Enable the pdflscape package (available in the Latex distros recommended
for Zephyr) to allow for some pages to be rendered in landscape mode.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The WS2812 LED strip driver does not use a scratch byte, therefore
free up a byte per pixel which was unused except in the GPIO-based
driver whereby it is used
Signed-off-by: Jamie McCrae <spam@helper3000.net>
Enable a condition as define dma_callback function only if
any one instance of ns16550 has dmas parameter in dts.
This resolves conflict of dma_callback function defined but
not used warning in case of UART_ASYNC_API enabled but dmas
parameter is not provided to any ns16550 UARTs dts instances.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
Removed if (IS_ENABLED()) and used #if as they are causing CI failures
and removed LPSS related functions which are not under LPSS config.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
This test needs to include zephyr/kernel/mm/demand_paging.h, not
zephyr/kernel/mm.h, due to its use of k_mem_pin().
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
By making short inputs optional, the user can bypass short-events all
together if necessary (e.g. custom button-press listener).
Signed-off-by: Juliane Schulze <juliane.schulze@deveritec.com>
Reference counting was broken when adding the enable delay.
Now reverted to previous pattern.
Signed-off-by: Andy Sinclair <andy.sinclair@nordicsemi.no>
Add Nuvoton guys, TomChang19 and alvsun, in collaborators of Nuvoton
NPCX Platforms and remove MulinChao and ChiHuaL since they are already
the maintainers.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Extend Twister command line with --pytest-args. This parameter
is passed to pytest subprocess. It allows to select a specific
testcase from a test suite.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Make Jlink a default runner for lpcxpresso55Sxx.
The LinkServer runner command line tool does not support .hex flashing.
This feature is planned for LinkServer v1.6 (July 2024).
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Test expects that there are no other backends enabled and some
may be enabled by default.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add the overlay for running the samples/subsys/nvs/ application
on the nucleo_g31rb. Define a 6kB storage_partition at the end
of the 128kB flash.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Several scenarios in this test require specific external flash chips
to be connected to the nRF52840 DK. Specify proper fixture for them
so that they are not performed on the board without those required
external components connected.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This is a follow-up to commit 7a83724e0f.
This overlay uses an alternative connection (via spi2) for the external
flash present on the nRF52840 DK and it needs to use one of the QSPI
pins as GPIO, to get CS line control in the SPI communication. To make
it possible, that GPIO must be removed from those marked as reserved.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This moves including of demand_paging.h out of kernel/mm.h,
so that users of demand paging APIs must include the header
explicitly. Since the main user is kernel itself, we can be
more discipline about header inclusion.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Due to arch_syscall_invoke are declared static, if there are
no corresponding definition, compiler will complain. It has
been working fine so far because arch/syscall.h is included
indirectly through some other headers (especially through
generated syscall stubs). However, with enough header files
shuffling this becomes an issue. So include arch/syscall.h
in arch_interface.h explicitly.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove limitation of enabling FP when building TF-M NS application.
FP support have been fixed in the tf-m-tests repository for NS
application.
Board support for NS executable may still be lacking for some boards.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Despite what the TF-M documentation says about SFN model not supporting
Floating Point, it does support it, according to TF-M developers.
Remove SFN limitation not supported with FP Hard ABI.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This patch changes readme files of nRF91x1 dev kits to highlight
their added NR+ feature.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
zephyr/net/socket_types.h file also includes _timeval.h, but it uses
correct path/filename depending on configuration.
Signed-off-by: Kamil Rakoczy <krakoczy@antmicro.com>
This commit adds support for more STM32 CPUs that has
a different DMA interface. This was tested only for
the nucleo_l476rg.
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
Previously the STM32 DMA driver was dependent on a very specific
name for the DMA in the DTS. This hidden requirement has caused
a bit of confusion. This commit changes the driver to instead
always use the first DMA listed in the ADC node's dma property.
