Remove redefinition of adc0 node in native_posix overlay
since it's now present in the board dts.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Rename adc node to not collide with the default adc
node now present in the native posix dts.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Remove includes of adc dt-bindings header since these are
now already included in the root .dtsi file that adds an
adc node.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Remove include of adc dt-bindings header since these are
already included in the root .dtsi file that adds an adc.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
Add adc-emul node to make it possible to remove include
of adc dt-binding header in some tests.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
The spi-sam0 driver does not initialize DMA parameters when the MCLK
peripheral is defined in the microcontroller header file. Fix it by
copying the initialization code from the non-MCLK case.
Signed-off-by: Brandon Del Bel <delbel@umn.edu>
This adds some structs for interrupt stack frames to make it
easier to access individual elements, and ultimately getting
rid of magic array element numbers in the code. Hopefully,
this would aid in debugging where you can view the whole
struct in debugger.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
- Add initial version of Infineon CAT1 i2c driver.
- Add initial version of binding file for Infineon
CAT1 I2C driver
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Errata sheet of the stm32U5 (ES0499) recommends to avoid clearing
the DMAT bit with LL_USART_DisableDMAReq_TX to re-start
a DMA transfer on the UART Tx block. The function becomes empty.
This is also seen for stm32H5.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add verbose output of scan data to output all received data types as
hex values. This is turned off by default and can be toggled using
the bt scan-verbose-output <on|off> command.
Signed-off-by: Martin Rieva <mrrv@demant.com>
This adds the SPI driver for the Renesas SmartBond(tm) DA1469x MCU family.
The driver only supports controller mode. All four SPI modes are supported.
Note that the lowest supported speed is 2285714Hz.
Requesting speeds higher than 16MHz, will result in a 16MHz SCLK.
Co-authored-by: Stan Geitel <stan@geitel.nl>
Signed-off-by: Ben Lauret <ben.lauret.wm@renesas.com>
With -ffreestanding disabled, Zephyr SDK 0.15.0 generates a potentially
uninitialized variable warning that appears to be a false positive. Pull
in the upstream version of the module which contains the fix.
Signed-off-by: Keith Packard <keithp@keithp.com>
The out_of_tree_driver sample defines syscall functions, and
thus requiring CONFIG_APPLICATION_DEFINED_SYSCALL to be enabled
even if no userspace is involved. This is due to the function
generation for the syscall stubs.
Fixes#56946
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add a generic section that covers changes to the main manifest,
requiring those to have TSC approval.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since tools that are not software that is compiled into the final images
may have very different requirements from regular external components,
introduce a new section outlining the process and rules to introduce new
tools into the project.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since this has been a source of confusion for a while now, add a small
section to clarify the difference between modules and west projects.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit simplifies the arguments for sending dns responses
and fixes an issue where both the ipv4 and ipv6 member of a header
union were accessed.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Duplicate logging prints make it hard to find the origin.
This commit does a cleanup of the debug messages printed.
Also change the level of an invalid record to debug as this
is out of our control.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
For offloaded iface net_tcp_get is never called, so context->tcp
is always NULL. In that case net_tcp_tx_sem_get will return wrong pointer.
For pollout k_poll will be called with NULL semph,
which cause HardFault.
Signed-off-by: Wojciech Slenska <wsl@trackunit.com>
OpenThread requires that the `mTimestamp` parameter from the `mRxInfo`
struct points to the end of SFD, i.e. beggining of PHR.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
The initshell sections in the linker scripts where associated with theo
old shell code. The old shell code has been removed for some time so
remove references to initshell in the linker scripts and size_calc.py
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Move the devicetree bindings for Analog-to-Digital Converters (ADCs)
from dts/bindings/iio/adc to dts/bindings/adc as Zephyr does not have
an IIO layer.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
After `otPlatRadioSleep` was fixed to properly set radio state to sleep,
radios supporting `IEEE802154_HW_SLEEP_TO_TX` capability would not be
able to handle `PENDING_EVENT_TX_DONE` while in sleep state.
This commit fixes such case.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
The delayblock is bypassed when the <dlyb-bypass> property is true.
DT_NODE_HAS_PROP tests whether the property is defined at all,
not whether a boolean property is true or false.
To get a boolean property’s truth value,
use DT_PROP(node_id, prop) instead.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
- Reduce "extra" added latency when trying to enter light
sleep from 500ms to 50us, since light sleep states
(e.g. "WFI idle") usually have microsecond-range residency
times.
- Keep "extra" latency when entering deep sleep the same at
1100ms (as we're trying to enter the deepest sleep state
available, it doesn't hurt).
- Replace k_uptime_delta() with manual subtraction since
k_uptime_delta() updates starting timestamp which leads to
incorrect timing measurement when k_uptime_delta() is
called for the second time.
- Measuring PM sleep entry latency using pm_notifier entry
callback, do it only for the first PM entry event after
calling k_usleep(), as during the sleep PM entry & exit
may happen multiple times and that is normal.
Signed-off-by: Roman Dobrodii <rdobrodii@antmicro.com>
Introduce config for all ESP32 chips which
may be using different architectures but
shares common peripherals and features.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Change the default value of past_preference to true, to prefer
PAST by default when using the scan delegator.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When copying the stream specific codec configuration data,
the value pointer in the bt_data struct was not properly
updated, causing possible invalid data access.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit adds a missing `__weak` symbol to the `pm_policy_next_state`
function.
This is needed for e.g. `tests/kernel/profiling/profiling_api` to build
correctly.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
