Adds a guide on how to make out-of-tree MCUmgr function handlers
and groups, with an example showing a test implementation.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds a test that tests a build-only configuration of an
application which uses custom handlers is able to build, and
can be referenced in documentation.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This adds a Kconfig to introduce the Xtensa specific
arch_spin_relax() which can do more NOPs. Some Xtensa SoCs
may need more NOPs after failure to lock a spinlock,
especially under SMP. This gives the bus extra time to
propagate the RCW transactions among CPUs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Associate command handler did not validate the provided address length.
In result, if provided address string was longer than the expected
extended address size, strncpy() would not NULL terminate the buffer,
which could lead to unexpected behavior in parse_extended_address(), as
it expects NULL terminated string.
Fix this by validating the length of the provided address string before
parsing.
Additionally, make parse_extended_address() return the parsing result,
so that it can be detected when provided extended address has incorrect
format.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The Codec Specific Configuration Parameters provided by server was
not copied at bt_ascs_config_ase. Detected by PTS in BAP/USR/SCC PTS
test cases, because no LTV values appeared in ASE Codec Configured
notification.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Create clock_stm32_ll_mco.h file to bring stm32_clock_control_mco_init,
mco1_prescaler, mco2_prescaler, MCO1_SOURCE and MCO2_SOURCE definitions
which were previously in clock_stm32_ll_common.{c,h}. This is done so that
stm32_clock_control_mco_init can be called from clock_stm32_ll_h7.c.
Also update Kconfig.stm32 and add new MCO sources to allow H7 support.
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
Make #defines properly Doxygen-documented, add some named groups, and add a
few missing comments to some #defines.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Split the BT_APPEARANCE_* doc on two lines as several lines were
dangerously close to 100-character line limit + some constants were
misaligned.
This makes follow-up commit possible without breaking code formatting
rules.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
To demonstrate how to configure Zephyr to use the IPM
driver over the IVSHMEM subsystem. Since this driver
is intended to generate inter QEMU VM notifications
it was better to create a sample app using the shell
for quick demonstration for the users.
Signed-off-by: Felipe Neves <felipe.neves@linaro.org>
This driver is built on top of the IVSHMEM doorbell
notification mechanism providing an unified way
to generate inter VM interrupts.
Signed-off-by: Felipe Neves <felipe.neves@linaro.org>
If a timer is left running on an stm32mp1, (most likely) on the next run
the timer is stuck.
A simple timer reset before initialization fixes the issue.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Replaces the manual lookup function with a lookup function which
is provided when registering MCUmgr handlers which can be used to
find the function to translate error codes, allowing out of tree
MCUmgr handlers to provide error translation handlers.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The PM hooks were guarded with CONFIG_PM_POLICY_CUSTOM, however, they
need to be guarded (if file is always compiled) with CONFIG_PM. In fact,
CONFIG_PM_POLICY_CUSTOM requires to implement a custom policy hook,
something this module did not provide.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Remove unnecessary __weak attribute from power management functions.
These functions are now defined once, globally, and mandatory for
systems that support CONFIG_PM.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Any system supporting PM must now implement
pm_state_set/pm_exit_post_ops. Before this change any platform could
enable CONFIG_PM=y, even though it did nothing, ie, no power savings at
all.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Dummy inline functions are useful to avoid ifdeffery in code when a
certain option is not available. pm_state_set/pm_state_exit_post_ops,
are only called from the PM subsystem, so never called if CONFIG_PM=n,
that is, never surrounded with ifdeffery.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Some tests provide their own PM hooks, adapted for testing purposes. Add
a new option to select HAS_PM, so that CONFIG_PM can be enabled.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add a new Kconfig option that has to be selected by SoCs providing PM
hooks. This option will be now required to enable CONFIG_PM. Before this
change, CONFIG_PM could always be enabled, regardless of SoC providing
any kind of low-power support.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Limit the testcase to targets with more than 32KB RAM
Because of the CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE 8192,
the RAM used by the testcase on a too small target might fail
at runtime. For example on a nucleo_l073rz target:
RAM: 15292 B 20 KB 74.67%
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This allows for builds with CONFIG_SYS_CLOCK_EXISTS=n in which case
busy waits are achieved with a crude CPU loop. If ever accuracy is
needed even with such a configuration then implementing arch_busy_wait()
should be considered.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Linuxptp report UTC offset is 9472 seconds, is a byte order issue,
The right value is 37. Also fixed offset_scaled_log_var byte order.
Signed-off-by: Chen Caidy <chen@caidy.cc>
According to IEEE802.1AS Table 11-6 and 10.6.2.2.9,
802.1AS using peer-to-peer delay mechanism, two-step clock,
Grand master clock should keep this correction_field as zero.
Signed-off-by: Chen Caidy <chen@caidy.cc>
According to IEEE802.1AS 11.4.4.2.1, we need fill
preciseOriginTimestamp as syncEventEgressTimestamp.
In this follow_up message, prec_orig_ts need to filled
from net_pkt_timestamp(sync) for best accuracy. state machine
is software trigger with insufficient precision.
After this change, a grand master endpoint sync accuracy
increase from 3.5ms to 580ns with mimxrt1050_evk board.
Signed-off-by: Chen Caidy <chen@caidy.cc>
When ENET_ENHANCEDBUFFERDESCRIPTOR_MODE enabled,
MAC will automatic capture receive nanosecond from 1588TMR
and return back to ENET_ReadFrame. It is a highest accuracy
recv timestamp_ns, we do not need manually read from 1588TMR.
By this change, receive timestamp accuracy increase
from 20us to 200ns above.
Signed-off-by: Chen Caidy <chen@caidy.cc>
Cleanup doxygen documentation by adding missing comments + enabling
docs for fields guarded by CONFIG_SCHED_THREAD_USAGE_ANALYSIS.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
