Use rather MCUBoot implementation of some function than
zephyr's implementations once avielabel.
Zephyr implementations are needed while compiling application
supposed to be chainloaded by the MCUBoot or when they are
tested.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
It is possible that USB DFU class is used by MCUBoot
itself while it has enabled CONFIG_SINGLE_APPLICATIO_SLOT.
In this mode only application slot is the primary slot.
Adapted DFU class descriptor and services to optionally
serve only for one image.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
It is possible that dfu libraries are used by MCUBoot
itself while it has enabled CONFIG_SINGLE_APPLICATIO_SLOT.
In this mode only application slot is the primary slot.
Patch is required for supports USB DFU class in mentioned
MCUBoot's mode.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Fixes: #28462
This commit allows shields to be defined in other BOARD_ROOTs, either
using `-DBOARD_ROOT=<path>` or a Zephyr module defined BOARD_ROOT.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add support for CONFIG_NET_SAMPLE_SEND_ITERATIONS option so that
this sample can be run multiple times against HTTP(s) server
that is running inside a Docker container.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When calculating the size of unused interrupt stacks on SMP,
the "unused" variable is not cleared between CPUs. So this
value keeps incrementing and does not reflect actual unused
size for CPUs other than the first one. So clear the "unused"
variable for each CPU.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Using the same implementation as the rest of Zephyr reduces code size.
Update options and expected results for formatting test.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
All in-tree uses have been replaced by cbprintf, and the API was
private so there should be no out-of-tree users.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The minimal libc provided by Zephyr can use the Zephyr system
implementation rather than have its own implementation.
When combined with CBPRINTF_NANO some sprintf tests must be
skipped as they assume a more capable libc. Add an overlay
that supports testing this non-default combination.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Tests for most paths through the conversion infrastructure. Expected
output can be validated with the host libc by setting USE_LIBC within
the source.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit adds a C99 stdio value formatter capability where
generated text is emitted through a callback. This allows generation
of arbitrarily long output without a buffer, functionality that is
core to printk, logging, and other system and application needs.
The formatter supports most C99 specifications, excluding:
* %Lf long double conversion
* wide character output
Kconfig options allow disabling features like floating-point
conversion if they are not necessary. By default most conversions are
enabled.
The original z_vprintk() implementation is adapted to meet the
interface requirements of cbvprintf, and made available as an opt-in
feature for space-constrained applications that do not need full
formatting support.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This reverts commit e812ee6c21.
This is the initial step towards replacing the core Zephyr formatting
infrastructure with a common functionally-complete solution.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
BIT/_MASK doesn't necessarily handle 64 bits, so provide comparable
functionality for BIT64/_MASK.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
pdu->len is only 8 bits and CONFIG_BT_CTLR_ADV_DATA_LEN_MAX
can be upto 1650 bytes. Fix the implementation to use 16
bit auto variable to check AD data length overflow.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Advertising Data population when there is no
Extended Header to be filled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is done to facilitate multi image build systems
where child images could be associated with a different
core than the parent image.
In such situations, the name of the board associated with
the core of the child image must be known.
Boards for the 'CPUNET' domain is already in place.
This commit adds the boards for the 'CPUAPP' domain.
These would be needed if the parent image is build in the
'CPUNET' domain, and the child image is in the 'CPUAPP'
domain.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
For the application core, the `--device` parameter specifies only
the generic `cortex-m33`, so it is impossible for the debugger to
flash the target.
For the network core, the `--device` parameter is not present at all,
so it is even impossible to run the `debug` command.
This commit fixes the above issues by specifying the proper devices.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
In CMakeLists.txt, the MEC1501 specific timing functions are
only compiled if CONFIG_CORTEX_M_DWT=n. However, in SoC's
kconfig, CONFIG_SOC_HAS_TIMING_FUNCTIONS is defaulted to y
unconditionally. This results in the timing subsys looking
for SoC-based timing functions but those are not compiled.
So add a condition to kconfig similar to CMakeLists.txt where
SoC timing functions are only enabled when CONFIG_CORTEX_M_DWT=n.
Fixes#29969
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
.../ll_sw/nordic/lll/lll_scan.c: In function 'isr_tx':
.../ll_sw/nordic/lll/lll_scan.c:483:19: error: unused variable 'lll'
[-Werror=unused-variable]
483 | struct lll_scan *lll = param;
| ^~~
cc1: all warnings being treated as errors
This fixes https://github.com/zephyrproject-rtos/zephyr/issues/29968.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Remove the temporary fixes for installing lpc_checksum
and imgtool packages in buildkite. Not required with
the new docker image.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Update buildkite to use dockerfiles release 0.11.10.
Update both pipeline.yml and daily.yml.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Endpoint STALL should be cleared when Endpoint is enabled.
In particular when the HOST performs SetInterface requests
and Endpoints associated with that Interface are enabled
STALL should be cleared.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Clearing the PSIZE bits in the FLASH CR should not invert the mask
defined in stm32f4xx_hal_flash.h (#define CR_PSIZE_MASK 0xFFFFFCFFU)
Signed-off-by: Justin Brederveld <jmbrederveld@gmail.com>
Add a Kconfig option (enabled by default) the enables the low-frequency
oscillator (LFXO) functionality on the XL1 and XL2 pins in the nRF53
SoC initialization routine. This cannot be done in the clock control
driver, as it was done so far, because that won't work in a setup where
the application core image does not use the system clock at all.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Replace direct register accesses in the SoC initialization routine
with proper calls to nrfx HAL functions.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
- Add ESP DHCP Support
- Add ESP Static IP Support including
KConfig entries for configuring IP,Gateway and netMask
Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
This changes to use stack to store registers before calling thread
switch instrumentation functions, instead of using the thread's
register saving struct.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This uses the timing functions to gather execution cycles of
threads. This provides greater details if arch/SoC/board
uses timer with higher resolution.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Since the tracing of thread being switched in/out has the same
instrumentation points, we can roll the tracing function calls
into the one for thread stats gathering functions.
This avoids duplicating code to call another function.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the bits to gather the first thread runtime statictic:
thread execution time. It provides a rough idea of how much time
a thread is spent in active execution. Currently it is not being
used, pending following commits where it combines with the trace
points on context switch as they instrument the same locations.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
We should not be initializing/starting/stoping timing functions
multiple times. So this changes how the timing functions are
structured to allow only one initialization, only start when
stopped, and only stop when started.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Documentation for kconfig SYS_CLOCK_TICKS_PER_SEC has some outdated
recommendations. Changing them to align with other documentation
under kernel timing.
Fixes: #25482
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
If rand32_xoroshiro128::z_impl_sys_rand_get is called with outlen
not divisible by 4, it will overflow the dst buffer. This happens
because blocksize is not changed from 4 to the difference between
outlen and len. If outlen is < 4, z_impl_sys_rand_get will be stuck
in an infinite loop that keeps writing random bytes outside the buffer.
If outlen is > 4, z_impl_sys_rand_get returns after the correct number
of loops, but it writes every byte to the buffer, not just outlen number
of bytes. This causes the buffer to be overflowed with up to and
including 3 bytes.
Signed-off-by: Didrik Rokhaug <didrik.rokhaug@gmail.com>
This legacy struct still had a non-standard name. Clean it up to
conform to currrent naming guidelines.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
