Changes name of folder from tensorflow to tflite-micro and updates docs
to reference TensorFlow Lite Micro specifically instead of TensorFlow.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Updates west manifest and module folder name to point to new
TensorFlow Lite Micro repo Google recently pulled out of
the TensorFlow repo.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Suppress violation, because it is a deliberated deviation.
Noticed, that my previous PR #36420 comments were not correctly
detected by a static analysis tool. Only the first one item
"MISRAC2012-RULE_20_4-a" was detected and suppressed.
Change comment style, so each item will be suppressed.
Comment style defined in PR #36911 as the most suitable
for the analysis tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Currently the default runner of nsim_hs_smp is mdb,
the runner of other nsim platform is nsimdrv, user
can't change the default runner unless he uses
west command(--runner).
With this change cmake will choose runner according
to BOARD_DEBUG_RUNNER or BOARD_FLASH_RUNNER. so if
add -DBOARD_FLASH_RUNNER=mdb-nsim or
-DBOARD_DEBUG_RUNNER=mdb-nsim to cmake command,
the apllication will be run with mdb.
Signed-off-by: Jingru Wang <jingru@synopsys.com>
Following change of HSE clock binding, remove hse-bypass
which is no longer an option and replace it with hse-tcxo
which is the configuration closest to previous status.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
On STM32WL, HSE clock can take 2 specific options:
-hse-tcxo
-hse-div2
Enable support for these options.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
STM32WL features a specific HSE clock with dedicated properties.
Add a dedicated binding and update STM32 clock control driver
header to take it into account.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move this to where priorities are being discussed to keep things in
context and to have all priority types documented in 1 place.
Fixes#21648
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Reapply the part of 4b5cd92312
that added new functionality/fixed the actual issues described
in the original commit message withtout the further cleanup.
There was also some cross-commit content from
2b91ebe16e
as part of the cleanup in test_friendship.c which is also included.
+ added cleanup also to test_provision.c on request from Aleksandr.
Original commit msg:
-----------
Multiple bsim devices cannot store individual settings
with the existing settings backend for bsim.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
-----------
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This reverts commit 4b5cd92312.
global_device_nbr is used by many bsim tests.
And many of those are now off tree in preparation of the LE-Audio
work. Removing this for cleanliness now is not nice on others.
=> Revert
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The test checks the resistance of ble mesh stack to replay attack.
Replay protection cache shall store seqAuth last frames.
Device shall filter out such messages on the transport layer.
Power on\off sequence shouldn't impact that
since replay protection cache is stored in settings subsystem.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Multiple bsim devices cannot store individual settings
with the existing settings backend for bsim.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The conversion to devicetree seems to be half lost
for this driver. There are already bindings and nodes for
compatible "altr,jtag-uart", update driver to use it.
Remove last mention of CONFIG_UART_CONSOLE_ON_DEV_NAME.
Resolves#37207
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove CONFIG_UART_MCUMGR_ON_DEV_NAME and use
DEVICE_DT_GET(DT_CHOSEN(zephyr_uart_mcumgr)).
Add usb.overlay, which contains chosen node and cdc-acm-uart node,
to smp_svr sample.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add usb.overlay which contains chosen node and cdc-acm-uart node.
Update USB configuration and test case.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Allow UART driver that offload interrupt processing
to workuqueue, like CDC ACM UART to work.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove device_get_binding(CONFIG_UART_CONSOLE_ON_DEV_NAME)
and use DEVICE_DT_GET(DT_CHOSEN(zephyr_console)) to get
chosen "zephyr,console" node.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove UART_CONSOLE_ON_DEV_NAME and UART_SHELL_ON_DEV_NAME options
and add chosen nodes for shell and console.
Enable USB device support because the board uses
CDC ACM UART for console.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove UART_CONSOLE_ON_DEV_NAME and UART_SHELL_ON_DEV_NAME options
and add chosen nodes for shell and console.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains chosen node
Rework sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Rework NCP interface configuration and NCP sample. Remove
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_DEV_NAME and
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_ACM Kconfig
options in favor of chosen node zephyr,ot-uart usage.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add usb.overlay which contains chosen node and cdc-acm-uart node.
Change sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains chosen node and cdc-acm-uart node.
Rework sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains cdc-acm-uart nodes.
Rework CDC ACM and HID samples to get CDC ACM UART device
from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains cdc-acm-uart node.
Rework sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add hidden Kconfig option to Kconfig.cdc and allow
to configure CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Current USB device controller drivers (drivers/usb/device)
do not use DEVICE_DT_GET but the properties from devicetree,
and USB device controller node is parent for CDC ACM UART and
AUDIO children nodes.
Add USB device controller binding and node to keep the samples
building for native_posix driver.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add zephyr_udc0 (USB device controller) nodelabel to
specific USB node to allow generic USB samples to be build.
Follow up on commit e4f89478
("boards: add zephyr_udc0 nodelabel to all boards with USB support")
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
