STM32WL features a specific HSE clock with dedicated properties.
Add a dedicated binding and update STM32 clock control driver
header to take it into account.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move this to where priorities are being discussed to keep things in
context and to have all priority types documented in 1 place.
Fixes#21648
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Reapply the part of 4b5cd92312
that added new functionality/fixed the actual issues described
in the original commit message withtout the further cleanup.
There was also some cross-commit content from
2b91ebe16e
as part of the cleanup in test_friendship.c which is also included.
+ added cleanup also to test_provision.c on request from Aleksandr.
Original commit msg:
-----------
Multiple bsim devices cannot store individual settings
with the existing settings backend for bsim.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
-----------
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This reverts commit 4b5cd92312.
global_device_nbr is used by many bsim tests.
And many of those are now off tree in preparation of the LE-Audio
work. Removing this for cleanliness now is not nice on others.
=> Revert
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The test checks the resistance of ble mesh stack to replay attack.
Replay protection cache shall store seqAuth last frames.
Device shall filter out such messages on the transport layer.
Power on\off sequence shouldn't impact that
since replay protection cache is stored in settings subsystem.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Multiple bsim devices cannot store individual settings
with the existing settings backend for bsim.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The conversion to devicetree seems to be half lost
for this driver. There are already bindings and nodes for
compatible "altr,jtag-uart", update driver to use it.
Remove last mention of CONFIG_UART_CONSOLE_ON_DEV_NAME.
Resolves#37207
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove CONFIG_UART_MCUMGR_ON_DEV_NAME and use
DEVICE_DT_GET(DT_CHOSEN(zephyr_uart_mcumgr)).
Add usb.overlay, which contains chosen node and cdc-acm-uart node,
to smp_svr sample.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add usb.overlay which contains chosen node and cdc-acm-uart node.
Update USB configuration and test case.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Allow UART driver that offload interrupt processing
to workuqueue, like CDC ACM UART to work.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove device_get_binding(CONFIG_UART_CONSOLE_ON_DEV_NAME)
and use DEVICE_DT_GET(DT_CHOSEN(zephyr_console)) to get
chosen "zephyr,console" node.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove UART_CONSOLE_ON_DEV_NAME and UART_SHELL_ON_DEV_NAME options
and add chosen nodes for shell and console.
Enable USB device support because the board uses
CDC ACM UART for console.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove UART_CONSOLE_ON_DEV_NAME and UART_SHELL_ON_DEV_NAME options
and add chosen nodes for shell and console.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains chosen node
Rework sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Rework NCP interface configuration and NCP sample. Remove
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_DEV_NAME and
CONFIG_OPENTHREAD_COPROCESSOR_SPINEL_ON_UART_ACM Kconfig
options in favor of chosen node zephyr,ot-uart usage.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add usb.overlay which contains chosen node and cdc-acm-uart node.
Change sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains chosen node and cdc-acm-uart node.
Rework sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains cdc-acm-uart nodes.
Rework CDC ACM and HID samples to get CDC ACM UART device
from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains cdc-acm-uart node.
Rework sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add hidden Kconfig option to Kconfig.cdc and allow
to configure CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Current USB device controller drivers (drivers/usb/device)
do not use DEVICE_DT_GET but the properties from devicetree,
and USB device controller node is parent for CDC ACM UART and
AUDIO children nodes.
Add USB device controller binding and node to keep the samples
building for native_posix driver.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add zephyr_udc0 (USB device controller) nodelabel to
specific USB node to allow generic USB samples to be build.
Follow up on commit e4f89478
("boards: add zephyr_udc0 nodelabel to all boards with USB support")
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This adds an example application for the TI INA219 Zero-Drift,
Bidirectional Current/Power Monitor with I2C Interface
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
This adds support for the TI INA219 Zero-Drift, Bidirectional
Current/Power Monitor with I2C Interface
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
This commit adds support for the Legend 3.5" board revision.
This board revision is found on the Seagate FireCuda Gaming
Hub and Gaming Drive Hub for Xbox devices. It contains the following
hardware components:
- A B1414 LED strip connected to the PA7 pin (SPI MOSI)
- A SPI flash (FM25F005) connected on SPI2 bus
- A PWM LED connected on TIM3 CH3
- An external 24 MHz oscillator
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
This commit adds support for the Legend 2.5" boards (legend25_ssd and
legend25_hdd) based on the STM32F070CB MCU. These boards can be found in
the Seagate FireCuda Gaming Drive, Gaming Drive for Xbox, SSD Gaming
Drive for Xbox, and Gaming Drive for PlayStation devices. Both boards
contain the following hardware components:
- A B1414 LED strip connected to the PA7 pin (SPI MOSI)
- A SPI flash (FM25F005) connected on SPI2 bus
The Legend 2.5" HDD board also contains an activity LED connected on
TIM3 CH3
Signed-off-by: Maxime Bittan <maxime.bittan@seagate.com>
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
