This commit increases the heap size for the newlib nano test to 2048,
which is the recommended minimum required to ensure proper operation
(see #35799).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new `CONFIG_NEWLIB_MIN_REQUIRED_HEAP_SIZE` config
that allows user to specify the minimum required heap size for the
newlib heap, and makes `malloc_prepare` validate that the memory space
available for the newlib heap is greater than this value.
The default minimum required heap size values were empiricially
determined, so as to allow the basic standard C functions such as
`printf` and `scanf` to work properly.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Short update to list of changes to MCUmgr that impact Zephyr.
Note to Shell on changes that affect mcumgr.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The ehl_crb board has hardware issue that prevents this test from
being able to pass this otherwise-correct test. So exclude ehl_crb
from the testcase.yaml.
Fixes#33544.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Update documentation for H3ULCB board following the
addition of new features during v2.6 windows.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Two code-blocks were not correctly rendered, due to missing
empty lines before them. This commit fixes this.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
* Add high level bullets about tracing & power mgmt
* Removed duplicated bluetooth section
* Remvoed RISC-V section, to changes of note for this release
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Recent rework in logging api brings complicated macros which can
overhelm Eclipse CDT parser.
This workaround disables expansion of LOG_xxx macros in Eclipse.
Signed-off-by: Jan Pohanka <xhpohanka@gmail.com>
Add to the v2.6 release note all Renesas R-Car drivers
that have been merged during this period.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Commit f5c6afeccb attempted to avoid
accessing lpc55xxx flash registers in nonsecure mode by conditionalizing
part of the SoC clock initialization routine on whether the flash driver
was enabled. This caused secure applications without the flash driver
enabled (e.g., hello_world on lpcxpresso55s69_cpu0) to not boot or show
any console output. Fix this by changing the condition to depend on
whether we are building a nonsecure image.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Remove minnowboard configuration which is very basic and can be brought
back by just taking another X86 configuration. We have not tested this
board for a while and it is not being used actively, so remove it.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board was added to test coverage feature when coverage was
introduced. This is now being testing with other boards and
configurations on a regular basis, so no need for this extra overhead in
CI.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix Extended Advertising PDU population from incorrectly
populating new PDU when there is no common extended header
flags being set in the previous PDU and or the new PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Periodic Advertising PDU population from incorrectly
populating new PDU when there is no common extended header
flags being set in the previous PDU and or the new PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated advx test to verify previous sync data when no
extended header flags are set in the PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Periodic Advertising data population from corrupting
the PDU by populating fields when there is no flags in the
common extended advertising header.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated advx test to verify sync data when no extended
header flags are set in the PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a status check for the BIG sync established and
BIG sync created events such that we don't log a warning
of invalid BIS count when it is an error event.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Currently the MBEDTLS_HAVE_TIME_DATE mbedTLS option is enabled based on
the CONFIG_POSIX_API option. This doesn't seem right, since the enabling
the POSIX API does not guarantee that there is a valid time source in
the system. This was the case for the qemu_x86 platform, where enabling
POSIX_API caused TLS handshake failures due to certificate validation
errors caused by no valid time avaialble in the system.
Fix this by adding a specific KConfig entry for date/time configuration
in mbedTLS. Applications that need to enforce date verification in
mbedTLS should enable it explicitly instead of relying on the
non-obvious implicit configuration.
Fixes#35401
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If the supplied sjw in the timing parameters is zero,
the sjw parameter should not be changed.
This fixes the uninitialized swj in can_set_bitrate.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Fix the compilation of board.c when the DAPlink QSPI MUX devicetree
node is enabled.
Fixes: 3632815e2e
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Fix the compilation of i2c_gpio.c after the gpio_config() syscall was
removed.
Fixes: 3632815e2e
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Just the extensions changes for Zephyr 2.6, since west has its own
release notes page as it's developed on its own pace.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fix a regression for cleaning up BIGs added by
80c824f18ee80caa5bd162b9d2957dde1639add6 where the way
ISO connections were unref'ed was changed.
bt_iso_cleanup has been changed to only effect CIS
(as the unref from that has been removed), so instead
of calling bt_iso_cleanup we just call
bt_conn_unref directly.
This also removes some unref's from the BIG complete
and BIG Sync complete event handlers as the BIS bt_conns as
they don't increase the ref counter before anymore.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
BT_L2CAP_LE_ERR_INVALID_PARAMS shall be returned instead of
BT_L2CAP_LE_ERR_UNACCEPT_PARAMS.
This was affecting test case L2CAP/ECFC/BV-26-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
For more than one requested channels in le_ecred_conn_req only result is
overwritten in every iteration. This causes an issues if after failed
l2cap_chan_accept occures successful one: returned result will be
BT_L2CAP_LE_SUCCESS, where in reality should be returned error
and non-zero Destination CIDs will signal "Some connections refused".
Now, overwrite error only if the last one failed. If no errors occur,
result will remain BT_L2CAP_LE_SUCCESS.
This was affecting test cases L2CAP/ECFC/BV-20-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Fix missing 0x0000 CIDs in response for ecred_conn_req. Previously,
when one of "All connections refused" error i variable was set to 0,
thus no CIDs were copied to response.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
The workflow was pointing to `master` instead of `main`, which
prevented it from running after the branch was renamed.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Move to using port property for a few cases in which we need to know
which specific hardware port a device is for. This allows us to
remove the PORT0/1 Kconfig options. This also fixes the issue that
assumed pio0 would map to DT_INST(0) and pio1 would map to DT_INST(1)
Fixes#35693
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a port property to describe which hardware port a GPIO device node
is describing since we can't tell from the registers (as the registers
are interleaved in the same MMIO space).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Check correctness of returned sync_handle value while requesting
HCI_LE_Set_Connectionless_IQ_Sampling_Enable in controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix bug of missing sync_handle parameter in return data in
HCI_LE_Set_Connectionless_IQ_Sampling_Enable commnad
handling function.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix peripheral sample handling of string values. The read callback
uses strlen to get the length of the current string value. Make sure
that the string value is always zero-byte terminated.
Fix multiple characteristics using the same storage for its value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Log failure to initiatet security for bonded peer when GATT wants to
initiate security for CCCs for the remote.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Notify application about prepare write error when continueing the write
procedure fails when RX thread is processing responses. It is possible
that this operation fails, either because of disconnection or ATT
timeout on the ATT bearer. Notify the application in case it needs to
clear up resources, e.g. the write parameters.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We now have function properties which can replace the confusing message
in the doxygen docs.
Fixes#10499
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
