Replace LL_EXTENSION_SYMBOL() with EXPORT_SYMBOL() in all tests and
samples.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
If CONFIG_LOG_BACKEND_SHOW_COLOR is disabled, error and warning
lines are still being outputted with color, which is contrary to
what the Kconfig says. So change the color settings for error
and warning lines to no color if this Kconfig is disabled.
The log_output test is also amended to account for this.
Though the test is not skipped as no color is still some colors
(... well... maybe).
Fixes#77150
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Several BSIM tests did not enable -RealEncryption=1.
Since everything in LE Audio effectively requires encryption,
we should enable it, as we have seen a few tests passing before
that shouldn't, because they didn't set -RealEncryption=1.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Enable central HR peripheral HR samples for nrf54l15bsim.
RealEncryption is BabbleSIM is not enabled as nRF54L port
in Zephyr Controller is not yet supported and the test is
also not using security (SMP pairing).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a babblesim test for testing the behavior when providing
an invalid broadcast code as the broadcast sink.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Connect D12(PA6) & D22(PB5) pins on the board to pass the test.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Reviewed-by: Vasilij Strassheim <vasilij.strassheim@linutronix.de>
The board is capable to serve SPI on the Arduino extention header.
Configure and enable SPI to work on the extention.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
The nucleo_h7X3zi overlays use memory attributes and therfore the
dedicated include file. This is unnessesary, since the memory attribute
include is already included from the underlaying CPU base file
"stm32h7.dtsi". Remove the unnessesary includes.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Test that SQE's created with `rtio_sqe_prep_callback_no_cqe` run, but
don't create a completion queue event.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Due to issues with running the watchdog test in a fully
automated manner on the IT8XXX2_EVB, it was previously removed.
However, a fix has now been merged, and it should be operational
on this board once again.
Signed-off-by: Patryk Kuniecki <patryk.kuniecki@intel.com>
Some hardware configuration require rely on the ALERT/RDY
pin to know when and ADC conversion is completed.
The polling thread is left as fallback, when the pin
is not defined.
Signed-off-by: Efrain Calderon <efrain.calderon.estrada@gmail.com>
Add a new macro, DT_ANY_COMPAT_HAS_PROP_STATUS_OKAY
name, evaluates to 1 if any enabled instance of `compat` has the
property or to zero if it hasn't.
This macro can be useful in drivers for a family of devices.
Signed-off-by: Efrain Calderon <efrain.calderon.estrada@gmail.com>
Commit consists of minimal set of overlays need to run tests
and samples. Additionally disables nRF54L15 platform in cpp98
tests, because unnamed unions are not supported.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Added volume offset for CAP commander
Added gain settings for CAP commander
Added play, pause and seeking for MCS
Added program_info and metadata update for PBP
Added long read and notify for all TBS characteristics
Added TMAP CG
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This transforms the existing driver for the Microchip MCP9808
to be used as a generic driver to be used with all
JEDEC JC 42.4 compliant temperature sensor chips.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
pwm: pwm_api: update testcase.yaml and add new overlay configuration
to support flexio pwm driver.
spi: spi_loopback: update testcase.yaml and add new overlay
configuration to support flexio spi driver.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
This adds the bits to test the displaying the usage of
privileged stacks for user threads. Note that this only
adds the printk part as this is to test the code path to
fetch usage data rather than the display part.
Also add qemu_xtensa/dc233c/mmu to platform allow list so
the privileged stack code can be tested on that platform.
This replaces mps2/an385 with qemu_x86 as an integration
platform due to the privileged stack test. Since ARM does
not currently support getting privileged stack info, test
would result in twister error due to kconfig warnings.
The board cannot be excluded since it's an integration
platform. So for now, use qemu_x86 as an integration for
32-bit testing. Once ARM has proper support, we can go
back to having mps2/an385 as an integration platform.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This disables QEMU icount for all the simulated platforms
in the allowed list. With icount enabled, the printout from
the thread analyzer would be continuous and non-stop instead
of the default once every 60 seconds. Besides, the console
harness only needs one, and these is no need to waste CPU
cycles and memory for processing the extra ones.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Update `shell_backend_uart` to take into account the new line print by
`z_cursor_next_line_move`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Instead of using filter (which is expensive in terms of CI as
it needs to run cmake on everything to get the full kconfigs
before filtering can be done), change that to a curated list
of allowed platforms. This avoids the expensive filtering
operation, yet can still run on some emulated platforms to
verify the dictionary output.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Before commit baa70d8d36 ("arch/arm64/mmu: fix page table reference
counting part 2") it was possible to perform a partial unmap of a block
mapping. Restore that ability and provide a test case to validate it.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Since testing.c/h was moved to mesh, all functions and
structs in those files now follow a bt_mesh_test_*
naming scheme to be consistent with the naming in Zephyr.
Due to missing includes in many files, this commit also
added some that were missing in order to build since
the order of includes have changed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The file is only ever used by mesh and it is even stated in the
header of the file that it is internal APIs.
The include file has been merged with the host testing.h file
as that was mesh specific as well. Similarly the testing.c
file was also moved
This is part of a process to clean up the file structure of
Bluetooth as it's a bit messy, which is evident from the
MAINTAINERS.yml file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit excludes the `m2gl025_miv` platform from running the
`kernel.common.stack_sentinel` test. It experiences the same issue as
`hifive1`, which was described in issue #66070.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Exclude RW612 based boards from the WiFi testsuite, as these boards
require binary blobs be downloaded in order to build as expected
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
