Use --integration testing for CI to limit execution and builds on
platforms that actually provide most of the coverage instead of blindly
building/running on all available platforms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The tests were failing when run on those boards that had
physical Ethernet support. In that case there were three Ethernet
interfaces, two simulated ones for testing, and the third one
was provided by the board. This extra Ethernet interface caused
the test to fail as the test was sending data to wrong interface.
Fixes#27238Fixes#26568
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We now have a variant x86 build target that only is run
for tests tagged with "xip", which is this one.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adds a troubleshooting section to the frdm_k64f board document that
describes how to unlock the flash after normal west flash/debug commands
fail.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The flash_img_int return value is not checked for fail conditions.
This can result on useless download attempts once image will not
be properly recorded. Add return value check and on error execute
default treatment.
Fixes#26992.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The struct pollfd context variable is not proper initialized and index
is out-of-bounds. Adjusts index to be inside scope boundary.
Fixes#26993.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Support for the Nucleo L452RE-P has been added. Since it's very similar
to L452RE board, both of them have been added under the same directory.
The main difference is that the P version contains a SMPS but Zephyr is
not taking advantage of it yet.
I've tested the results in a real L452RE-P board.
Signed-off-by: Xabier Crespo Álvarez <x.crespo@scrobotics.es>
* fixed package version included in the devboard
* fixed uart2_rx pin/port
* added missing peripheral pinouts
* modify image name to follow the naming of the rest of the boards
Signed-off-by: Xabier Crespo Álvarez <x.crespo@scrobotics.es>
If a setting read is attempted from a store that doesn't support
reading return an error rather than faulting.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Applications using IPM callbacks get the imp device instance pointer
now through the callback. Which help to clarify a bit the code here and
there as well.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Of course IPM drivers now provide their device instance. There are 2
drivers using IPM callbacks as well, so they get the imp device instance
pointer now through the callback.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's normalize the callback like it is done in other APIs.
This will avoid the need to do not so nice code (storing the ipm device
pointer as global, or else) and more importantly will help to move all
device instance to constant.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Until now, each and every driver had to redeclare the type to store such
pointer, now they will be using this typedef.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Normalize callback like other APIs.
This clarifies the callback usage. It will also help to switch all
device instance to constants.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It was already using uart_irq_callback_user_data_set below, now it also
uses uart_irq_callback_user_data_t as callback type, so let's normalize
the callbacks.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The device pointer is now provided to the callback, there is no need to
call uart_callback_set() with the device being set a user data.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All other API provide the device pointer to the callback it's going to
call. So fixing this in UART.
This will avoid passing the actual device pointer as a user data (thus
enabling user data for something else).
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All other API provide the device pointer to the callback it's going to
call. So fixing this in UART.
This will avoid passing the actual device pointer as a user data (thus
enabling user data for something else).
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
s/port/dev
dev is being used everywhere else so let's rename port to dev.
And the parameter documentation should be the same for all.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Currently, OpenThread builds produce warning from the OT logger module,
because we don't use one of the parameters provided by logger macro.
Explicitly mark the parameter as unused to prevent warnings being
thrown.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The sanitycheck tests are all failing for the lpcxpresso11u68 board
because the lpc_checksum, a new python script requirement introduced
by this board, is not present in the build environment. This
commit attempt to fix this issue by installing lpc_checksum before
running sanitycheck.
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
This patch adds support for the LPC11U68 LPCXpresso board based on the
LPC11U68 SoC.
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
On some NXP LPC MCUs (such as LPC11U6x), a valid firmware image must
include a checksum in the 7th entry of the ARM Cortex-M0 exception
vector table. This checksum is verified by the bootloader.
The lpc_checksum.py python script allows to insert this checksum into
the firmware images (BIN and HEX formats).
Project page: https://github.com/basilfx/lpc_checksum
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
This commit adds the device tree nodes and bindings for the I2C
controllers of the LPC11U6X MCUs
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
This patch adds adds an EEPROM driver supporting the on-chip EEPROM
found on NXP LPC11U6X MCUs. Note that this driver is only a wrapper
relying entirely on the IAP (In-Application Programming) EEPROM
commands.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
This patch adds the iap.h header file which provides an entry function
for the IAP (In-Application Programming) interface. Note that the IAP
commands are located in the boot ROM code. Mostly they provide access
to the on-chip flash and EEPROM devices.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
