Convert the hci_stm32wba.c driver to the new HCI API. Unlike in most cases,
the devicetree node is already enabled on the SoC level (rather than board
level). This is in order to mirror how the Kconfig option was originally
enabled, i.e. on the SoC level.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
The drivers should be independent after the move to the new HCI driver
API. Having them as a choice also has unexpected consequences with some
drivers being unexpectedly enabled.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Convert the H4 driver to the new HCI driver API. This includes updating
also any boards that use the driver, i.e. adding the appropriate
devicetree node and chosen property to them.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Some vendor specific setup was done inside
the open() HCI function, those should be
inside setup() function instead.
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
The driver isn't currently buildable due to "west blobs" support never
having been added for hal_telink. Furthermore, even if the blob
dependency is manually made available it turns out the code has
bitrotten to the point where it doesn't build anymore. This situation
has continued for several years without anyone taking action, so I think
it's safe to assume this is unmaintained and should be removed.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
This commit add the SPI-based HCI support for the Ambiq Apollo3 Blue
SOC (e.g. Apollo3 Blue Plus, Apollo3 Blue) support.
Also correct the dependency of necessary peripheral.
Signed-off-by: Aaron Ye <aye@ambiq.com>
Add HCI driver generic to NXP platforms.
Update west.yml to have ble support for rw61x
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
This adds HCI driver which enables communication with CMAC core on
Renesas SmartBond DA1469x series. The CMAC core is running an Apache
NimBLE controller binary and uses shared memory for communcation via
mailboxes.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This commits create the dts binding for Ambiq BT HCI instance.
And create the SPI based common HCI driver for Ambiq Apollox
Blue SoC and the extended soc driver for HCI.
Signed-off-by: Aaron Ye <aye@ambiq.com>
Remove BT_SPI_BLUENRG Kconfig parameter as it is redundant according to
the new changes introduced by ST SPI protocol V1 and V2.
Remove "config BT_SPI_BLUENRG" from the boards that were using it.
Signed-off-by: Ali Hozhabri <ali.hozhabri@st.com>
The zephyr bluetooth stack expects the controller to know its public
address, if any. At least for BlueNRG, the public address is forgotten with
every reset/power cycle, so there needs to be a way to set it from within
zephyr. This is accomplished using the `Aci_Hal_Write_Config_Data` HCI
command, as described in PM0237.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
This allows HCI drivers to expose vendor-specific functions to set the
public address.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Increase the SPI RX driver stack size by 128 bytes. Overflows have
previously been observed on real hardware at the default stack size of
512.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The existing driver and sample:
- drivers/bluetooth/hci/rpmsg
- samples/bluetooth/hci_rpmsg
are no longer correctly named, since they now use the IPC subsystem to
send and receive data. The IPC subsystem can use RPMsg as a transport,
but that is one of several selectable backends.
I initially wanted to deprecated both the BT_RPMSG Kconfig option as
well as the zephyr,bt-hci-rpmsg-ipc chosen node in Devicetree. However,
this proved to be undoable in the case of the Kconfig option. This is
because it's a choice option, and those have special behavior. In
particular, the only practical way to deprecate would've been to keep
the old Kconfig option outside the choice (much like it's done in this
commit) but then also add a 'depends on !BT_RPMSG' on each of the
remaining choice symbols *except* on the new BT_HCI_IPC one. This, however,
only works correctly for .conf files. If a board instead sets the
default BT_HCI_BUS_TYPE in the Kconfig.defconfig file then the Kconfig
tree parsing would fail, because it'd try to set it to a value
(BT_RPMSG) that is no longer part of the choice.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Enable backends by default, instead of requiring some other module to
turn them on. This aligns with the behaviour of sensor drivers and
`BT_RPMSG`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Be explicit about the HCI backend that Bluetooth unit tests require.
Some unit tests depend on `BT_HAS_HCI_VS`, so also enable that.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Currently on zephyr, RAIL is used only for bluetooth. RAIL library is
needed to use efr32 radio regardless of the protocol used. We add
SOC_GECKO_USE_RAIL kconfig option to indicate if we use radio.
FPU is needed when using RAIL, we configure it if SOC_GECKO_USE_RAIL
is set.
