The sample from samples/drivers/misc/ft800/ causes twister to
timeout as it has no pass conditions defiend nor producess any
output that can be verified. What is more, it requires a shield
which is not reflected in the sample.yaml. This fix sets test harness
to display and adds an entry for the required fixture.
Fixes: #38536
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Add #defines for the maximum and minimum allowed values for object
IDs.
Moves the #define for the directory listing object ID to the public
header file
Having these limits available is useful for applications wanting to
ensure they pass in (or handle) valid object ID values.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Object IDs are 48 bits, but are often carried in uint64_t variables.
This commit defines a mask value that retains the least significant 48
bits.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
This commit adds FMAC HAL and LL drivers to the Kconfig system
Required to enable Filter Math Accelerator (FMAC)
on STM32G4/H7 devices
Signed-off-by: Tom Owen <tom.owen@zepler.net>
Zephyr SDK now features an openocd version compatible
with stm32g0 targets.
Set openocd as the default zephyr runner for this target.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Zephyr SDK now features an openocd version compatible
with stm32g4 targets.
Set openocd as the default zephyr runner for this target.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
For ECFC L2CAP test we user overlay with disabled EATT and
bt_eatt_disconnect_one() is available only with EATT enabled.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
For some unknown reasons, using the new modified HPET timer would
render shell unresponsive under QEMU. So for now, disable QEMU
icount when shell is enabled.
Fixes#37672
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The Bluetooth Core Specification, version 5.3, has introduced multiple
changes to several widely-used terms in order to make them inclusive.
Update the public API to reflect this, excluding hci.h, which will be
done in a subsequent commit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
commit id ec2b9d42af missed that ivshmem
uses pcie_msi_enable as well, thus fixing it now.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Update the NXP HAL to bring in fix for the FlexCAN driver on the NXP
Kinetis MKE1xF.
Fixes: #38442
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Implements the Bluetooth appropriate language mapping for the Bluetooth
mesh subsystem.
Changes the following terms:
- Master security credentials -> Flooding security credentials
- Whitelist filter -> Accept filter
- Blacklist filter -> Reject filter
- Removes CDB's NODE_BLACKLISTED, which was not in use.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add a warning if the image is unconfirmed. Add a delay before rebooting
so that the user knows what happened.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The current HAWKBIT_PROBE & HAWKBIT_PROBE_DEPLOYMENT_BASE response
handlers aren't able to handle multipacket response from Hawkbit
server. This commit fixes it by using the implementation from
HAWKBIT_DOWNLOAD.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Signed-off-by: Joep Buruma <burumaj50@gmail.com>
Twister was failing for samples/drivers/audio/dmic with timeout
because there were no pass conditions defined. This patch sets
harness to console and adds regex entries to be checked.
Fixes: #38532
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Call __reset instead of directly calling __initialize from the common
RISC-V privileged SoC vectors __start. This allows injection of SoC
specific reset code just after setting up the machine trap vector.
RISC-V privilege SoCs without the need for custom reset code can set
CONFIG_INCLUDE_RESET_VECTOR=y to include a __reset stub which simply
calls __initialize.
Fixes: #38396
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
net_packet_socket_input() was changed to hardcode the return of
NET_CONTINUE and that caused a segmentation fault/crash in
net_core/process_data(), in cases when pkt was unreferred and
NET_OK was returned from net_conn_input()
This happened with socket combo of: AF_PACKET+SOCK_RAW+IPPROTO_RAW.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
CONFIG_PM_DEVICE was a de-facto requirement when enabling CONFIG_PM=y
since some device, i.e. UART, used the PM device hooks to block
suspension process while the device was busy finishing transmission.
