Even though we are passing mandatory args from the shell registration,
due to use of getopt the check can be bypassed without the hyphenated
options.
So, enforce and fail if mandatory parameters aren't passed through
getopt.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Major development work is concluded for Twister tests.
We should release appropriate information.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
SiyuanCheng-CN is no longer working for Synopsys
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
RAM disk access is always enabled on qemu_x86_64, so checking for it first
means that NVMe is never selected.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
This will allow expansion of various ZTEST macros to display the actual
test function rather than the ZTEST macro itself.
Inspired by a change in #71402 by @gmarull.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add support in bsim compile script to accept EXTRA_CONF_FILE
so that overlay conf files can be supplied at compile time.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for using sysbuild for central_hr and
peripheral_hr samples so that hci_ipc sample is built
for nRF53x SoCs boards.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update central_hr sample to support using extended
advertising and hence be long range compatible on SoCs
that support Bluetooth Low Energy Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add LED blinking state to peripheral_hr indicating
advertising state, and LED On state to indicate connected
to a central device, respectively.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update peripheral_hr sample to support using extended
advertising and hence be long range compatible on SoCs
that support Bluetooth Low Energy Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Change default to using advertising coding in ACL connection
when establishing connections on Coded PHY.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add missing check for Coded PHY support when creating
extended advertising set.
Added a fallback in Controller for upper layers requesting
Coded PHY while Controller is implemented without Coded PHY.
In this case, 1M PHY will be used in extended advertising
for testing purposes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In some cases, Twister would report twice the amount
of testcases run than expected, with half of them
lacking any status.
This change fixes erroneous ELF testcase name extraction,
which deleted every instance of 'test_' in the name,
rather than just the first.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
testing_device_lock is no longer used and the logic
using it is never used / needed. Just remove it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Adds a config that enables sending the object version for all objects.
According to LwM2M specification v1.0 and v1.1, non-core object versions
other than 1.0 'must' be provided, while all other versions 'may' be
provided. With specification v1.2, a client 'can always attach Object
Version Information'. Or in other words, it is OK to always report the
object version with all specifications.
Signed-off-by: Andreas Rudolf <andreas.rudolf@husqvarnagroup.com>
Mass Storage enumeration failed because udc_stm32_ep_mem_config() was only
increasing priv->occupied_mem on endpoint enable, and not decreasing it on
endpoint disable. Fix the issue by decreasing priv->occupied_mem
on endpoint disable.
Signed-off-by: Arne Bohnsack <arne.bohnsack@draeger.com>
Real Time peripherals should be enabled by default.
Add a common initialization point for all VPRs and enable them.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
Added DTS of PDK's mx25r64 flash memory.
Memory is described under spi00 peripheral and
can be controlled used flash spi_nor driver.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Updated the frdm_mcxn947 with support for the
CTimer counter.
Signed-off-by: William Tang <william.tang@nxp.com>
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Updated dts for MCXN94x with support for CTimer.
Signed-off-by: William Tang <william.tang@nxp.com>
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
After moving to HWMv2 em_starterkit_emsk_em11d_defconfig file was omitted.
Some of tests for the emks_em11d platform became broken.
This PR fixes https://github.com/zephyrproject-rtos/zephyr/issues/71753
Signed-off-by: Nikolay Agishev <agishev@synopsys.com>
Ignore LE 2M PHY being set in Initiating_PHYs of the
LE Extended Create Connection command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adapts flash writing for BLOB IO to RRAM. The previously used write
block alignment is not needed for RRAM.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
An audio stream is unidirectional, so it's always either
TXing or RXing, so the fields can safely be moved to an
enum.
The struct now has both a is_rx and is_tx field. The reason
why two bools are being used, is that the both of them may
be false (we need 3 states).
All access to the rx and tx structs in the union shall be
guarded by these fields.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
There are several esp32-based boards that its conf and overlay
files are missing proper renaming to match cpu cluster.
This also removes all _SOC_ name from files.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Added write of strobe register after setting long press reset
configuration. This is needed to apply the new value.
Signed-off-by: Andy Sinclair <andy.sinclair@nordicsemi.no>
IRQ handling functions are now in interrupt controller.
Enable necessary KConfigs to support CLIC properly.
A nice side effect of enabling RISCV_PRIVILIGED is that
`vector.S` is no longer necessary as common code handles
that.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
We could start executing the work item after the channel has been
disconnected or destroyed, due to a race condition.
Double-check we are connected before attempting to send data.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This check is repeated many times in `gatt.c`, with various comments.
This patch refactors these occurrences into a named function.
Resolves: https://github.com/zephyrproject-rtos/zephyr/issues/41789
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
We can't just keep blocking the syswq, people be mad.
Override the timeout value so we always have K_NO_WAIT.
Also print a message to whomever's listening.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
OTS requires that indications about state change are sent after
response to ATT Write.
OTS Specification p.4.4.4.: "An OLCP or OACP operation is started
when the ATT Write Response is received from the Object Server as
a result of the Object Client writing an Op Code to a control point
to perform some desired action. The control point operation ends
when the Object Server sends an indication to the Object Client
with the Op Code set to Response Code."
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
To make it easier to understand the code, the following was done:
- Use INITIATING/ADV for state names that are exclusive to central
or peripheral. Previously it was not necessarily clear that the state
BT_CONN_CONNECTING was for central only by just looking at where
it was used. The terms INITIATING/ADV were used in favor
of central and peripheral as these terms also work for SCO connection
establishment.
- BT_CONN_CONNECTING_SCAN -> BT_CONN_SCAN_BEFORE_INITIATING
to make it more clear that we are not scanning and connecting at
the same time. The new name should make it more clear why we are
scanning - only with the intention to start the initiator later.
- BT_CONN_CONNECTING_AUTO -> BT_CONN_INITIATING_FILTER_LIST.
This makes it clear that this state is something different than
BT_CONN_AUTO_CONNECT.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
