Since commit b3a1ede830 OpenThread uses the Zepyhr settings submodule
instead of writing to the flash directly. The flash.c file is not
compiled anymore, so let's just remove it. Also remove the
OT_PLAT_FLASH_PAGES_COUNT Kconfig option which was solely used by that
file.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Inspect the hex file with intelhex, and fail if the hex file has any
contents in the UICR area(s).
family == 'NRF52' still always does --sectoranduicrerase, but this
option is not available on other families.
Add --force command line option to proceed with flashing instead of
failing.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Add additional pinmux definitions for I2C1 and I2C2 that are used
on the stm32f030 series SoCs. Additionally, correct the PF0 and PF1 I2C
functions, which were swapped.
Signed-off-by: Brian Kubisiak <brian@kubisiak.com>
in pyocd-0.28 release pyocd can support below NXP rt1xxx
mimxrt1010
mimxrt1015
mimxrt1060
mimxrt1064
user can upgrade latest pyocd with
pip3 install pyocd -U
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Move the devicetree bindings for Analog-to-Digital Converters (ADCs)
from dts/bindings/iio/adc to dts/bindings/adc as Zephyr does not have
an IIO layer.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The standard and static MMU regions (_code, _rodata and _data) are
already covering all the available SRAM region and all the needed
sections. Remove the overlapping SRAM region.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Added automatic runtime calculation of Forced MD bit count
based on incoming Tx buffer throughput.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add Force MD bit feature wherein connection events can be
extended to match the rate at which applications provide
new Tx data. MD bit in Tx PDUs is forced on if there has
been CONFIG_BT_CTLR_TX_BUFFERS count number times Tx/Rx
happened in a connection event. The assumption here is,
if controller's tx buffers are full, it is probable that
the application would send more Tx data during the
connection event, and keeping the connection event alive
will help improve overall throughput.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add force Md bit feature wherein connection events can be
extended to match the rate at which applications provide
new Tx data.
Fixes#27981.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the check that decides to close a connection event,
which was missing a check on MD bit being set for empty PDU
to be Tx-ed out.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Optimize the Tx PDU preparation, empty PDU only needs MD bit
to be modified, other fields be initialised only at power up.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix premature connection event close due to the new Tx
buffers not being de-multiplexed and routed to connection's
Lower Link Layer context when they arrive while being
inside the connection's radio event.
Also, fix master prepare to demux and enqueue two Tx buffers
so that MD bit can be set correctly.
Relates to #27981.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor ull_conn_tx_ack function as it no longer needs to
return the connection context back to caller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Check that Ethernet header is in the first net_buf fragment.
This is very unlikely to happen as device driver is expected
to only deliver proper Ethernet frames to upper stack.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We run various TCP function from work queue. Make sure the
connection lock is taken before accessing the connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
support longer name like urn:dev:ops:{OUI}-{ProductClass}-{SerialNumber}
or urn:imei-msisdn:###############-###############
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
Reset rx byte counters when hw timer/counter is disabled.
Fixes issue where disabling and re-enabling async uart rx can produce
"UART_RX_RDY" events with invalid data when power management is used.
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
Only create the dir and file if we have actual "content" that will
exist in testcase_extra.conf. This is to reduce a bit of
noise/footprint in the sanitycheck output dir.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
According to comment memset() should be used instead of memcpy().
There is no need to access to address 0x0.
Fixes#28691
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
There are two shell sections on documentation. Move last section to
right place to fix documentation style.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
