With current CSS construct like void f() are rendered together, i.e.
voidf(). Add some spacing to make it more like "void f()".
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The scrolling customizations were used to hide the logo when scrolling
down. With this change, logo is always displayed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since logo already brings to home page, remove the link displayed above.
It saves some vertical pixels while making docs nicer. Also adjusted
wy-menu-vertical max-height to account for the new height (note: was
wrong before).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit forces the `CONFIG_BUILD_WITH_TFM=y` option when
using the `_ns` build targets for the LPC55sXX.
Using these targets in samples or in CI without an accompanying
secure environment image (ex. TF-M) leads to execution failures,
since the NS images are offset a predetermined amount.
Fixes#35100
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Add empty Z_LOG_MSG2_SIMPLE_CREATE when CONFIG_LOG_SPEED=n. It
allows to reduce compilation time by removing code at preprocessor
stage. Previously functionality was the same, compiler was removing
unused code but because logging is widely use that had a visible
impact on compile time.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Do not assert initialization priority when building
with CONFIG_TRUSTED_EXECUTION_SECURE=y.
Regulators are not enabled so should not assert
initialization chain priorities.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Converts the display driver and lvgl sample.yaml to select boards for
the adafruit_2_8_tft_touch_v2 shield configuration by depending on the
arduino_{gpio,i2c,spi} features instead of using an explicit
platform_allow list. This will enable twister to automatically select
new boards that add support for Arduino ports.
The reel_board and reel_board_v2 are excluded due to a conflict between
display drivers (onboard display vs. shield display).
The ubx_evkannab1_nrf52832 board is excluded due to a conflict between
the arduino_spi and arduino_i2c ports, which cannot be used
simultaneously.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds arduino_spi to the list of supported features for all NXP boards
that define an arduino_spi node in their device tree. This enables
twister to select these boards for tests or samples the depend on this
feature.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
When using the uart driver with interrupt and async api
at the same time (instance for interrupt and instance for async),
the transmission complete interrupt was handled in the async
handling section, even when interrupt driven api is used.
This caused transmission to not work properly in interrupt mode.
The fix is to move the interrupt mode handling to the begginning
of the isr. If async mode is used then interrupt mode code
will not be run.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
The reboot option of the +KSRAT command is only
supported by newer firmware.
Add a check to determine what version of the command
to use when setting the RAT.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Rename the NXP LPCXpresso55S16 board definition from
lpcxpresso55s16_ns (non-secure) to lpcxpresso55s16 and remove TF-M
configuration options.
While the LPC55S16 does have Arm TrustZone support, there is no TF-M
support available upstream yet.
Fixes#35100
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The send_reliable function was reused in multiple places as part of the
k_delayed_work changes for Bluetooth Mesh in #33782. This function
contains a line that resets the start timer, causing prov_retransmit to
continously move the goal post for when to give up sending.
Extract this line out of the send_reliable function, and put it along
with the other link.tx initialization in bearer_ctl_send and
prov_send_adv.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Change the return value from -ENOTCONN to -EINVAL as that
is a more appropriate return value for checking a NULL
pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change from -ENOTCONN to -EINVAL as that is a more appropriate
return value for checking a NULL pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of return -ENOTCONN they will now return -EINVAL as
that is a more appropriate return value for checking if
the pointer is NULL.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When application calls TCP connect(), the call is blocked
by a semaphore which is then released when the connection
is established. Unfortunately the semaphore release was done
before the connection was marked as established. Depending
on the configuration options set, it is possible that after
the semaphore release, the thread that is waiting on connect()
is run immediately. Because of this, the connection bookeeping
still thought that the connection was not established even if
it was. A simple solution is to release the semaphore after
the connection is marked as established.
Fixes#35390
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit modifies st prescaler value from 0 to 10000 for
STM32 nucleo_f207zg. So pwm_api test results in successful
execution on nucleo_f207zg board.
Signed-off-by: Sidhdharth Yadav <sidhdharth.yadav@hcl.com>
The coverity report "Out-of-bounds access". The reason is
The room of src and dest buffer is less than the count wanted
to be copyied. So enlarged the src and dest buffer to solve this
issue.
Fixes:#35345
Fixes:#35346
Signed-off-by: Ying ming <mingx.ying@intel.com>
Enable the :members: option by default when using breathe directives.
This exposes automatically stuff like structure fields.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The way some structures were documented was causing issues on the
Sphinx/Breathe side. Move to a more "standard" format.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When duplicates exist the problem may come from two or more distinct
constructs. When running parallel builds there is no guarantee on which
one will come first (or if all), so allow any C construct.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When this option is enabled some data structures have missing pages. Use
the default setting (NO).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This patch adds a label property to the GPIO LED parent node and fixes
the label property description of the child node. Indeed it is the label
of a parent node which can be used as device_get_binding() parameter to
retrieve the LED device, and not the one of a child node.
In addition, this patch sets both this properties as not required
because they are not.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
This patch adds a label property to the PWM LED parent node and fixes
the label property description of the child node. Indeed it is the label
of a parent node which can be used as device_get_binding() parameter to
retrieve the LED device, and not the one of a child node.
Fixes#34275
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
If the label property is missing in a "pwm-leds" compatible DT node
(which is almost always the case), then the device name is now set to
DT_NODE_FULL_NAME instead of "LED_PWM_$inst" previously.
This allows applications to use the DEVICE_DT_NAME macro to retrieve
the device name instead of gessing an arbitrary string.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
In tests that expect returning error in response for l2cap
connection request we use predefined PSMs. This commit adds
check for required keysize (which will always return error,
as connection is not secure and key size will always be 0)
instead of setting security level 4 (which would return
insufficient authentication, not insufficient key size).
It also adds suport for PSM used in insufficient authorization
tests - choosing this PSM will set flag that triggers error
on channel accept.
This affects tests L2CAP/LE/CFC/BV-[10-15]-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
* boot_serial: allow to build when CONFIG_MULTITHREADING=n
* allow to not provide scratch area definition if scratch
algorithm is not used.
fixes#35048
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
On Apollo Lake, each GPIO controller has more than 32 pins.
But Zephyr API can only manipulate 32 pins per controller.
So the workaround is to divide each hardware GPIO controller
into 32-pin blocks so each block has a GPIO driver instance.
Compounding to the issue is that there cannot be two device
tree nodes with same register address. So another workaround
is to increment the register addresses by 1 for each block.
So when mapping the address, the lowest 8-bit needs to be
masked to get the actual hardware address.
Fixes#28551
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Publish docs every 3 hours, this way fixes early in the morning are
reflected online earlier and no need to wait until the next day.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The current location makes no sense because this is for users, not
contributors. Put it in the GSG since a previous attempt to restore
its location under the user guides was rejected in favor of this
location.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
One of subtests had been supposed to check if log files are numbered
properly and in continuous manner, but due to logic error it would
also count non-log files.
Fixes: #33629
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Fixes sample execution ending early with error, as it attempted
to mount the LittleFS partition second time, after it has already
been mounted by the auto-mount feature.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
`check-warns` step is no longer used since the introduction of
`warnings_filter` extension.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit fixes a bug where outdated RPL entries might not be removed
properly from the persistent storage making those entries dead.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
