osdp_build_ctx() was returning fixed NULL and the subsequent code did
not check if ctx was NULL due to osdp_build_ctx() failures. Fix both
these issues.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Change how we handle the case of
CONFIG_CMSIS_V2_THREAD_DYNAMIC_MAX_COUNT=0 so that we don't create
a zero length array. Instead we can just ifdef out the code associated
with handling a dynamic stack allocation.
Fixes#28397
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit fixes the default partitioning of flash
in nrf5340 Application MCU, to comply with the nRF SPU
region boundaries. To properly align the partition start
addresses with SPU requirements we modify the start of the
slot0 and slot1 partitions. This leaves some extra space
available for MCUboot, whose size is now changed from
0xc000 to 0x10000. In addition, the non-secure partition
size (slot0_nonsecure) is decreased, and as a consequence
of that we also modify the board's .yaml file to reflect
the new image size of the non-secure version of the board.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit fixes the default partitioning of flash
in nrf9160 Cortex-M33 MCU, to comply with the nRF SPU
region boundaries. To properly align the partition start
addresses with SPU requirements we modify the start of the
slot0 and slot1 partitions. This leaves some extra space
available for MCUboot, whose size is now changed from
0xc000 to 0x10000. In addition, the non-secure partition
size (slot0_nonsecure) is decreased, and as a consequence
of that we also modify the board's .yaml file to reflect
the new image size of the non-secure version of the board.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
As discussed in #22668, there is additional risk ascociated with
splitting linker files, as one may update one script and not be
aware of the other. Especially related to updating GNU ld, and
not mwdt could break code for mwdt unnoticed, as mwdt is not
part of CI.
Let's create a single entry point for linker template.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Align multiline string definition syntax in ASSERT in linker
script. This allows to use linker script with ASSERT provided
by linker (i.e GNU toolchain) or dummy ASSERT defined as
preprocessor macros (ARC MWDT toolchain).
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
When attempting to bind a channel if it fails the code will attempt to
cleanup calling bt_iso_cleanup which expects connections of
BT_CONN_TYPE_ISO.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ISO connection does not initialize its tx_complete_work nor it uses for
anything so calling into tx_notify will likely cause a crash.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit 770f232a67 removes an array
termination from the shell_make_argv function. This function was
called from two functions: execute and tab_handle. In the mentioned
commit termination was added only in the execute function.
As a result calling tab_handle function was causing a segmentation
fault. This fix adds array termination to the tab_handle function.
Fixes#28434
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
In all Nordic boards that contain ICs that support hardware stack
protection, turn it on by default so that we detect
stack overflows easier.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix the structures so that they are compliant with the stricter checks
of GCC 10.x, and at the same time correct a bug that was present in the
handling of the GAP Start Advertising BTP command.
Fixes#28375.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When to->dticks is an int64_t it may happen that the calculated
remaining time is a value that cannot be exactly represented in the
destination int32_t, producing an implementation-defined result which
can include a signal (interrupt). Cap the maximum delay to the
largest value suported by the int32_t result.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
How to manage repositories that require authentication to fetch from
using west is a frequently asked question.
TL;DR on the answer is that Git already has credential storage built
in, so our expectation is that there is nothing west needs to do in
particular, as users can select whatever credential helper works for
them, or set up a custom one using something like the GIT_ASKPASS
environment variable.
That's not a very helpful expectation if people aren't aware that
credential helpers exist, though, so let's document that and provide
examples for common use cases, as well as west-specific
troubleshooting advice.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add regex in testcase.yaml to verify the kernel will dump
thread id information and error type when exception occurs.
Signed-off-by: Ying ming <mingx.ying@intel.com>
Modify the location of the test case file because new
test cases need to be submitted. If the old test
cases are not in a folder, CI will fail and
prompts "the command exited with status 1".
Signed-off-by: Ying ming <mingx.ying@intel.com>
How-to guide has 0.11.3 SDK
Replace with the latest one SDK 0.11.4 in the documentation
description and links.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The boot code of x86_64 initializes the stack (if enabled)
with a hard-coded size for the ISR stack. However,
the stack being used does not have to be the ISR stack,
and can be any defined stacks. So pass in the actual size
of the stack so the stack can be initialized properly.
