Compile the `uart_dev` pointer only when necessary
(when `zephyr,log-uart` is used), this saves 4 bytes in
32-bit systems and 8 bytes in 64-bit systems.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Rename the `device` variable in the `struct lbu_cb_ctx` to
`uart_dev`, as it is a convention in Zephyr to not have the
struct variable name after the struct.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The test should work on any boards with UART console, so
increase the test coverage by adding `CONFIG_UART_CONSOLE`
filter and using `qemu_x86` as `integration_platforms` instead
of `platform_allow`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Updated the `LBU_DEFINE` so that the index is appended only
when given to improve backward compatibility.
When it is depending on the `zephyr,console` node, the backend
is defined as `log_backend_uart`.
When it is depending on the new `zephyr,log-uart` node, the
backend is defined as `log_backend_uart0`,
`log_backend_uart1`, and so on.
Updated the names of the internal variables to follow the same
naming convention.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
The sorted check code crashes on binary files. Add a check on file type
and only process text ones.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
When UART asynchronous API support was added to shell it was set up
to be the default one and was turning on asynchronous API if it was
supported. However, it may lead to complation failures if device
requires additional setup for asynchronous UART (e.g DMA in device
tree). Becuase of that, it is reverted back to use interrupt driven
API and use asynchronous API if it is already enabled in the
application.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
SMP shell was looking into internal shell uart structures to get
uart device. This structures are now internal to the shell and
cannot be used. Using device tree chosen instead.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Fixing compilation failure due to treating void pointer as uint8_t
array. Added missing casting.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Implement a workaround for Console harness to compose TestCase
identifier correctly when a Ztest suite with a single testcase
uses this harness type. Normally, a Ztest suite should use the
Ztest Twister harness.
Without this workaround each Ztest TestCase result on Console is
duplicated (and written into twister.json) with its 'identifier'
attribute set to TestSuite id only, no TestCase suffix added;
the resulting entry with the full TestCase id is also stored,
but its values are empty with defaults.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
If Console Harness 'harness_config' properties have no 'regex'
patterns or no correct 'type' set, then ConfigurationError exception
is raised, handled, and the test instance error is accounted
in the summary results.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Fix the Twister Console harness unordered pattern matching
to treat the ztest as failed when not all of the
expected patterns were found in the console output, but the ztest
application itself reports 'PROJECT EXECUTION SUCCESSFUL'.
Unify debug logging on pattern match for ordered and unordered patterns.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Let's replace the references to native_posix with native_sim,
in the introduction and beyond the getting started guide.
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's replace the references to native_posix with native_sim,
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
During this release native_sim is replacing native_posix
as the main host test/development platform.
Therefore, instead of basing the native_sim documentation
in native_posix's one, let's do it the other way around.
This commit mostly moves documentation from the native_posix
page into the native_sim one, changing the board and renaming
labels.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
In the sample, add overlays for native_sim, and add native_sim to filter
and as default integration platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
Enable this test in natives_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim.
And switch the overlays and default test platform to native_sim
from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim
Enable native_sim in the tests, and replace native_posix as integration
platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's replace the references to native_posix with native_sim in
the documentation, and enable this tests by default in
native_sim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* Replace native_posix references with native_sim
in arguments help messages
* For the seed parameter, correct platform check to accept
native_sim
* Use native_sim in twister tests
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Adds a shell interface for TLS Credentials, allowing management of
credentials via the Zephyr shell
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Add (internal) support for sectag iterating.
Also officially marks negative sectag values as reserved for internal
use.
This will allow a prospective TLS credentials shell to iterate over all
available credentials.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Adds an internal credential_digest for generating a string digest of
credentials.
Such digests would allow users of a prospective TLS credentials shell to
verify the contents of a given credential without directly accessing
those contents.
Offloading the digest process to the underlying backend allows backends
for which private portions are not directly accessible to be eventually
supported.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Internal flag (w1500_data.connecting) was not being set to false after
connection. Interface raises NET_EVENT_WIFI_CONNECT_RESULT event with
error status instead of NET_EVENT_WIFI_DISCONNECT_RESULT when
disconnection is manually requested (NET_REQUEST_WIFI_DISCONNECT).
Signed-off-by: Diogo Correia <diogo.correia@fraunhofer.pt>
* Fix app path in documentation
* Move the at24 emulator overlays to be general instead of
native_posix specific
* Switch default test platform from native_posix to native_sim
* From build only test, exclude platforms which are used
in the build and run test.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Switch the overlays and default test platform to native_sim
from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace the references to native_posix with native_sim.
Background: during this release native_sim is replacing
native_posix as the main host test/development platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This change capitalizes on newly added support for dynamic
thread stacks and the existing pthread support to provide
an implementation of the ISO C11 `<threads.h>` API.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
C library testing is mainly there to support what is
necessary to support Zephyr. We do test a variety of libcs
currently, which is where YAML comes in handy.
However, the main libc testsuite can be overkill for testing
some things, and might not be suitable for testing optional
features.
Create a 'common' subdirectory for common libc tests.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Add implementation to reduce CIG's CIS retransmissions so as
to meet the Host requested Maximum Transport Latency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
