903a79431a
seems to have attempted to limit in how
many platforms this test runs due to issues in some
platforms. But how it was done (using platform allow apart
from integration platform) it prevents it running on
other platforms in which it works.
Add the nrf52_bsim target to this allow list so the
test can be run on it too.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Mesh1d1 uses EHP wth SHA256 algorithm as the main one.
This mandates to use 32 bytes static oob if static oob
has been chosen.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Provisioner should be able to manage received capabilities
unconditionally. Mandatory oob authentication is the node
feature and it is still compile time feature.
Split handling of this feature on provisioner and node part.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
According to specification it is possible to provide
static oob value with any length. Mesh should trim or
append\prepend by zeroes if it is longer\shorter than
required value.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Add BT_CTLR_EVENT_OVERHEAD_RESERVE_MAX Kconfig to allow the
omit of EVENT_OVERHEAD_START_US and EVENT_OVERHEAD_END_US in
the time reservation calculations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This change from using the mechanic of CONFIG_BT_KEYS_OVERWRITE_OLDEST
to instead handle the bonding cache through bond_deleted.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Added retry mechanic to CSIP notifications by adding them into system
workqueue. Bookkeeping is done for notifications for all clients, and
potentially disconncted clients will also receive notifications on
reconnect. This also adds mechanic to restore the local clients list
upon registration of the service, as well as BSIMs to test notify on
reconnect.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Reformated csip_set_member to use atomic flags for notifications
instead of a pending notification array. This better conforms the
style of the code to how its done in other LE Audio services.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Previously each piece of LwM2M SEND was
using token length of zero. I think this was unintentional.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
To protect the integrity of outgoing block-wise transfers, append
Etag option that allows client to see if the received block is
generated from same content as it is expecting.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Allow blockwise-send buffers to be used with GET and FETCH
queries as well.
When outgoing packet is split into multiple blocks, don't free
it when first block is send. Keep it in memory until some other requests
come.
Following queries to next block are matched using CoAP token.
However, this required Leshan to use COAP.BLOCKWISE_REUSE_TOKEN=true
option from Californium.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
lwm2m_udp_receive() is only called with same function
pointer, so there no need to carry that in the parameter.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
In reality, single-write is the only operation that handles
BLOCK1 operations when receiving paylod.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Partial content format support is required to have a proper support
for content format OPAQUE instead of threading it as a part of
plain text format.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Added application based on SMP Server Sample. Application is built together
with MCUboot using sysbuild and is flashed onto device in one step.
Tests are automated with pytest - new harness of Twister.
The image for upgrade is prepared using west sign command
then is uploaded by mcumgr into device and tested.
Automated scenarios to test upgrade (image upload, test, revert, confirm),
to test downgrade prevention mechanism and to test upgrade with image,
that is signed with an invalid key.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Add support for setting reviewers as well for module PRs, in addition to
the assignees.
Note that this still only works on repositories with an assignee on
record since it does not seem to be possible to query for PRs that have
no reviewers.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
These worked because edtlib allows 'pinctrl-.*' properties without
specifying them on the bindings. However, this has never been an
anounced pinctrl feature, the reference documents explicitly mention
that usage of pinctrl-device.yaml is mandatory.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add 'hwinfo' to supported features list in CC1352* and CC26x2* based
boards yaml and documentation files. Driver for this platform was
included in 634416bc49.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Based on review of the similar charger driver API, it's been demonstrated
from the community that embedding a per value property type when fetching
properties. Separating off the property types from the property values
themselves also allow an array of property types to declared as static
const.
Break up fuel_gauge_property struct into a fuel_gauge_prop_val union and a
fuel_gauge_prop_t property type as inputs into fuel gauge API functions.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Based on review of the similar charger driver API, it's been demonstrated
from the community that embedding a per value status code when fetching
multiple properties isn't particularly wanted or needed. It was largely
considered not worth the additional maintenance to have the extra per
property error information.
Remove the status field from the fuel_gauge property value structs.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
The fuel_gauge_set_prop() function prototype declares a function that sets
multiple fuel gauge properties at once. The naming suggests it ought to
fetch a singular property at a time. Moreso, some clients may just want to
set properties one at a time and may feel uncomfortable using a prototype
for fetching multiple properties when wanting to fetch them one at a time.
Modify fuel_gauge_set_prop() to fetch a single property and add
fuel_gauge_set_props() to support fetching multiple properties. Modify
existing tests/drivers/samples.
This is part of #61818 work.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
The fuel_gauge_get_prop() function prototype declares a function that
retrieves multiple fuel gauge properties at once. The naming suggests it
ought to fetch a singular property at a time. Moreso, some clients may just
want to fetch properties one at a time and may feel uncomfortable using a
prototype for fetching multiple properties when wanting to fetch them one
at a time.
Modify fuel_gauge_get_prop() to fetch a single property and add
fuel_gauge_get_props() to support fetching multiple properties. Modify
existing tests/drivers/samples.
This is part of #61818 work.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
After esp32 board was split into several different models,
rpmsg sample code was missing the change. Make esp32_devkitc_wrover
the default option.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Adds into esp32s3_devkitm the appcpu board to allow
building applications running in ESP32S3 2nd core (appcpu).
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Revise property's name & cells' name for further
devicetree reset macro used.
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Update Zephyr fork of MCUboot to revision:
6c8c76fc37f10d7f3ce44474dc2a450f61ff46e0
Brings following Zephyr relevant fixes:
- 4da51013 zephyr: Add shared data support
- 9bef51ce bootutil/crypto: Do not include import key with PSA
- db2024eb espressif: update secure boot and flash encryption
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Update the text so it points to useful parts of the documentation
regarding CI and contribution guidelines.
Also invite users to join Discord to ask for help.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The CONFIG_MCUBOOT_BOOTLOADER_MODE_DIRECT_XIP has been missing
select of CONFIG_MCUBOOT_BOOTLOADER_MODE_HAS_NO_DOWNGRADE.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Changes the Kconfig symbols for the sys_heap based memory management option
and removes the notion of `BLOCKS` with a more concise single
`LV_Z_MEM_POOL_SIZE` option. Also adds `LV_MEM_CUSTOM` to the lv_conf.h,
since in any option the memory management is considered to be custom.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Update the TLS part of the big_http_download sample to reference the
currently used server used for file download.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The download server that the origin server redirects to seems now to
use different certificate (signed by a different root CA). Therefore
add the additional root CA to the certificate list and refactor the
sample code a bit to allow to easily extend/replace certificates in the
future.
Bump the mbed TLS heap size a bit to accommodate the extra registered
certificate.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When radio is set to promiscuous mode it is desirable to receive
invalid frames. This skip a few checks and allow an invalid and
non-standard frames be delivered for diagnose.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Back-to-back Tx Rx implementation was incorrect for nRF53
that uses DPPI. Both current and next DPPI channels where
enabled in the implementation which only worked correctly
to have the right tIFS when current and next PDU length
were same.
Fix ensures that the correct current DPPI is subscribed
to by the radio subscribe.
The implementation has been refactor to be able to use the
current sw_tifs_toggle value in the HAL implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
