:: directives have been updated. Another
pass should be made to address implicit code-blocks (`::`)
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
