RT11xx series has similar pin configuration peripheral to RT10xx, with
some differences in register layout. Create new pinctrl definition
header file, and reuse existing driver code for RT10xx.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
iMX.RT parts use a GPR register for some pinmux settings. Update pinctrl
driver to support this GPR register definition.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
A follow-up to #44181, this time fixing the pyocd target parameters to
match the actual hardware on the board.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The lll_filter is used for rl_filter and fal_filter. Size of bdaddr
must be big enough for the worst case.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Add a brief overview and description of the GAF.
This also creates initial references to the LE Audio
implementations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add `ing` to the `BT_ISO_CONNECT` and `BT_ISO_DISCONNECT`
states, so that the name better matches the actual state.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add `ing` to the `BT_CONN_CONNECT` and `BT_CONN_DISCONNECT`
states, so that the name better matches the actual state.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a state field in struct bt_conn_info that is a simplified
version of the internal state value (bt_conn_state_t).
This should provide an application to better determine the state
of the connection whne calling bt_conn_get_info, in case the
application does not keep track of the state itself.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
mhz19b_sample_fetch() from mhz19b sensor driver didn't support
SENSOR_CHAN_ALL chan parameter value, so sensor_sample_fetch() didn't
work, always returning -ENOTSUP (sensor_sample_fetch_chan() worked, if
called with SENSOR_CHAN_CO2).
This change enables mhz19b sensor to work both with
sensor_sample_fetch() and with sensor_sample_fetch_chan() with
SENSOR_CHAN_CO2.
Signed-off-by: Konstantin Mochalov <incredible.angst@gmail.com>
The jlink executable expects a fully qualified IC name, and not just the
family. Apply to all Nordic boards.
Fixes#37294
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This implements the msi_device_setup() callback for ECAM controllers
used with an ARM GIC ITS MSI message translater.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Define the MSI/MSI-X APIs to be used with the Generic PCIe Controller API.
It notably adds the msi_device_setup() callback to the PCI Express
Controller API used to allocate and setup the MSI/MSI-C vectors on the
MSI message translater HW.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Add get_msi_addr() callback to ITS API to retrieve the GITS_TRANSLATER
physical address to be set in the MSI message address field.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Conditional compile ISOAL implementation to support ISO
Broadcast only and ISO Receive only application builds.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix compile error, compiling the connectionless direction
finding samples, due to missing include file.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Periodic Advertising Synchronization time reservation
updated when enabling/disabling direction finding IQ
sampling.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixes errornous arg index for new identity in cmd_node_id.
Fixes errornous arg index for uuid in mod_pub_set.
Fixes errornous arg index for net_idx in hb_pub_set.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Fixes errornous arg index for new identity in cmd_node_id.
Fixes errornous arg index for uuid in mod_pub_set.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Move variables to innermost scope - do not define the variable (and
read the value) until it is clear that the receiving callback exists.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Change return value from calls to player(s) to EINVAL.
These functions are guarded, so that if neither local nor remote
players are supported, the functions will not be accessible.
So no need to return EOPNOTSUPP. If the functions reach these
returns, it will be because the pointer provided does not match any
registered player.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
The calls to the players were guarded by "_LOCAL_PLAYER_CONTROL".
This was incorrect for two reasons:
- the second part of each function uses the remote player, not the
local one
- the first part of each function is for local control (only) of the
local player
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
This patch removes the redundant test case step.
Neither VCS/VCP nor MICS/MICP require ATT MTU to be other than default
23 bytes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This enables automatic MTU exchange for services that require MTU size
bigger than default ATT MTU to operate.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This adds support for automatic ATT MTU Exchange that will be done right
after the connection has been established.
Fixes: #43946
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This implements Core 5.3 recommendation to skip MTU Exchange procedure
if already performed by peer.
Core 5.3 | Vol 3, Part F 3.4.2.2:
If MTU is exchanged in one direction, that is sufficient for both
directions.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The MTU can be exchange once during the connection by the client.
This ensures the ATT MTU Exchange request will not be sent again.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
OCRAM can be used for DMA, and in this case it should be marked as
noncacheable. Add KConfig symbol and appropriate linker scripts to
enable OCRAM region to be defined as noncacheable, and initialized with
data from flash at boot.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Move the `pm_device_runtime_init_*` functions from <pm/device_runtime.h>
to <pm/device.h>. The initial device state should be settable
independently of whether `CONFIG_PM_DEVICE_RUNTIME` is enabled.
This also resolves a compilation error when attempting to use these
functions without also including <pm/device.h>.
Function documentation is also updated to be more general than only
referencing runtime PM, as this also applies to system PM and manually
run actions.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Move the media control client callbacks into the media proxy instance
struct, as requested in earlier PR review.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
