Use a similar model to the pinmux_rv32m1 driver for kinetis pinmux
driver. We handle one subtle difference between clock on the KE1xF v
other SoCs.
As the Kconfig and devicetree label names are the same we maintain the
Kconfig options in the driver until all board users are converted over
to use devicetree instead of Kconfig.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add 'label' as a required property for nxp,kinetis-pinmux devices. In
addition we cleanup the kw2xd node labels for the pinmux devices to
match the SoC docs and use 'port' instead of 'pinmux_'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If a precision flag is included for s formatting that bounds the
maximum output length, so we need to use strnlen rather than strlen to
get the amount of data to emit. With that flag we can't expect there
to be a terminating NUL following the text to print.
Also fix handling of an empty precision, which should behave as if a
precision of zero was provided.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Fix broken references to K_THREAD_STACK_* and K_KERNEL_STACK_* macros
by adding those to the existing stack_apis group.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
The proper usage of @param in callbacks is currently unsupported by
Doxygen so not warnings are generated. The issues fixed with this commit
where found while adding support to Doxygen for validating @param in
callbacks like it currently does for functions.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Add an additional 4 ports for upcoming Arm based server that will have a
total of 12 I2C ports.
Similar to the original 8 ports, these additional 4 ports will not be
enabled unless specified at configuration time.
Signed-off-by: Dan Kalowsky <dkalowsky@amperecomputing.com>
During recent upmerge OPENTHREAD_CONFIG_PLAT_LOG_FUNCTION__COUNT_ARGS
macro was renamed to OPENTHREAD_CONFIG_PLAT_LOG_MACRO_NAME__COUNT_ARGS
but the code wasn't updated where the macro is actually used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Provide versions of ETH_NET_DEVICE_INIT that are both devicetree
node and instance aware. We use the _DEFINE suffix for the DT
versions to match the naming convention in device.h
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Provide versions of NET_DEVICE_INIT, NET_DEVICE_INIT_INSTANCE, and
NET_DEVICE_OFFLOAD_INIT that are both devicetree node and instance
aware. We use the _DEFINE suffix for the DT versions to match the
naming convention in device.h
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix the following complilation error that happens when specifying a
fixed MMIO address for the UART through X86_SOC_EARLY_SERIAL_MMIO8_ADDR:
arch/x86/core/early_serial.c:30:26: error: #if with no expression
30 | #if DEVICE_MMIO_IS_IN_RAM
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Apart from the previously added pins, nRF21540's GPIO interface includes
also MODE pin. This commit adds this pin to relevant devicetree.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Apart from the previously added pins, nRF21540's GPIO interface includes
also MODE pin. This commit adds it to the relevant binding.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
The FEM requires a dedicated SPI interface. This commit puts it on SPI3,
removing the arduino SPI support.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The nRF21540 radio front-end-module can optionally be controlled by a
SPI interface. Add a binding and property to link the SPI bus
configuration data to the FEM node.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This device is not an ARM MCU, it's a radio front-end module. Based
on existing Linux practice it belongs in net/wireless.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The STM32L0 series MCUs have quite basic timer features only, so we
remove some unavailable configuration options. They were properly
initilized by the LL StructInit functions for other MCUs anyway.
Signed-off-by: Martin Jäger <martin@libre.solar>
I've been working on ESP WiFi drivers for some time now, so I would like
to help review new patches.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Align bt_le_per_adv_sync_get_index, bt_conn_index and
bt_le_ext_adv_get_index in use of uintptr_t.
This fixes an issue where the cast to uint8_t happened before the
assert for a valid index, which could lead to invalid pointers passing
this assert.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add a sample for demonstrating the usage of the NXP MCUX Analog
Comparator (ACMP) sensor driver. The sample currently only supports the
NXP TWR-KE18F development board.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit contains some additional review comments that was posted
after board revision PR #29990 was merged.
The follow-up changes are:
- Fixed typo: REVIVISION --> REVISION
- Renaming leftover in print message:
zephyr_check_board_revision --> board_check_revision
- Fixed regex, to allow revision 10, 20, 30, 40, etc.
- digits --> number in comment
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add exception check for psutil when running CI with nSIM
Sometimes nSIM random failures may turn nsimdrv process into zombie
process, parent process can't terminate it by calling proc.wait(0.1)
and kill command doesn't apply to zombie process
Signed-off-by: Jingru Wang <jingru@synopsys.com>
According to CONFIG_ARMV8_A_NS, using MT_SECURE or MT_NS, to simplify
code change, use MT_DEFAULT_SECURE_STATE instead
Signed-off-by: Peng Fan <peng.fan@nxp.com>
As timer interrupt is level triggered, we need to mask it before leaving
ISR or it will be delivered again.
Also, Xen automatically masks timer interrupt when it injects IRQ to
a guest, so we need to unmask it again, when setting new timeout.
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Deduplicate final part of RX data processing for two supported cases:
passive (+CIPRECVDATA) and non-passive (+IPD). Move implementation to
esp_socket module, as this is strictly related to socket.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Split +IPD message handling into smaller logical functions, so it is
much easier to follow code and further improve it. Make sure to do as
much parsing work as possible, before accessing esp_socket object. This
will allow to introduce thread-safety locking just in the critical parts
in subsequent commits.
Prefer early return from function over goto to return instruction,
whenever cleanup code is not needed.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Current on_cmd_ciprecvdata handler is a bit overwhelming to follow.
Add a cmd_ciprecvdata_parse() helper, which is responsible only for
parsing received metadata (message offset and length), leaving socket
instance untouched.
Consume received payload later on, just after verifying that socket is
in valid state.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Improve logging of pairing procedure when it fails with error code
unspecified. Since this is returned in many places debugging this
failure is not easy without adding additional debugging.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix parallel pairing procedures using LE SC requiring the DHKey
calculation at the same time. This would otherwise end all other
pairing procedures with the SMP error code "unspecified" since
the call to bt_gen_dh_key would fail.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
