This header file declares the functions that rely on `bluetooth/conn.h`.
This collects `testlib/connect.h`, `conn_ref.h` and `conn_wait.h` into one.
Initial documentation for the functions in this file is also added.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
The Private Beacon Client API requires a response argument to allow to
call the API in the asynchronous manner
(https://github.com/zephyrproject-rtos/zephyr/pull/56426).
Because the removal of the EXPERIMENTAL tag for this API was not
released yet, it should be OK to change this API.
The EXPERIMENTAL tag has been removed here:
https://github.com/zephyrproject-rtos/zephyr/pull/64866
Coverity-CID: 330039
Coverity-CID: 330029
Coverity-CID: 329977
Fixes#65336Fixes#65338Fixes#65354
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
the reason is that the Mesh Profile clearly stipulates that Mesh nodes
cannot change their own element definitions.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Since model struct most of member should not change at run time,
so mark as const will be suitable and safely.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
This is to increase probability of reception of responses (Config Status
messages) from the node when the provisioner sends a Set message and the
node response with a Status message at the same time so that the message
collide.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Add implementation to reduce CIG's CIS retransmissions so as
to meet the Host requested Maximum Transport Latency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added a new configuration to the BabbleSim Bluetooth Peripheral Privacy
test to cover the code path for the RPA sharing mode.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Added a Kconfig option that makes the RPA sharing feature optional. By
default, the Zephyr Bluetooth stack now uses the RPA rotation policy
that was active before the introduction of the RPA sharing functionality
in the following PR:
https://github.com/zephyrproject-rtos/zephyr/pull/55449
The new Kconfig option configures the advertising sets linked with the
same Bluetooth identity to use the same Resolvable Private Address in
a given rotation period. After the RPA timeout, the new RPA is
generated and shared between the advertising sets in the subsequent
rotation period.
When this option is disabled, the generated RPAs of the advertising
sets differ from each other in a given rotation period.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This adds tests for automatic security elevation and retry on security
errors. This includes two tests:
1. where the security is elevated by the central
2. the security is elevated by security request, so pairing is already
in progress.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Removed the tests for invalid bt_bap_broadcast_source_get_base
parameters and state, as those tests now implemented as unit tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removed the tests for invalid bt_bap_broadcast_source_get_id
parameters and state, as those tests now implemented as unit tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
PR allows to get rid of tinycrypt objects from
the final binary of the ble mesh apps based on
PSA TFM crypto.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Modified the BabbleSim test for the Bluetooth test under the
host/privacy/peripheral category. Added the RPA check in the scan
callback context of the scanning tester device to validate if the
DUT advertising address is correct.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Extended the scope of the BabbleSim test for the Bluetooth test under
the host/privacy/peripheral category. The tests ensures correct RPA
advertising after the system a reboot when the Bluetooth identities
are preloaded from the Settings subsystem.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This is the first patch with the goal of establishing a common library
for Bluetooth utilities that are commonly used for setup in Bluetooth
Host tests. The ultimate goal is to remove redundant (near) copies of
these utilities and other more ad-hoc solutions.
This patch moves one instance of testlib (from
tests/bsim/bluetooth/host/att/long_read) to
tests/bluetooth/common/testlib and makes it a proper CMake library.
The long_read test is updated to link to the new CMake library.
Further changes and de-duplication will come in later patches.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Added an additional check before failing a BSIM test
on ISO error, so that when we stop the broadcast source
(after the sink have received the expected data), lost data
does not trigger a test failure.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add an initial test based on the broadcast audio source/sink samples
which runs them together and after waiting for a predefined
amount of time, checks how many audio packets has the
sink received, and if over a threshold, passes the test.
This test can be expanded after to cover more functionality from
these samples.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update the BAP broadcast tests to use the BSIM sync API
instead of sleeps, to ensure that everything is sent
and receive correctly, regardless of timing.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a test based on the unicase client/server samples
which runs them together and after waiting for a predefined
amount of time, checks how many audio packets has the
client received, and if over a threshold, passes the test.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The existing driver and sample:
- drivers/bluetooth/hci/rpmsg
- samples/bluetooth/hci_rpmsg
are no longer correctly named, since they now use the IPC subsystem to
send and receive data. The IPC subsystem can use RPMsg as a transport,
but that is one of several selectable backends.
