Adds the device trees, Kconfig, and documentation files.
The following features have been confirmed working on hardware:
* LED
* Button
* UART
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
If $BASH_SOURCE is the empty string, then those two tests end up with
the same simulation ID. That's not a good time.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
With extremely small displays (much smaller than 64x24), the
calculation of the blocks in the four corners fails. These
might then be too large and no longer fit into the available
area of the small displays.
Signed-off-by: Stephan Linz <linz@li-pro.net>
In exceptional cases, monochrome displays can deviate from the
general interpretation (PIXEL_FORMAT_MONO01) of a logical 1 as
pixel on (white) and 0 as pixel off (black) and instead set the
capability to PIXEL_FORMAT_MONO10. This small but significant
difference has been ignored so far, resulting in an inverse
display for those displays. In order to be technically correct
here, the buffers for a "white" background should be set to 0
instead of 1 and for "black" to 1 instead of 0.
Signed-off-by: Stephan Linz <linz@li-pro.net>
Rounding errors due to the division of non-integrally divisible
buffer sizes lead to the loss of one byte. This can be avoided
with the DIV_ROUND_UP() macro.
Signed-off-by: Stephan Linz <linz@li-pro.net>
Commit 447a492 switched to `sys_cache*` to enable caches at SoC init. To
preserve the old behavior of enabling caches at init, is missing to
select `CONFIG_CACHE_MANAGEMENT`.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
A 1KHz counter is present in the LPC RTC.
Add support for this counter to get better
resolution for certain applications.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Add support for the 1KHz counter. Update the RTC
driver to allow the 1Hz and high resolution counters
to exist together.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
A 1KHz counter is also available inside the NXP LPC RTC
block. Add a binding to support that counter.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
In order to avoid build failures as described in issue #67242,
make all ST drivers using HAL_ST module dependent to HAL_STMEMSC
and HAS_STLIB libs, which need to be configured in all samples
referring to them.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
ARM GCC version 12.2.0 (Zephyr SDK 0.16.4) generates the following build
warning from the strncpy call in "wifi_utils_parse_scan_bands":
warning: '__builtin_strncpy' output truncated before terminating nul
copying as many bytes from a string as its length
To resolve this warning, pass the maximum length of the temporary
parse_str buffer to strncpy. This also has the benefit of correctly null
terminating parse_str, since we already verify the
scan_bands_str is properly null terminated with the strlen() check in
this function. We can therefore remove the line adding a null terminator
to parse_str as well.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for DYNAMIC_INTERRUPTS and ARM specific
DYNAMIC_DIRECT_INTERRUPTS.
Co-authored-by: Radosław Koppel <radoslaw.koppel@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ull_prepare_dequeue to not skip events when preempt
does not match the event in the head of the prepare queue.
The head of the prepare queue does not match when
ull_prepare_dequeue has put the head of the queue to the
last of the queue when it is calling lll_resume interface.
This happens when there is already an active event which
needs a preempt timeout to be setup and there is another
non-resume event in the pipeline which now becomes the
head. The fix ensure to restore the order of the events
if a preempt timeout was to be setup.
Currently ull_prepare_dequeue loops through all events
before stopping at the original way the queue was. This is
not efficient and is a scope for improvement in future.
This reverts commit 91781306e9 ("Revert "Bluetooth:
Controller: Fix ull_prepare_dequeue for skipped events"").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Power profiles enable the app to dynamically switch modes and support
DVFS. These profiles leverage the PCA9420 PMIC to change the VDDCORE
voltage, and optimize power consumption. Two runtime profiles are
provided for the application:
* main_clk sourced from FRO192M, VDDCORE at 0.9 V
* main_clk sourced from FRO96M, VDDCORE at 0.8 V
Both profiles use the FRO, and the FRO is retrimmed with the target
frequency when switching profiles.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
Set align to 1 for CONFIG_MCUBOOT_IMGTOOL_OVERWRITE_ONLY,
used by non-swap update modes.
Fix imgtool error message for device with write size > 32B.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Add emulation testing for it8xxx2, npcx, and mcp7940n. The test is made
to be generic and uses the backend API in order to verify both read and
write functionality. Additional tests are made for the API's limits when
reading/writing out of bounds.
Fixes#65018
Signed-off-by: Yuval Peress <peress@google.com>
Adds a stub API for a non bus emulators. The stub is used to keep the
rest of the emulation consistent.
Signed-off-by: Yuval Peress <peress@google.com>
Because it was exclusively used by the "common" RISC-V privileged code
to build CPU idle routines that are now handled by arch level code.
Also, all platforms defaulted to "y", making it pointless in practice.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
While going to idle may require SoC specific implementations, provide a
more sensible default implementation.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Rework CONCAT to accept multiple arugments which are concatenated
together. Number of arguments is limited to 8.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This polishes doxygen to, hopefully, make it better looking
on the API doc. Also adds missing doc to various functions
and macros.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Force include interface header files first before other files
under include. This is due to doxygen always using the first
found item during linking. Because of this, without forcing
the interface definitions first, almost all of these would
link to the same named items, for example, under ARC header
files instead. Hence the need to manually shuffle the items
so linking would actually link to the correct items.
Note that this only works with functions and macros that are
actually defined in the interface file. A simple doc section
with @def would not work as this is not an actual definition.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves the doxygen doc from atomic_builtin.h to
atomic.h, as the doc should not have been inside
a particular implementation.
Also add an alias @atomic_api to replace the repetitive
wordings in the doc.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If a collaborator removes themselves from the reviewer list, do not
attempt to re-add them on changes to the PR.
Fixes#67214
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
