Updated implementation to have consistent initialization of
ret_cb use when passing it to ticker function calls.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Test include non-aligned read in nrf_qspi_nor flash and
SoC flash memory to buffer with variable size.
It checks all possible variants of alignment and size.
Signed-off-by: Mateusz Syc <Mateusz.Syc@nordicsemi.no>
Added function read_non_aligned that reads data under
non-aligned flash addres to non-aligned read buffer of any size.
Signed-off-by: Mateusz Syc <Mateusz.Syc@nordicsemi.no>
Remove cmd_ull_reset command, as this would put the host out
of sync. Also, this command is seldom used/required.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added a feature that allows an application to request
automatic discovery of the CCCD handle when subscriping
to a characteristic. In order to preserver RAM, the application
is expected to provide the discovery parameters, and it's up
to the application whether or not it wants to reuse the
discovery parameters or use one for each characteristic.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Add a sample to demonstrate and test the Wurth Elektronik WSEN-ITDS
accel sensor. Sample code covers accel and die temperature functions.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Add support for wsen-itds 3-axis accel sensor, provides acceleration,
temperature data reading and supports configuring of output data rate,
operating mode and scale.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Single work object for whole fsm was not being able to handle more than
single packet at a time. Because of that we have overwritten already
scheduled packets, resulting in fsm timeout and net_pkt leak.
Use net_pkt work object instead, so we can safely schedule more than a
single packet.
This commit also drops workaround for qemu_x86 unit testing.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
It's not safe to assume that the data section is 8-byte aligned.
Assuming 4-byte alignment seems to work however, and results in
simpler code than arbitrary alignment support.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There is following error when compiling applications using smp:
/zephyr/include/mgmt/smp.h:77:16: error: field 'zst_work' has \
incomplete type
77 | struct k_work zst_work;
| ^~~~~~~~
/zephyr/include/mgmt/smp.h:80:16: error: field 'zst_fifo' has \
incomplete type
80 | struct k_fifo zst_fifo;
| ^~~~~~~~
Fix that by adding missing kernel.h include statement in mgmt/smp.h.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The hardware stack overflow feature requires
CONFIG_THREAD_STACK_INFO enabled in order to distingush
stack overflows from other causes when we get an exception.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
--warnings-as-errors was basically doing nothing, it is the default.
Replace this with an option to disable erroring on warning:
-W, --disable-warnings-as-errors
Fixes#26910
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Conditional API was removed by preprocessor which violates zephyr
coding style. Removed ifdefs around conditional API.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add devicetree overlay for connecting an Mikroe ETH click shield to an
NXP LPCXpresso55S69 development board.
The LPCXpresso55S69 uses SSEL1 (CS1) for mikroBUS SPI, whereas the
generic Mikroe ETH click board definition assumes SPI CS0.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Replaces .conf type configuration with .defconfig.
Makes configuration conditional, it depends on shield definition and
networking.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Transfers are cancelled on suspend event, OUT transfers
needs to be re-trigger on resume.
Rework event handling to filter out spurious resume
events and re-trigger transfer if previous event was
a suspend event.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The parameters for this fuel gauge depend on the hardware design and
the expected battery. These should not be defaulted to a value that
may be inappropriate. Require that they be explicitly provided.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add a note in 2.4 release notes regarding SW_VECTOR_RELAY
feature, now supported also in Mainline Cortex-M architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
By splitting it out to a separate file, it will become easier to
separate generic and non-generic controller features.
This commit only contains the simple extraction.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
The current shield version shows different configuration, including
disabling default ethernet and wifi interfaces. To allow easy
connection from standard headers, this add two new shield designations.
The existing boards overlays and defconfig were updated.
The documentation was update to reflect changes. A new supported
variations section helps to understand what shield variation user need
select to build their own system.
This changes requires changes on esp32 offload tests to reflect new
esp_8266 shield designations. Sam4e_xpro was keeped as the only one
with dedicated overlay and both frdm_k64f and disco_l475_iot1 were
moved to use standard arduino r3 header using extra args.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The esp_8266 shield was added without owner on #24710. Add myself as
an owner of esp_8266 shield files.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Exercise the public macros as well as device_map().
This test has a whitelist for whatever reason; add
mps2_an385 so that the !DEVICE_MMIO_IS_IN_RAM stuff
is tested.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This gets a little complicated as the driver could be
using PCI-E MMIO, MMIO specified by DTS, or I/O ports.
This driver doesn't use struct uart_device_config any
more.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Good example of the NAMED variants of the MMIO macros, since
an existing inheritance mechanism already took the first-member
slot of the dev_data/config structs.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fairly straightforward example of how to deal with PCIe.
The code considers whether a particular instance is PCIe
or not on a per-instance basis, so DEVICE_MMIO_ROM is not
conditionally defined.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A hack was required for the loapic code due to the address
range not being in DTS. A bug was filed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The ethernet driver no longer continues to try to initialize
itself if PCIe probing fails.
This device is always PCIe so we don't need to reserve ROM MMIO
storage.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This driver code uses PCIe and doesn't use Zephyr's
device model, so we can't use the nice DEVICE_MMIO macros.
Set stuff up manually instead using device_map().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Three variants provided:
- Drivers with one MMIO region to manage
- Drivers with multiple MMIO regions to manage
- Drivers or driver-like code which doesn't use Zephyr's device
model
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This currently only supports identity paging; there's just
enough here for device_map() calls to work.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This will be the interface for mapping memory in the kernel's
part of the address space, which is guaranteed to be persistent
regardless of what thread is scheduled.
Further code for specifically managing virtual memory will end up in
kernel/mmu.c.
Further defintions for memory management in general will end up
in sys/mem_manage.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