I initially wanted to deprecated both the BT_RPMSG Kconfig option as
well as the zephyr,bt-hci-rpmsg-ipc chosen node in Devicetree. However,
this proved to be undoable in the case of the Kconfig option. This is
because it's a choice option, and those have special behavior. In
particular, the only practical way to deprecate would've been to keep
the old Kconfig option outside the choice (much like it's done in this
commit) but then also add a 'depends on !BT_RPMSG' on each of the
remaining choice symbols *except* on the new BT_HCI_IPC one. This, however,
only works correctly for .conf files. If a board instead sets the
default BT_HCI_BUS_TYPE in the Kconfig.defconfig file then the Kconfig
tree parsing would fail, because it'd try to set it to a value
(BT_RPMSG) that is no longer part of the choice.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The test was printing one line for each packet it was sending
by default. That creates a huge log and slows things down.
Instead, let's only print those with verbosity set at 4 or higher.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Also run some split BT stack tests on the nrf5340 platform
to test this configuration.
Move the selection of which BT tests are built and run
in each platform to files in the tests/bsim/ folder.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add sysbuild build files, which allows building this test
both for the targets we could already before
(nrf52_bsim & nrf5340bsim_nrf5340_cpunet)
and also adds support for the a split build with the
nrf5340bsim_nrf5340_cpuapp.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add sysbuild build files, which allows building this test
both for the targets we could already before
(nrf52_bsim & nrf5340bsim_nrf5340_cpunet)
and also adds support for the a split build with the
nrf5340bsim_nrf5340_cpuapp.
Note that when doing a split build the controller is
taken from the hci_rpmsg BT sample, and therefore the
controller configuration in this folder is not used.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test was reusing the sim_id from an l2cap test,
which was colliding with the corresponding l2cap test
when they were run in parallel.
Fix it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Use the HCI layer to update the channel map instead of calling directly
into the controller.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/64441
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The BT Core Spec v5.4 allows separate SDU_Interval to
be set on C_To_P and P_To_C directions,
but this is not possible with the existing interface.
This PR splits the interval parameter in the call to
bt_iso_sig_create into one for C_To_P
and one for P_To_C
It also splits the latency parameter into one for
C_To_P and one for P_To_C
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Bluetooth: ISO: update UI for extended API
The API for setting the SDU interval and latency have been updated.
This PR also updates the setting of these by the user in the shell
and the iso_connected_benchmark sample
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
When EATT is established, the value returned from `bt_att_get_mtu` is
not useful to determine the ATT_MTU that applies to a ATT response. This
is because `bt_att_get_mtu` may return the value for a different bearer
than the request is serviced on.
To fix this, the params struct for the GATT read operation is given a
new field that will record the ATT_MTU that applies to this ATT
operation. This value is then used to determine if the GATT long read
operation is concluded.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/61741
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
The test is currently broken in main and blocking
all other development when triggered.
Let's disable it by now as a provisional measure.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Adds coexistence Bsim test for Opcode Aggregator models using loopback.
The test verifies that the Opcode Aggregator server and client can send
messages to each other on the loopback interface.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Adds coexistence Bsim test for Opcode Aggregator models.
The test verifies that the Opcode Aggregator server and client can be
present and functional when operating on the same device.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Add a test for the broadcast sink that uses the BAP
Scan Delegator functionality with a Broadcast Assistant
device adding the broadcast source.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds Bsim test that verifies private beacon cache functionality.
The test checks that replays of the same private beacon
message is discarded.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Adds Bsim test that verifies SNB cache functionality.
The test checks that replays of the same SNB
message is discarded.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Validates that nothing nefarious happens if the application decides to
wait an arbitrary amount of time in notification callbacks.
Also validates that a disconnection during said waiting works as
expected.
E.g. in #48505, the user was trying to send data synchronously over UART
_inside_ the notification callback. Then the device was disconnected
whilst still waiting.
This kind of pattern is not recommended, but the stack should still
function correctly, stalling the "BT RX" thread shouldn't result in
state corruption or resource leakage.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
When the initiator provides CCID in the metadata, we verify
that the CCIDs exist on the device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update the BSIM test and the shell to use
bt_audio_codec_cfg_set_chan_allocation rather than implementing
their own versions.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The BAP unicast babblesim tests now does RX and TX
and verifies that the data is correctly received on both
the client and server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add validation of sending and receiving dummy data.
Previously, due to a bug, we actually never sent any data
and still passed the test.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This is to increase probability of reception of responses (Config Status
messages) from the node when the provisioner sends a Set message and the
node response with a Status message at the same time so that the message
collide.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Since notice that simultaneous advertising is not only used
by relay message, provision over pb-adv can also be used.
so it was changed to a more general name.
refs:https://github.com/zephyrproject-rtos/zephyr/pull/48903
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Verify that a HAS Server IUT sends changed characteristic notifications
or indications when the Lower Tester reconnects.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
