The unicast client used the BT_DATA_UUID16_SOME and
BT_DATA_UUID16_ALL instead BT_DATA_SVC_DATA16 for
discovering ASCS servers.
BT_DATA_SVC_DATA16 is the right one to use, as that
is mandatory for a server to advertise, and the UUID
ones are only recommended. Furthermore, the service data
of the ASCS server can now also be retrieved.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add automatic adding of the CAP Acceptor Set Member AD data.
This also moves the CAP Acceptor service data into the
cap_acceptor.c shell implementation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Microchip XEC ADC and ADC V2 driver were merged into one
That PR did not change the ADC API test and ADC shell resulting
in twister build failures. Fixed both ADC API test and ADC shell.
Signed-off-by: scott worley <scott.worley@microchip.com>
Add an input device to take input key events as an input and generates
short press or long press devices as output.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Remove overlay added by mistake. SMBus EEPROM PR is not merged and the
dts would be updated for qemu_x86_64 board's dts.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Devicetree local-mac-address and zephyr,random-mac-address support added.
Updated w5500_set_config() to support ETHERNET_CONFIG_TYPE_MAC_ADDRESS
and change the MAC address at runtime.
Signed-off-by: Rainer Paat <rapaat@gmail.com>
Fix ticker to explicitly trigger worker when ticks_to_expire
is less than or equal to elapsed time.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
I am no longer able to act as GPIO subsystem maintainer. I would like
to degrade my role to collaborator.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Update ticker implementation to reschedule unreserved ticker
that use ticks_slot_window.
This will avoid unreserved ticker from continuously
overlapping with reserved tickers. And the change is
required to reduce processing overheads before reserve
ticker timeout callback executes.
Unreserved tickers with ticks_slot_window will always yield
to any colliding reserved or unreserved tickers.
The implementation moves unreserved tickers (no ticks_slot
value, in this case continuous scan window) to end of a
colliding reserved/unreserved ticker so that reserved
tickers (like central role) do not have high overheads due
to unreserved ticker's prepare (scanner) be preempted
everytime before reserved ticker's prepare (central).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The number of available EasyDMA MAXCNT bits is now defined per-instance
in Devicetree.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
A bit of cleanup in the public header files inclusion policy and
statements:
- Include only what is needed if possible
- Include in the right location
- Include in the right order
Fixes#55971.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The WAIT_FOR macro uses the 'k_us_to_cyc_ceil32' function declared
in zephyr/sys/time_units.h. It should have been included.
Fixes#56006
Signed-off-by: Yuval Peress <peress@google.com>
The commit adds CONFIG_MCUBOOT_CMAKE_WEST_SIGN_PARAMS Kconfig
option to allow passing arguments to west sign.
The option is used to pass arguments that immediately follow
west sign in cmake invocations and replaces hardcoded
"--quiet" parameter, but defaults to the "--quiet" value to
keep current behaviour.
New Kconfig option allows to pass arguments to west sign
without modifying cmake/mcuboot.cmake.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The variable need_recover_spinlock is always set to false so
the spinlock recovery code is effectively no-op. So remove
everything related to the variable.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add support for the following boards:
- esp32s2_saola
- esp32c3_devkitm
- esp32s3_devkitm
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
temporary_table is a trivial copy of virtual_memory_regions, it isn't
clear why it's needed. All the more that it's freely mixed with
virtual_memory_regions itself. Also change a variable name to avoid
confusion and improve indentation.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
update espi_vwire_signal enum to refer all platform specific
usage virtual wires to ESPI_VWIRE_SIGNAL_SLV_GPIO_x
Virtual wires used for USB-C port over current (OCB)
have been defined as macros mapped to the corresponding
espi_vwire_signal enum
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Change device tree VW routing to a form allowing overrides.
Add two new DT optional properties for specifying the reset
source and reset value of each virtual wire. Only virtual
wires that are enabled using the status property are modified.
NOTE: eSPI virtual wires are controlled in groups of 4 by
hardware. The optional reset signal source properties applies
to all four virtual wires in the group. If this field is
changed from the hardware default, it should be changed for
only one virtual wire in the group. If the property exists
in more than one wire in the group it must be set to the
same value.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Modify Mircrochip MEC172x eSPI driver to get eSPI virtual wire
hardware routing from device tree.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
The clock control driver requires three pieces of information:
PCR register index, bit position, and clock domain. Clock domain
was missing from DT information and MCHP macros.
Signed-off-by: Manimaran A <manimaran.a@microchip.com>
Deleted adc_mchp_xec.c and microchip,xec-adc.yaml file.
DTSI, yaml, CMakeLists.txt and Kconfig.xec files are
updated for compatible.
Signed-off-by: Manimaran A <manimaran.a@microchip.com>
Updated the "adc_mchp_xec_v2.c" adc driver to support both MEC172x and
MEC15xx SOC.
ADC smapling clock configuration updated using DTS.
Signed-off-by: Manimaran A <manimaran.a@microchip.com>
Revert the locally fixed issues for the zephyr 3.3.0 release and
replace them with the official fixes submitted upstream.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add check to the Remote Provisioning Client model init call
that verifies that the model is located at the root element.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Change the documentation @defgroup tag for RPR client,
as it does not align with other parts of the RPR implementation.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Start using zephyr power management in cavs platform in a similar way
that is already done in ace. This commit only addresses the power off/on
sequence. Runtime power management is not implemented.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Fixes the lsm9ds0_gyro sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the lsm6dso sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the lsm6dsl sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the lps22hh sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the lis3mdl sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the lis2mdl sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the lis2dw12 sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the lis2ds12 sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Fixes the lis2dh sensor driver to store the user-supplied sensor
trigger as a pointer rather than a copy. This enables the trigger
handler to use CONTAINER_OF to retrieve a context pointer when the
trigger is embedded in a larger struct.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
