Align with the new inclusive naming terms in the v5.3 spec in the
Bluetooth Host implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Align with the new inclusive naming terms in the v5.3 spec in the
Bluetooth shell implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To avoid hitting the following violation:
Violation to rule 5.7 (Tag name should be unique)
Replace the use of "shell" in the shell as an instance of a pointer to
const struct shell.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Align with the new inclusive naming terms in the v5.3 spec in the
controller's HCI implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix power-save-mode (PSM) operation.
When in PSM, do not bring the networking interface down
when an out-of-coverage event occurs.
When PSM goes into hibernate, this will cause an
out-of-coverage event to occur, even though the device
still has access to service.
Keeping the networking interface in the up state
allows an app to send data whenever it needs to.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Remove the HL7800 DTR device tree binding because the
DTR IO is not needed for operation of the HL7800
modem.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Using DTR to control sleep modes is a legacy mode
of operation. Remove control of DTR IO.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
Sleep mode 0 (driven by DTR) is only recommended for use
as a legacy option.
Sleep mode 1 is recommend by Sierra Wireless.
Signed-off-by: Ryan Erickson <ryan.erickson@lairdconnect.com>
From 2.4 to 2.7 the net samples pair echo-server/client increase the
SRAM requirements. This adjusts example features to free necessary SRAM
to run example.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The Counter resource in the IPSO Push Button object was incremented
silently by the post write handler of the State resource. This prevented
the resource from being marked as updated, effectively preventing
the engine from sending notifications to observers.
Fix this, by setting the new counter value with `lwm2m_engine_set_u64()`
instead. This will update the resource value, and trigger the engine to
send notifications if needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit corrects the DMA channels for the asynchronous
UART API testing support on the SAM R21 Xplained Pro board.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
uart_sam0_dma_tx_done callback triggers when the last byte
is transferred from the tx sram buffer to the sercom DATA register.
However the byte has yet to be transmitted completely which can lead to
incorrect event handling if UART_TX_DONE is expected to signal
the end of transmission.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
Fixes a compile error for the err_check function not being found if
if CONFIG_UART_INTERRUPT_DRIVEN is not enabled.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
fixes peripheral drivers such as async uart that rely on dma being
ready failing because dma is not initialized yet.
Signed-off-by: Ron Smith <rockyowl171@gmail.com>
Includes support for USB, CAN, ADC, DAC, and Arduino GPIO Map.
Future could support: ETM Trace (if Zephyr supports it), QSPI, FMC, DCMI
Initially based on closest BSP for the same SoC: nucleo_f446re
Extra peripherals added based on closest BSP for nucleo-144 board:
nucleo_f429zi
Checked against nucleo-144 schematic
Documentation updated as best as I could
Arduino compatible pinmux for SPI, UART and I2C via Zio header
Tested:
USB Device mode (samples/subsys/usb/console)
Console via ST-link usart3 (samples/hello_world)
user LEDs (samples/basic/blinky)
scripts/twister --device-tests -p nucleo_f446ze
Not tested but should work: SPI, I2C, CAN, ADC, DAC
Not working yet: Quad-SPI (missing in dts/arm/st/f4/stm32f4.dtsi)
Co-authored-by: Alexandre Bourdiol
<50730894+ABOSTM@users.noreply.github.com>
Signed-off-by: Tom Owen <tom.owen@zepler.net>
This patch fixes wrong PLIC irq number of UART and SPI for SiFive
FU740 on HiFive Unmatched. Use samples/subsys/console/echo for
testing.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
On those STM32 series, setting of this feature is conditioned to
the ADC state: it is allowed to set/reset the oversampler (OVSE bit)
and set the Oversampling ratio (OVSR bits) in the ADC_CFGR2 register
only when ADC is disabled or enabled without conversion on going.
Then is the ADC re-enabled.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
On those STM32 series, setting of this feature is conditioned to
the ADC state: it is allowed to write the Data resolution (RES bits)
in the ADC_CFGR1 register only when ADC is disabled (ADEN=0).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Adding test for features that are now available on h3ulcb.
We are ignoring isotp tests because of the internal loopback
implementation of the R-Car CAN controller which is sending
Rx isr before sending the Tx isr, totally confusing the Zephyr
ISOTP state machine and causing false positive.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Add an array similar to the bt_conn (ACL/L2CAP)
tx sent callback, and initialize it.
This increases the number of bt_conn_tx available
such that ISO does not take any of "L2CAP's" buffers,
but also ensures that the sent callback is called
for a broadcast iso only build.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In the file variable val is not initialized,
causing the variable stack_ptr, pos, points to uninitialized data.
Initialize the variable val according to the code and commits.
Fixes#37916
Signed-off-by: Naiyuan Tian <naiyuan.tian@intel.com>
A bug fix release with many zephyr with the most significant being a
workaround for the RTT issue we had in the previous release, fixing
the locking problem which could
result in garbled data when using high frequency processors.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The new inclusive naming terminology changes in v5.3 of the Bluetooth
specification affect the HCI layer, so apply all relevant changes to
align with it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
AMP functionality was removed from the v5.3 specification. Remove
AMP-related macros since they no longer map to anything in the spec
itself.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix the definiion of Common Extended Payload Format data
field in the PDU definitions to be zero-length array,
because PDU size are configurable and to avoid allocations
being made using these PDU structs.
Corrected the extended scan response length check code to
use the correct define instead.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Advertising stop on duration by using the
ticks_drift which now includes the random delay and any
ticker rescheduling of advertising radio events due to
collision with other radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The ticker `ticks_drift` is propagated via the ticker
elapsed callback, in order to provide necessary information
to correctly calculate total elapsed durations by states and
roles that use ticker extensions to mitigate scheduling
collisions by drifting within a permitted window.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The function usdhc_board_access_init was returning a non-zero
value as the variable "ret" is also used to store the GPIO
level for card-detect.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
HTTP_DATA_FINAL was incorrectly notified in case Content Length field
was present in the HTTP respone - in such case it was set for every
response fragment, not only the last one.
Fix this by relying on `message_complete` flag instead of
`http_should_keep_alive()` function to determine whether to notify
HTTP_DATA_FINAL or not. As the HTTP parser calls the
`on_message_complete()` callback in either case (response is chunked or
not), this seems to be a more reasonable apporach to determine whether
the fragment is final or not.
Additinally, instead of calling response callback for
`on_body`/`on_message_complete` separately, call it directly from
`http_wait_data()` function, after the parsing round. This fixes the
case when headers were not reported correctly when the provided buffer
was smaller than the total headers length, resulting in corrupted data
being reported to the user.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Tests are reported as skipped if they are only being built. Fix this by
checking for the correct status.
Fixes#37475
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
