Following zephyr's style guideline, all if statements, including single
line statements shall have braces.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Following zephyr's style guideline, all if statements, including single
line statements shall have braces.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Replace eswifi_gpio with gpio_dt_spec. We can replace devicetree
label based access with this change as we try and phase out the
usage of the 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
when the dma channel is stopped, the irq is no more
relevant ; clear any irq but do not process it.
Fix Typo on comments and add LOG_DBG on channel increment.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Removed auto select from LWM2M_DTLS_SUPPORT
* TLS_CREDENTIALS
* NET_SOCKETS_SOCKOPT_TLS
* NET_SOCKETS_ENABLE_DTLS
LwM2M stack shouldn't enforce these options as they
are not needed with socket offloading.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
This sample should be executed only when connecting external
hardware (Led strip). Thus it is necessary to add fixture to avoid
execution when no hardware is connected.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
The SSD16xx uses a separate pin to indicate if an SPI transfer is a
command or data. This means that driver needs to split most SPI
transactions into two distinct transactions, one for commands and one
for data. The driver currently doesn't request SPI_HOLD_ON_CS which
means that the chip select will be released momentarily between the
command and data phase.
Update the driver to request SPI_HOLD_ON_CS and SPI_LOCK_ON to lock
the bus and complete both phases of a command in one atomic operation.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
We are working on phasing out use of the devicetree 'label'
property. We can use DEVICE_DT_GET and drop use of DT_LABEL.
Signed-off-by: Kumar Gala <galak@kernel.org>
This sample can only be tested if the DUT has external memory
connected. This commit aligns the yaml description, so the test
is not picked up on setups without required fixture.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
spi_context_cs_configure_all() is currently called from
spi_bitbang_transceive(). This causes a glitch when combined with
SPI_HOLD_ON_CS is used.
Move the initialization to spi_bitbang_init which is what the other
SPI drivers seem to do.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
The SPI bitbang driver doesn't correctly initialize the list of CS
GPIOs. As a consequence, SPI buses using the bitbang driver won't
drive CS low. Add the missing initialization.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
Move to use DEVICE_DT_GET instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Get the vref-mv through the ADC API instead of the device tree. This
saves 8 bytes of SRAM and will be future proof in case, one day, support
for a variable vref is added.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The value is unused in this structure is unused and can be accessed
through the adc_ref_internal() function.
This saves 4 bytes of SRAM.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Allow the battery voltage to be read through the ADC even if the
CONFIG_STM32_VBAT driver is not enabled.
I guessed this part of code is conditionally compiled depending on
CONFIG_STM32_VBAT because this feature, and hence the
LL_ADC_CHANNEL_VBAT constant is not available on all families. As the
feature is already checked at runtime (as the same driver supports
multiple instances), we can conditionally compile it depending on
LL_ADC_CHANNEL_VBAT instead.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Added sequence number and timestamp to the bt_audio_stream_send
function. This allows an application to better
control the audio transmission, as it can schedule
one or more audio streams to send a buffer in a specific
SDU interval (ensuring that e.g. left and right is sent in
the same SDU interval).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This patch fixes an issues where the TX virtqueue is misaligned by
2 bytes due to the way the virtqueue start address is calculated.
It is currently set to immediatelly follow the RX virtqueue:
vr->tx_addr = vr->rx_addr + vring_size(num_desc, VRING_ALIGNMENT);
but the RX virtqueue does not end on an aligned boundary (last field,
avail_event is uint16_t). The resulting misaligned virtqueue causes
alignment faults on architectures that do not support unaligned
accesses (and is suboptimal otherwise)
The fix is to realign tx_addr to requested VRING_ALIGNMENT.
Signed-off-by: Aleksandar Radovanovic <aleksandar.radovanovic@amd.com>
The Seeed XIAO BLE is a tiny (21 mm x 17.5 mm) Nordic Semiconductor
nRF52840 ARM Cortex-M4F development board with onboard LEDs, USB port,
QSPI flash, battery charger, and range of I/O broken out into 14 pins.
Co-authored-by: Peter Johanson <peter@peterjohanson.com>
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
The Raspberry Pi Pico watchdog is now supported, this adds a note to
the release notes with this information.
Signed-off-by: Jamie McCrae <spam@helper3000.net>
