DSP AGU/XY extensions ARC EM processors are supported now in
Zephyr.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Add a new BabbleSim test checking that the value of the Bluetooth
identity stored in the settings is correct.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Fix an issue causing a wrong Bluetooth identity value to be stored. It
was happening because the `bt_dev.id_count` was incremented after the
settings being stored.
To fix this, `bt_dev.id_count` is now incremented right before the ID
creation and is decremented if the ID creation failed.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The prompt is referring to another existing driver(NXP S32),
now the correct name is displayed.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
If CONFIG_MCUX_DCNANO_LCDIF_EXTERNAL_FB_MEM is not set and
CONFIG_MCUX_DCNANO_LCDIF_FB_NUM is zero, a division by zero occurs.
Use the same framebuffer size definition as in the external-framebuffer
case to resolve this.
Fixes#58908.
Signed-off-by: Aedan Cullen <aedan@aedancullen.com>
It doesn't make sense to select this option at SoC level. This feature
is meant for subsystems/modules that need device handles to be
modifiable at runtime.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
call k_thread_foreach_unlocked to avoid assertions caused
by calling shell_print while holding a global lock
Signed-off-by: Maxim Adelman <imax@meta.com>
This looks a bit lost in its own USB-C chapter,
move it to USB under the Power Delivery heading.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Mostly moved and reorganised content to the Connectivity chapter,
separated API references. Fill in some gaps in the USB device
documentation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Fixes an issue with relative paths both with and without using
sysbuild where they would not be updated properly or a warning
would previously be emitted.
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This extra MPU alignment of RAMABLE_REGION is only required
if we put ROMABLE_REGION and RAMABLE_REGION into the same
(continuous) memory (i.e. SRAM) - so we won't get beginning of the
RAMABLE_REGION in the end of ROMABLE_REGION MPU aperture.
If we use different regions (ICCM & DCCM, FLASH & SRAM, etc...)
we don't need this extra MPU alignment.
Let's drop it to decrease ROM memory usage.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Add release notes for SDHC and Disk drivers, highlighting addition
of NVME support in the disk driver layer as well as CPOL/CPHA clock
modes within the SDHC SPI driver.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
As now we point to babblesim with the zephyr manifest,
we can tell users to get it that way.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
When CONFIG_HAS_DYNAMIC_DEVICE_HANDLES is selected, devices handles are
placed in RAM region so that they can be modified at runtime. However,
the gen_handles.py script added the `const` attribute to the device
handle arrays regardless of this setting, leading to faults when running
the application. This may be an indicator that this feature is not
actively used.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This variable is only needed when gen_handles.py is called, so define it
under the if() above.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fixes the documentation to show image and slot number for get
state of image response being unsigned, not signed.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
running samples/net/cloud/mqtt_azure in QEMU with default
configuration crashes with exception. This PR change doubles
the default workqueue stack size in a attempt to fix the issue
reported in: GH#58930.
Signed-off-by: Andrei Hutanu <andrei.hutanu.i@gmail.com>
drivers: serial: uart_sam0: fix uart_sam0_irq_update TXC reset bug
uart_sam0_irq_update function resets flags that will cause int. re-entry
existing implementation also clears the TXC flag if it is set
this breaks transmit complete detection
Per the SAMD5x/E5x Datasheet Sect. 34.8.6, writing '1' to the TXC will
clear the flag and disable TX complete interrupts, this should be
preserved through the irq_update for use in the tx_complete check function
The proper fix will cache the TXC value before conditionally clearing the
flag based on that cached value. If you do not condition this on the
cached value a race condition will periodically occur where
the TXC is cleared but never cached.
Fixes zephyrproject-rtos#55386
Signed-off-by: Peter McGaughey <peter.mcgaughey@daikincomfort.com>
The crypto hash context has a reference to the crypto device,
but the assignment was duplicated.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Increase RAM requirements for some test, we have many exotic platforms
failing to link due to the size of the test.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
