This PR will change accessing the related pinctrl macro from soc_dt.h
And the pinctrl of SCL and SDA were got from pinctrl-0 and pinctrl-1,
respectively. Change it to get from pinctrl-0 only.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This commit enables the ARM DSP extension on the MPS2 AN521 SoC CPU1
(the CPU1 supports both FPU and DSP).
With this change, the CMSIS-DSP tests running on the
`mps2_an521_remote` board will use the DSP instructions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The CMSIS-DSP matrix binary_q15 tests should not be excluded on the
mps2_an521 board, which is one of the integration platforms.
This test was likely excluded because of the computation precision-
related failures; but, this failure is no longer observed, so there is
no reason to exclude it anymore.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the missing flash and RAM size properties for
mps2_an521 so that the integration tests that require large memory can
run on this board.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the missing flash and RAM size properties for
native_posix and native_posix_64 so that the integration tests that
require large memory can run on this board.
Note that the flash and RAM sizes of 64MiB specified here is an
arbitrary value choosen to ensure that all currently supported tests
can run, since there is no inherent limit for the POSIX boards.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the missing flash and RAM size properties for
sam_e70_xplained so that the integration tests that require large
memory can run on this board.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the missing flash and RAM size properties for
frdm_k64f so that the integration tests that require large memory can
run on this board.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds new testcases for the CMSIS-DSP transform test that
enable testing with hardware FPU.
Note that the common properties are relocated to each testcase because
the twister does not support specifying extra filter and tags.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP svm test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP support test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP statistics test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds new testcases for the CMSIS-DSP matrix test that
enable testing with hardware FPU.
Note that the common properties are relocated to each testcase because
the twister does not support specifying extra filters and tags.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds new testcases for the CMSIS-DSP filtering test that
enable testing with hardware FPU.
Note that the common properties are relocated to each testcase because
the twister does not support specifying extra filters and tags.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP fastmath test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP distance test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP complexmath test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP bayes test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP basicmath test that
enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new testcase for the CMSIS-DSP basicmath benchmark
that enables testing with hardware FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The commit that added this board forgot to add the simulation type and
the ARM FPU tests were being only built.
This commit adds the `simulation: qemu` property to enable running the
ARM FPU tests in QEMU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Ring buffer claims that no synchronization is needed
when there is a single producer and single consumer.
However, recent changes have broken that promise since
indexes rewind mechanism was modifing head and tail
when consuming. Patch fixes that by spliting rewinding
of indexes so that producer rewinds tail only and
consumer rewinds head.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added test cases that validates if ring buffer handles
correctly case with single producer single consumer from
different contexts.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Keep daily docker image in sync with PR based CI image. Need
this for both fix for uefi-run and cmake.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a little wait before completing the test to ensure both
central and peripheral side of the test completes before the
test exits.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix scan_data_status value from being incorrected OR-ed with
the advertising data status.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Simplify the implementation deciding the use of LLL
scheduling for scanning PDUs with close auxiliary offsets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to release Auxiliary Context on failure
to receive auxiliary chain being in LLL scheduling.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
We need to alloc node prior to calling lll_scan_aux_setup, otherwise
the same node will be peeked inside that function and it will overwrite
some data in our node (e.g. "extra" field).
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation to use LLL scheduling for close auxiliary
offsets when active scanning and initiating connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to resume primary PDU scanning window
after use of LLL scheduling to receive auxiliary PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When Auxiliary PDUs are scanning by the primary scan's LLL
scheduling, then flush the Auxiliary PDUs when processing
them in the ULL instead of using the disabled callback.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This can be used to check if pointer is a valid lll_scan_aux pointer,
e.g. if we need to decide what kind of struct is attached to RX node
for further processing.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We need to reset isr status before returning as otherwise irq will be
triggered over and over again.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to traverse the Extended Active Scanned
advertising PDUs, generate the Scannable Advertising and
Scan Response Advertising Report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When Extended Active Scanning hold back the received PDUs in
a linked list and send it to HCI together so that fields
present across these PDUs can be aggregated for generating
the LE Extended Advertising Report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Flush the scanned advertising PDUs to HCI while receiving
the scan response PDU when Extended Active scanning.
This reverts earlier implementation to remember the
advertising PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for Extended Active Scanning and generation of
Extended Advertising Report with Scan Response event type.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reverting Extended scanning with LLL scheduling as this is
causing unresolvable merge conflict with the commits that
is implementing the Extended Active Scanning support.
Subsequent commit add the revert implementation back again.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
