Since model struct most of member should not change at run time,
so mark as const will be suitable and safely.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Fixes incorrect unpacking of Heartbeat Publication status
messages on the Configuration client.
Reference to packing format: MshPRTv1.1 section 4.3.2.63
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Changed buffer length check in bt_mesh_comp_p1_elem_pull.
The previous threshold would result in the
method not detecting the final element when it consisted of just one
model.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Adds callback API for the following config client status messages:
- Composition data status
- Model publication status
- SIG model subscription list
- Vendor model subscription list
- Netkey list
- Appkey list
- SIG model app list
- Vendor model app list
- Key refresh status
- Heartbeat publication status
- Heartbeat subscription status
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Fixes erroneous packing/unpacking of model app list messages
in the configuration client and server. According to the mesh 1.1
protcol spec (4.3.1.1) two app indexes shall be packed in a 3 octet
interleaved format. The current implementation packs them in 4 octets.
This commit also provide a helper function for unpacking key indexes
as public API to facilitate future config model callback API.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Composition Data Page 1 contains information about relations between
models. Implementation saves relations into array of tuples
{ptr to base, ptr to extension, relation type} on model initialization
and uses this information to construct Composition Data Page 1.
Appropriate structures and methods were added to API, allowing user to
parse all received data into Composition Data Page 1 formats:
Composition Data Page 1 Element, Model Item, Model Extension Item.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Composition data page 128 represents the new composition data after a
composition refresh procedure. The implementation stores the old
composition data (before applying a DFU or similar), and uses that as
page 0 if present. As the device has already rebooted by the time page
128 becomes active, its active composition data is page 128, while the
backed up data is the "old" data, which should be shown as page 0.
Co-authored-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This prevents a Configuration Client from binding an app key to a model
that only supports DevKey-based security.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Running bsim with Valgrind highlighted a couple of
places where read access to uninitialized memory happens.
Config client rewrites publication parameters with not
initialized uuid pointer. Bitfields those are allocated on
the stack keeps not used area uninitialized too.
Uninitialized area is stored in the persistent memory.
PR fixes that.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The macros are added to make clear which fields of `struct
bt_mesh_msg_ctx` needs to be initialized by an application.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Functions related to string manipulation that were defined in
`common/log.h` has been moved to the `common/bt_str.h` file and their
implementation in `common/bt_str.c`.
Files that were using those functions has been updated consequently.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Convert model_ackd_send and model_send from health_cli.c to a common API
to get rid of code duplication in other client models that implement
synchronous messages' sending.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This PR adds a `*_cli_*` infix to the Config Client API to match
the changes in Health Client. The old API is marked as deprecated.
Signed-off-by: Michal Narajowski <michal.narajowski@codecoup.pl>
Adds missing feature so that the config client is able to receive
odd number of app index entries.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There is errata clarification (Errata ID:18700)
about subscriptions on fixed group addresses.
It is possible to subscribe models on non primary elements
on any fixed group address except all nodes address.
Devices should be able to receive messages on fixed addresses
even if they do not support the feature
to which the fixed group address belongs.
Signed-off-by: Aleksandr Khromykh <Aleksandr.Khromykh@nordicsemi.no>
Adds a Kconfig option for setting the Config Client and Health Client
timeout. Updates updates the default for Config Client to allow
reception of full sized message from a similar peer device at zero hops.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
The previous PR was not fully baked, so this PR fixes issues by:
- Adding checks when dereferncing pointers stored in params.
- Clearing ack context if a return argument is NULL to not block and
wait for response.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
- Do not ignore unsolicited status messages to allow for the API to be
- used asynchronously
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
param can never be NULL here, so the check is redundant. Coverity is
complaining because param is accessed before the NULL check.
Fixes#37949.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
param can never be NULL, so this check is redundant. Coverity complains
about this, as the param variable is accessed before the check, which
would be wrong if param could be NULL.
Fixes#37948.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
This commit adds missing API that allows to discard the Subscription
List of a vendor model.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add missing API:
- Delete all group addresses in a SIG model's subscription list
- Update a network key
- Update an application key
- Get/Set Node Identity parameters
- Set virtual addtess for a SIG model
- Get/Set Key Refresh Procedures
Signed-off-by: Agata Ponitka <agata.ponitka@codecoup.pl>
According to spec we should ignore messages with incorrect msg size.
This patch adds a check to every opcode handler.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
```
3.7.3.4 Message error procedure
When receiving a message that is not understood by an element, it shall
ignore the message.
Note: A message can be falsely identified as a valid message, passing
the NetMIC and TransMIC authentication using a known network key and
application key even though that message was sent using different keys.
The decryption of that message using the wrong keys would result in a
message that is not understood by the element. The probability of such a
situation occurring is small but not insignificant.
A message that is not understood includes messages that have one or more
of the following conditions:
• The application opcode is unknown by the receiving element.
• The access message size for the application opcode is incorrect.
• The application parameters contain values that are currently
Prohibited.
Note: An element that sends an acknowledged message that is not
understood by a peer node will not receive any response message.
```
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Align the capitalization of the term "Bluetooth Mesh" to Bluetooth mesh"
in the documentation. This is done to to match the new updated naming
convention done in Bluetooth SIG. In the upcoming spec versions, it its
used "Bluetooth mesh" with the lower case convention.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
The implementation of blocking calls is common for all the client
models.
This change reduces the code duplication by introducing new API that
helps to manage acknowledged messages.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds a parsing mechanism for Composition data page 0 in the Config
Client API, and uses it in the shell module to parse the incoming
composition data.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The first byte of the composition data status message is the returned
page index, not the status of the request. This is now reflected in the
API.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The Configuration Client doesn't check the address in a received
response. This means that a response from any device will be accepted.
This change ensures that the correct response will be accepted.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
