The bt_has_register_param was renamed to bt_has_features_param
recently. Fixes build errors.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
The host app should increment the sequence number within SDU interval
whether it has any data to send data to the controller or not.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Fix incomplete reset cause to be reported for NXP MIMXRT1062-evkb.
In the event of a reset due to core lockup
or software reset request on a 1062 board,
the current NXP hwinfo driver reports an incomplete
reset cause (only Ipp reset pin).
This is happening because the 1062 uses a combined CPU lockup
and system reset request register bit that should be checked,
whereas the current driver only checks for the existence
of a lockup-only status bit.
This commit adds a check on the flag
FSL_FEATURE_SRC_HAS_SRSR_LOCKUP_SYSRESETREQ
already present in MIMXRT1062_features.h,
to report such a reset cause should it occur.
Signed-off-by: Casper Egholm Jørgensen <cjo@trackman.com>
Add TEST_WORK_ITEM_WAIT_MS and TEST_SUBMIT_WAIT_MS config parameters
instead of hardcoded timeouts at kernel.workqueue test to allow its
customization on slow simulated platforms.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Add a native way to log Host Command communication.
Use Zephyr logging system to do it. Use debug and normal levels.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Use one common function to send Host Command response. It allows
handling all response types within one function.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Add a configuration option to set Wi-Fi as default interface and also
add an API to get first available Wi-Fi interface.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The API should be defined independent of L2_PTP define, this fixes build
error and also the doc error, as the next function will have two doxygen
headers.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Identify the Wi-Fi capability to the networking stack and also the type
of Wi-Fi (Native vs Offloaded), this helps identifying Wi-Fi interfaces
that can be used by applications.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Wi-Fi is based on L2 Ethernet, so, all drivers are registered as
Ethernet L2, but in order to distinguish true Ethernet and Wi-Fi
devices, add a L2 type within Ethernet.
Also, handle offloaded net devices that also offload Wi-Fi.
This approach is better than adding a new Wi-Fi L2 as that would mean
invasive changes which are unnecessary.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Currently we provide incorrect stab value of z_is_inactive_timeout
in case of the configuration without system clock
(CONFIG_SYS_CLOCK_EXISTS=n). This prevents threads from being
scheduled (we don't even schedule main thread in hello world
example if CONFIG_SYS_CLOCK_EXISTS=n).
Fix that.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
As per table 4.2 in BAP v1.0.1, the BAP unicast client shall
support at least 2 (> 1) endpoints in either direction if it
supports that direction.
Since Kconfig does not support such requirements (0 || > 1),
this is done using a BUILD_ASSERT.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The find_package_handle_standard_args function is used in FindLlvmLld
without being imported. This may cause FindLlvmLld to fail
non-determistically based on if it's evaluated in a CMake build/process
before find_package_handle_standard_args is included.
We should include what we use. Explicitly include
find_package_handle_standard_args.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Pause and resume functionality was written into assumption
that sockets are closed before resuming.
With use new options CONFIG_LWM2M_RD_CLIENT_STOP_POLLING_AT_IDLE
or CONFIG_LWM2M_RD_CLIENT_LISTEN_AT_IDLE this is not always true.
Fix the state machine, so that on those cases, sockets are not
closed and resume is always similar like from the QUEUE mode.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add support for using X509 certificates.
Default settings use ECDSA certificates with SHA256 hash.
When different settings are required clients should overwrite
struct lwm2m_ctx->load_credentials() and
struct lwm2m_ctx->set_socketoptions()
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Most AP's are not sending proper HE triggers or stopping triggers after
sometime, so, change the default to non-triggered based TWT.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Usage of 64-bit address constants from devicetree without
an UINT64_C wrapping macro results in the following warning
and the cut-off of the address value:
"warning: integer constant is so large that it is unsigned"
This change fixes such issue for PLIC, MTIMER and UART in case
they are used with some 64-bit RISC-V platforms
Signed-off-by: Alexander Razinkov <alexander.razinkov@syntacore.com>
Usage of 64-bit address constants from devicetree without a
UINT64_C wrapping macro results in the following warning and the
cut-off of the address value:
"warning: integer constant is so large that it is unsigned"
This change extends devicetree API adding few wrappers over the
address constant getters which add ULL size suffix to an
address integer literal when the appearance of 64-bit address
values is possible
Signed-off-by: Alexander Razinkov <alexander.razinkov@syntacore.com>
The functions pthread_mutexattr_destroy()
and pthread_mutexattr_init() are implemented (they just do nothing).
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The functions pthread_condattr_destroy()
and pthread_condattr_init() are implemented (they just do nothing).
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
_POSIX_THREAD_PRIO_INHERIT was mistakenly marked supported in
commit a07774eada presumably because we have prototypes for the
functions below.
pthread_mutexattr_getprotocol()
pthread_mutexattr_setprotocol()
However, the functions are not actually implemented in Zephyr.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The link to the zephyr_licensing page was broken
=> fix it.
Also add a relatively evident if to the list:
There is no need to add an entry to the licensing
list if the integrated code is Apache 2.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
There is no get_maintainers.pl in the tree, and
hasn't been for as long as the git history lasts.
Remove its mentiona as a GPL component.
get_maintainers.py is Apache 2.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Extended parsing of report.xml file - produced by pytest-twister-harness
plugin. Now testcases are properly extracted and added to twister
report. Added unit tests.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Add call to zephyr_syscall_header to kscan driver CMakeLists.txt, so
that the required syscalls will be generated when kscan drivers are
used.
Fixes#59710
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove uart overlay and add the node to base dts and config.
Now, it can be used for multiple samples.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
If the remote responds with and security related error the stack tries
to increase the security level to satisfy the remote permissions.
This fixes missing ATT timer reset on security related ATT Error
Response as the ATT operation is considered as complete.
< ACL Data TX: Handle 0 flags 0x00 dlen 7
ATT: Read Request (0x0a) len 2
Handle: 0x0084
TMAS: Role
> ACL Data RX: Handle 0 flags 0x02 dlen 9
ATT: Error Response (0x01) len 4
Read Request (0x0a)
Handle: 0x0084
Error: Insufficient Authentication (0x05)
TMAS: Role
Error code: 0x05
< ACL Data TX: Handle 0 flags 0x00 dlen 6
SMP: Security Request (0x0b) len 1
Authentication requirement: Bonding, No MITM, SC, No Keypresses
= bt: bt_att: ATT Timeout
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
If connection reference is acquired from `bt_conn_lookup_addr_le` but
`bt_gatt_ccc_cfg_is_matching_conn` return false the connection was not
unreferenced properly. This commit fix the issue by unreferencing the
connection if the condition is false.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
