Interrupt-driven mode was not working, and disabled by default.
When it was forced on, the behavior was to only have a few bytes:
as many as min(CONFIG_SHELL_BACKEND_SERIAL_TX_RING_BUFFER_SIZE, 9).
After the hardware FIFO was filled by software and emptied by hardware,
no interrupt occured, and enqueuing more data did never happen.
By letting the events enabled for TX (only), then interrupts are still
generated after the first transfer, and the software can then add the
subsequent transfers until all data is print: the UART works.
It does not generate endless interrupts either, which was tested by
adding litex_write8('%', UART_RXTX_ADDR) in liteuart_uart_irq_handler()
to log all interrupts events, and when there is nothing to print, no
interrupt is fired.
It was tested with the Zephyr shell.
Fixes#63794
Signed-off-by: Josuah Demangeon <me@josuah.net>
In some cases, the APPLICATION_BINARY_DIR does not match
the CMAKE_BINARY_DIR, in those cases the native simulator
build would not find the zephyr elf file.
Fix it by using the correct variable.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Create dedicated function, sysbuild_cache(), for handling sysbuild's
image specific cache file.
This provides a cleaner handling of said cache file, and provides a
mechanism for updating the cache file at later sysbuild CMake stages.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Use gpio toggle api instead of manually toggling.
Remove redundant text.
Print error and break from blinking if it occurs.
Only print 'how to exit' text if first toggle is successful.
Saves roughly 40 bytes.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
Usage:
gpio info [device]
The new command prints gpio controller information
for a specific device if specified or if no device is specified
it prints out all controller information ordered by line name.
Also added Kconfig option so this command can be removed if
resources need to be conserved.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
This commit implements this enhancement:
https://github.com/zephyrproject-rtos/zephyr/issues/63018
The forms of the gpio commands are now:
gpio conf device pin ol0
gpio set device pin 1
gpio get device pin
gpio blink device pin
Device name and pin subcommands now are
suggested/completed when tab is used.
Pin names are suggested with numbers and line names if
available from the gpio controller’s Devicetree node.
GPIO pin command is now limited to pins that are not assigned
as reserved.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
No issues with gcc but clang gives this error for
the *v4 variable few lines below.
.../lib/dns/mdns_responder.c:712:2: error: expected expression
struct net_context *v4;
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add virtual LAN support to the sample so that it is easier to
test the multiple mDNS listener feature implemented in previous
commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of just listening first network interface in the system,
install a multicast listener to all available network interfaces.
Fixes#18748
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add a helper macro that can be used at runtime to return
the number of network interfaces in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow user to bind to different network interface. This is
useful if binding a multicast address to a certain network
interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
nRF5340 SoC has `TASK_STOP` this patch implements disabling
watchdog for that SoC and enables allowing WDT to STOP in WDT setup.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
The field config of `nrfx_wdt_config_t` type is redundant in device
config structure. Instead of that local variable is used in the setup
function.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
This commit adds the RISC-V Platform-Level Interrupt Controller driver to
the RISC-V area of maintenance.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Symbopl tables of ELF objects of type ET_REL contain offsets instead
of addresses as for ET_DYN.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
A common pattern is used throughout llext.c:
ext->mem[ldr->sect_map[sym.st_shndx]]
where ldr->sect_map[sym.st_shndx] actually contains indices from
enum llext_section but ext->mem[] is indexed, using enum llext_mem
values. Fix this by changing ldr->sect_map[] to actually contain
enum llext_mem values.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
The symbol count in struct llext_loader is redundant, we already have
one in struct llext_symtable, accessible via struct llext. Remove the
redundant copy.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Simplify llext_copy_symbols() by using a local variable to store a
pointer.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Instead, `sc_indicate` is defined as a no-op when if would previously
not be defined.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Move a couple of automatic variable assignment off the declaration
block, leaves only structure aliases there, makes it a bit easier to
read.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Move the scan_cycles_idx increment in input_kbd_matrix_update_state
as it's only used there, use a modulo operation rather than the if to
handle the index wrapping condition.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Replace the wait_period_us clamping functions using a single CLAMP,
reposition the debug log as well.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
In the docs replace references to native_posix with native_sim
Switch the default test platform to native_sim from native_posix
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Replace native_posix with native_sim as the
default integration platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Instead of always enabling fuse for native_posix,
let's give users instructions on how to enable it
while building.
In the documentation: replace the references to native_posix
with native_sim, improve the links, mention the flash
simulator, and provide a separate subsection for FUSE access.
Add a separate test for the sample with fuse access enabled
and be sure it is possible to run both this and the basic
one with native_sim (was filtered out before for native_posix)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For native_sim we need to have the fuse library linked with the
native simulator runner, not with the embedded code.
Let's fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
DTLS Connection Identifier support requires DTLS stack
that supports it. MbedTLS support in Zephyr is already
ported in, also some offloaded sockets support it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
After some further investigation, I could find the current solution to
enable zbus channels (by using ZBUS_CHAN_DECLARE) to be used in C++
files, which generates a warning when we mix C and C++ code. This fixes
the issue by using an approach to add the extern keyword only when the
file is being compiled with a C++ compiler.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
For some STM32 MCUs the busy flag of SPI is unreliable. This is a known
issue of the device and described in the device errata.
As a fix implement a configurable timeout which ensures that a call
to spi_transceive will eventually return.
Fixes#64927
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
Remove syscalls that allows user threads to set callbacks that
will be invoked by the kernel.
Userspace is not trusted we can't allow a user thread set callbacks
that will be invoked by the kernel and run with supervisor privileges.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Coverity issues need to be resolved and closed by owners, not by the
bot. Other wise we will continue scanning them and reporting them over
and over.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit 415b6fc945.
This does not even compile as it attempts to do assignment to a read-only
object (config->config.behaviour).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