This has now been fixed using constraints, so CONFIG_PM=y can be enabled
without further requirements.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Extracted new Kconfig file for the Extended Advertising
and for the Bluetooth Isochronous Channel from the
Bluetooth subsystem Kconfig.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
The BAS serivce Kconfig uses now a log template instead of
defining logger configuration itself.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
The nbr_lock var actually depends on CONFIG_NET_IPV6_NBR_CACHE
(not CONFIG_NET_IPV6_ND), so move its initialization call.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
If one of AUX_CHAIN_IND is not received properly we need to send an
extra report over HCI to indicate that data are incomplete.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
According to reference manual, use of TC is "to avoid corrupting the
last transmission when the USART is disabled or enters Halt mode.". It
is safe to remove it since it is not checked when CONFIG_PM=n.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In the current implementation the STM32 UART driver required to enable
`CONFIG_PM_DEVICE` when `CONFIG_PM=y` to function properly. The main
reason is that in some situations, like in polling mode, transmissions
are not fully synchronous. That is, a byte is pushed to the _queue_ if
it is empty and then the function returns without waiting for it to be
transmitted to the wire. This makes sense to make things like per-byte
transmission efficient. However, this introduces a problem: the system
may reach idle state, and so enter low power modes before the UART has
actually finished the last data in the queue. If this happens,
communications can be interrupted or garbage data may be put into the
UART line.
The proposed solution in this patch uses PM constraints to solve this
problem. For the IRQ/DMA case it is easy since we can set the constraint
before transmission start, and when the completion (TC) interrupt is
received we can clear it. However, the polling mode did not have the
capability to signal the completion. For this case, a simpler IRQ
routine is provided to just release the constraint. As a result, the PM
hooks are not required and so system can operate with just `CONFIG_PM`.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
BT_SECURITY_LOW and etc. were previously renamed and are no longer
valid.
The original rename is in the following commits:
1c48757d94 (New names, deprecate old)
5f2a9ba8e4 (Remove deprecated names)
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemiconductor.no>
Since commit 718c77a4cd ("dts: arm: stm32f0 soc serie has dma of type
V2bis"), the DMA DT cell of STM32F0 MCU has been fixed. It now has three
elements instead of five previously.
This patch fixes the dma property used in nucleo_f070rb.overlay
accordingly.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Moves the Ethernet PHY reset routine on mimxrt1xxx_evk boards to execute
in the POST_KERNEL initialization level rather than the PRE_KERNEL_2
level because it relies on a kernel service, k_busy_wait(). Leverages
the existing CONFIG_PHY_INIT_PRIORITY to allow users to configure when
within the POST_KERNEL level this routine occurs, which by default is
set correctly to the following order:
Init Function Init Level Priority
--------------------------------------------------------------------------------------
sys_clock_driver_init PRE_KERNEL_2 CONFIG_SYSTEM_CLOCK_INIT_PRIORITY=0
mcux_igpio_##n##_init POST_KERNEL CONFIG_KERNEL_INIT_PRIORITY_DEFAULT=40
mimxrt1064_evk_phy_reset POST_KERNEL CONFIG_PHY_INIT_PRIORITY=70
eth_init POST_KERNEL CONFIG_ETH_INIT_PRIORITY=80
net_init POST_KERNEL CONFIG_NET_INIT_PRIO=90
This fixes an issue that was introduced in commit
f0b3146ff5, which caused the system timer
to be initialized after the Ethernet PHY reset. As a result, the
k_busy_wait() never returned and the kernel never finished booting. The
serial driver never initialized and there was no output on the console,
not even a boot banner.
Tested on the mimxrt1064_evk board with samples/net/dhcpv4_client.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Do not set DLAB bit in Line Control Register when the access to
the baud rate divisor registers is not needed.
Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com>
TI Hal has its own constraint API that is used by its drivers. These
constraints need to be correlated with Zephyr constraints to be
constraints set in the HAL be visible on Zephyr and vice-versa.
Fixes#38362
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Implement constraint API as weak symbols so applications or platform
can override them. Constraints are a high-level abstraction to inhibit
the power subsystem of using certain power states. Some platforms can
have their own way to set/release constraints in their drivers that
are not part of Zephyr's code base.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