Fixes#21843
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Using SCB_CleanInvalidateDcache instead of SCB_DisableDcache
& SCB_EnableDcache when config the non-cache area, in case
of the cache will effect the configuration of the non-cache
area
Signed-off-by: Crist Xu <crist.xu@nxp.com>
The pinnacle_100_dvk board fails this test, but it was added after the
legacy DTS supprot was deprecated so we will just exclude the board
from being built on this test.
Fixes#28480
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
ESPI is supported in MEC15 chips but similar to PECI, I2C, eSPI bus
testing requires another device to act as eSPI host.
While this sample can be run in EVB the HW connection to a eSPI host
(Intel RVP) is not documented/supported.
Mark as not supported in that HW only in Modular card
(which setup is documented)
Also remove duplicate definition of the "depends_on: espi"
in the end of the sample.yaml file
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Add release notes covering the various ARM DesignStart FPGA related
additions in Zephyr v2.4.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The sam_e70_xplained and sam_v71_xult boards doesn't have disable wdt
and board name configs. This add missing defaults.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The 3124c02 introduced the requirement of CONFIG_BUILD_OUTPUT_HEX be on
the boards' default configuration in order for the runner to be passed
the path to the hex file being loaded. Add missing configuration for
Atmel boards that uses OpenOCD for flash and debug.
Fixes#28337.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
- use sizeof(struct data_item_type) instead of sizeof(data_item_type)
- use struct data_item_type instead of invalid reference data_item_t
- add aligned typedef struct data_item_type example implemenation
- add note about checking return value for error message
Fixes#19684
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Change so that the caller of lwm2m_init_message is
responsible for generating a message id and remove message id generation
from lwm2m_init_message. Prevents generating a new id when the caller's
intent is to init a message with id 0.
Fixes#28283
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
message id 0 and token 0 have special semantics in the lwm2m engine,
they are used to request generation of new id, mark them as such.
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
Now that CONFIG_BT_CTLR_RX_PRIO_STACK_SIZE defines a stack size, allow
for it to be configurable from a .conf file just like the rest of the
threads in Bluetooth.
Fixes#27768.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Move the call to timing_init() earlier before function call
to get frequency. Some arch/SoC/board require initialization
before there is a valid frequency value. Or else the printed
value would not be useful.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Replaces the current zero length array for provisioner data with
ifdefs, to silence new gcc 10 warnings about array element access.
Fixes#28371.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Added a note in documentation for k_mem_slab_alloc(),
k_mem_pool_alloc() and k_heap_alloc() are safe
to call in an interrupt with the timeout K_NO_WAIT.
Fixes: #28020
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
The correct return value is -ENOBUFS if we run out of network
buffers when sending the packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently the socket API is not thread safe so mention this in
socket API documentation. The plan is to add locks in 2.5 release.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
sys_trace_thread_abort and z_thread_monitor_exit in
z_thread_single_abort also need to be protected by
sched_spinlock, otherwise when after the spinlock
release, if there is an pending interrupt, it will cause an
sched in the interrrupt exit, and those trace and monitor
function will never reach.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Changes to paging code ensured that the NULL virtual page is
never mapped. Since RAM is identity mapped, on a PC-like
system accessing the BIOS Data Area in the first 4K requires
a memory mapping. We need to read this to probe the ACPI RSDP.
Additionally check that the BDA has something in it as well
and not a bunch of zeroes.
It is unclear whether this function is truly safe on UEFI
systems, but that is for another day.
Fixes: #27867
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
0.5 Mhz with 100 ticks per sec leaves 5000 cycles per tick,
which broke some tests that assumed more work within 1 tick.
Set to 1 Mhz: balance multi-core simulation speed and tick duration.
Fixes#27943
Signed-off-by: Ruud Derwig <Ruud.Derwig@synopsys.com>