Signed-off-by: Antoine Bout <antoine.bout@silabs.com>
This commit enabled the Silicon Labs Bluetooth interface driver on the
EFR32BG27 SoC series in the Kconfig.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Using EM2 or deeper sleep states (where HF clocks are off) requires
special care if BLE radio is used, since BLE radio relies on that clock,
and its power/clock requirements need to be taken into account
On SiLabs, radio PM is implemented as part of RAIL blob, which relies
on sl_power_manager HAL service. I've implemented SoC PM
state changes using sl_power_manager instead of emlib, and added
call to RAIL PM initialization in Gecko HCI driver.
Signed-off-by: Roman Dobrodii <rdobrodii@antmicro.com>
This commit adds BLE support to the `efr32xg24_dk2601b` board. It also
modifies the SiLabs BT HCI driver to accomodate the EFR32xG24 SoC
series.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This commit adds the SiLabs Bluetooth HCI driver. It also enables this
BLE HCI driver on the efr32bg_sltb010a board.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Added initial version of Infineon cyw43xxx BT (
H4 HCI extension drivers/bluetooth/hci/CMakeLists.txt)
Add initial version of binding file for Infineon CYW43xx BT
HCI extension driver.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
This is necessary to prevent stack overflows when building with
non-standard configurations (e.g. CONFIG_DEBUG).
Adding them as hidden kconfig options to avoid the stuck kconfig syndrome.
Users are free to redefine them in their app to force a value.
The userchan.c driver is only built for posix, and the help text for
ARCH_POSIX_RECOMMENDED_STACK_SIZE states that the real stack comes from
somewhere else (the pthread stack), hence why it doesn't use the new
kconfig options.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add explicit selection of the BT_HAS_HCI_VS for
the BT_RPMSG HCI driver. When the HCI over RPMSG
is used this dependency will not be solved automatically.
It is required to handle correctly Bluetooth identity
initialization.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
Change CONFIG_BT_RECV_IS_RX_THREAD into a
choice:CONFIG_BT_RECV_CONTEXT with the following options
(names can be discussed further of course):
CONFIG_BT_RECV_BLOCKING
CONFIG_BT_RECV_WORKQ_BT
CONFIG_BT_RECV_WORKQ_SYS
This way users would be able to choose what to run most of
the BLE stack on, they wouldn't be forced to a single model.
We would default to CONFIG_BT_RECV_BLOCKING so that we wouldn't
need to change the system workqueue stack size by default, instead
asking users to do so if they select the CONFIG_BT_RECV_WORKQ_SYS option
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The purpose of this change is to allow to enable more than one
backend at once by removing choice from ipc-service backend Kconfig
and depending backend Kconfig option on existing of correct compatible.
Overwriting IPC_SERVICE_BACKEND option in some places is removes
as no longer needed.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The Bluetooth HCI driver based on the RPMsg transport now uses the IPC
service module. The compatible Bluetooth sample - HCI RPMsg - has also
been migrated to the new IPC solution.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
- Added config BT_HCI_SETUP to enable HCI vendor-specific Setup feature,
- Added pointer to 'setup' function in bt_hci_driver structure.
BT_HCI_SETUP feature is useful when the BT Controller requires execution
of the vendor-specific commands sequence to initialize the BT Controller
before the BT Host executes a Reset sequence. To enable this feature the
CONFIG_BT_HCI_SETUP should be enable.
Fixes#41140
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
With the introduction of `EXPERIMENTAL` and `WARN_EXPERIMENTAL` in
Zephyr all subsys/bluetooth and drivers/bluetooth/hci settings having
`[EXPERIMENTAL]` in their prompt has has been updated to include
`select EXPERIMENTAL` so that developers can enable warnings when
experimental features are enabled.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Follow up on commit bfd45e5b8c
("drivers: remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME")
Remove Kconfig options
CONFIG_BT_UART_ON_DEV_NAME and CONFIG_BT_MONITOR_ON_DEV_NAME
since all UART drivers are converted to devicetree and we can just use
DEVICE_DT_GET(DT_CHOSEN(zephyr_bt_uart)) and
DEVICE_DT_GET(DT_CHOSEN(zephyr_bt_mon_uart)).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This patch modifies Bluetooth HCI RPMsg drivers and samples to use
RPMsg Service instead of configuring OpenAMP directly in the driver
or the sample.
Co-authored-by: Piotr Szkotak <piotr.szkotak@nordicsemi.no>
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Add BT_QUIRK_NO_AUTO_DLE quirk option for HCI rpmsg driver
when the Zephyr open source BLE controller is used.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fixes#28275 by adding bluetooth HCI spi driver priority lower
(75 instead of 50) than SPI (70) to avoid device_get_binding
to return NULL because the device was not initialized.
Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>