Should fix: #65387
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
Some drivers like the ADC access the DMA through it's index
and not the DMA name. This commit add some better support
for such instances.
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
Initially, the command/reply ID byte was not part of the data length
macros. But later, when it was changed to include it, the buffer length
checks was not adjusted. Due to this, we were not using the last byte in
the buffer. Fix this issue by correcting the condition.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
Commit c7fec71193 ("mgmt/osdp: Add length checks for commands and
replies") attempted to remove code duplication by adding a macro to perform
a length check. At the time, a CI linter did not like macros with control
flow so the code was switched to a method which called __ASSERT() on this
condition.
The __ASSERT() macro is a nop if CONFIG_ASSERT=n (which is the default) and
causes the buffer access to be unguarded which may lead to OOB accesses.
This patch fixes the issue by reintroducing the if check.
Fixes: c7fec71193.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
Add MCUBOOT_IMGTOOL_OVERWRITE_ONLY Kconfig option which
passes the --overwrite-only option to imgtool to avoid
adding the swap status area size when calculating overflow.
It is used by non-swap update modes.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Add a simple existence check that pthread_atfork() has
some kind of implementation. The function is mandatory
by all conforming POSIX systems.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Mark pthread_atfork() as supported in the documentation.
This option is a mandatory requirement (i.e. it must be present)
even when calling it produces undefined behaviour. That is the
case here, and documentation sbould be updated to reflect that.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
pthread_atfork() is required by the POSIX_THREADS_BASE
Option Group as detailed in Section E.1 of IEEE-1003.1-2017.
The POSIX_THREADS_BASE Option Group is required for PSE51,
PSE52, PSE53, and PSE54 conformance, and is otherwise
mandatory for any POSIX conforming system as per Section
A.2.1.3 of IEEE-1003-1.2017.
Since Zephyr does not yet support processes and (by extension)
fork(), this implementation includes a deviation and should be
categorized as producing undefined behaviour.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Revise the structure of the POSIX API docs. This separates
related items out to dedicated pages. Further improvements
could yet be made - e.g. using the 'collapse' feature to
expand and collapse large sections of text or tables.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
These are not needed and are now causing build errors since the
pm_device calls are always there and need the header to become a no-op.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Fixes an issue whereby a board revision is 0 and the overlay file
exists but would not be included
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Zbus uses mutexes internally that are available
only when MULTITHREADING is enabled so add
it to fix the following error:
/opt/zephyr-sdk-0.16.3/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/
12.2.0/../../../../arm-zephyr-eabi/bin/ld.bfd: zephyr/subsys/
zbus/libsubsys__zbus.a(zbus.c.obj): in function `k_mutex_init':
/builds/zephyr/mcuboot/zephyr/include/generated/syscalls/kernel.h:969:
undefined reference to `z_impl_k_mutex_init'
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
The pm_policy_state_lock_put and pm_policy_state_lock_put functions
already become a no-op if CONFIG_PM is not enabled. Drop the guards
around it in few different drivers.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Update Zephyr fork of MCUboot to revision:
47b34362552835621bc289d53d2127691088cb7c
Brings following Zephyr relevant fixes:
- 47b34362 zephyr: kconfig: Prevent MBEDTLS selection when
tinycrypt is used
- cd82f8bf boot: zephyr: add support for lpcxpresso55s28
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Prevents allowing the user to enter a signing key when the signing
mode is set to hash check only without signatures
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Fixes wrongly setting configuration to generate an unsigned image
in the MCUboot configuration when this does not apply to MCUboot
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Added modifications to support async apis for ns16550
on RPL-s using LPSS DMA.
Signed-off-by: Anisetti Avinash Krishna <anisetti.avinash.krishna@intel.com>
Adding myself as a collaborator on ARM arch so that I can help maintain
the aarch32 cortex-a/r codes.
Signed-off-by: Huifeng Zhang <Huifeng.Zhang@arm.com>
