Move a few unicast functions around so that we reduce the number
of #if defined guards. No code has changed, but a single
prototype has been added.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add two new Kconfigs: BT_ISO_CENTRAL and BT_ISO_PERIPHERAL
that is used to do central or peripheral only builds,
similar to the BT_CENTRAL or BT_PERIPHERAL Kconfigs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Updated PSoC 6 implementation to use hal_infineon/mtb-pdl-cat1
This PR is reflected changes according to Task#1 for RFC#42883.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
On Espressif SoCs, the pin controller is a virtual device.
Pin settings are actually controlled in a distributed way.
Therefore, that node does not belong to the SoC bus.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Add 'inversion-on' property to st7735r.
Issue INVON(21h) command on initializing if inversion-on was enabled.
As a result of this command, the display color is inverted.
Otherwise, INVOFF(20h) will be issued.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Add dt_chosen_has_compat kconfig helper function. This function checks
if a given `chosen` node has a provided compatible string in its
compatible list. Returns "y" if compatible string is present, and "n"
otherwise.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Works just fine if I point it to the default install path from
the Arm GCC installer which contains several spaces.
"C:\Program Files (x86)\GNU Arm Embedded Toolchain\x.x.x\"
The previous notice about not using spaces made sense to have this
very specific path but this might confuse people who install
ARM GCC with the provided installer which puts it into a path
under C:\Program FIles, to avoid people moving their installation
and possibly breaking a different setup I thinks its good
to make that clear that this is not a hard coded assumption
made across Zephyr and is just a matter of an ENV variable.
Signed-off-by: Timon Skerutsch <timon@diodes-delight.com>
Co-Authored-By: Stephanos Ioannidis <root@stephanos.io>
When updating `sys.path` to allow importing the pickled edtlib instance,
add the path to the front of `sys.path`, not the end. This ensures that
the `devicetree.edtlib` module that is imported is the one relative
to the files being run, not some other version which may exist on the
path.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The documentation has wrongly stated that the function uart_poll_in() is
also a blocking function. The uart_poll_out() is indeed a blocking
function but uart_poll_in() has never been since day one.
Make it clear that the uart_poll_in() is a NON-blocking function, and
uart_poll_out() IS a blocking.
This fixes#45468.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Now that we have partially oerhauled twister in the tree, modify actions
with new options:
- not reporting filtered tests is now default
- output is json, not csv
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit renames the 'Microchip Platforms' entry to 'Microchip
MEC Platforms' since this entry is specific to the Microchip MEC family
devices.
This is in preparation for adding an entry for the Microchip (formerly
Atmel) SAM family devices.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the label name in the 'Nuvoton_Numicro Platforms'
entry to match the actual GitHub label name, which is 'platform:
Nuvoton Numicro Platforms'.
In addition, the entry name is also updated to match the label styling
(underscore is removed).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the label name in the 'Nuvoton_NPCX Platforms'
entry to match the actual GitHub label name, which is 'platform:
Nuvoton NPCX Platforms'.
In addition, the entry name is also updated to match the label styling
(underscore is removed).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the label name in the 'nRF52 BSIM' entry to match
the actual GitHub label name, which is 'platform: nRF52 BSIM'.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
For CI and for the condensed version of the report, consider built tests
as passed and do not mark them as skipped. Tests that are built only
will be reported as skipped in the full and suite reports.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Filtered tests are now not being reported by default to allow generation
of reports that are easier to parse and work with in different tools.
The complete filtered set of tests is still available in the json output
for review and verification.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This was forgotten from an early overhaul, fix this as
connected_hardware attribute does not exist anymore.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We have been generating reports with the platform being used as the
testsuite, ie. all testcases would land under one single big testsuite,
which is very difficult to use or read.
This change uses testsuites as intended and does that for each defined
testsuite (or scenario). Platforms are added as properties among other
things.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When loading tests from json file we want to reset the reason for those
tests that are to be run and remove whatever we had when the test was
only built.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
we mark built only tests as skipped, however, the type was still the
same as other skipped tests, set this to 'built' to indicate the tests
was only built.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove some legacy code and set status and failure/skip reason directly
without set_state and get_state.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Handle build errors due to overflows correctly and do not report those
as failures if not requested.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When we have a build failure or anything that would prevent execution of
the test, set the status for all subcases accordignly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
twister now exports json instead of csv, so we make the testplan read
the json data and generate the consolidated plan for the workflow.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Report misconfigued testsuites and subcase parsing issues instead of
erroring out. This should help us fix those tests and then enforce
accurate result capturing.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
