The Code need to be align after introduction of stream codec to
setting serialization subsystem.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
There is not an easy way to relate an application's user_data to a
connection. One way is to save a pointer to bt_conn in the
application's user_data array upon connection establishment.
Each connection related callback function will have to loop for all
user_data and compare the saved pointer to the passed bt_conn
pointer. This is inefficient if there are many callback activations
during the connection.
This change makes the internal bt_conn mapping function accessible to
applications in conn.h. The function name is changed to
bt_conn_index() to clearly indicate that the function returns an
index of an array.
Add an ASSERT to catch illegal parameter.
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
When removing a peer from a CCC, it also needs to be removed from
the attribute `cfg`.
Not removing it would create a shortage of `cfg` that could
prevent new host to pair to the BLE device.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
Accourding to Bluetooth specification the Service Changed
Characteristic shall not have its handle changed once it has been
bonded, so this moves the GATT service to be the very first service
registered that way it is guaranteed that it won't change even if
device is flashed with a different configuration which end up changing
the handles after it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some backends may actually contain the same key multiple times so the
code needs to check if there is already a ccc_cfg for an address before
attempting to use one that is unallocated.
Fixes#11409
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If there are no CCC to be stored the value should be set to NULL so it
is properly cleared otherwise calling settings_str_from_bytes will leave
str uninitialized which may cause a crash when attempting to load the
value.
Fixes#11564
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
By default, CCC value is only stored to persistent memory during
BT disconnection. This commit adds an optional storing of CCC right
after it has been updated. This results in better robustness of
peripheral but increases system workqueue stack usage.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
Under GNU C, sizeof(void) = 1. This commit merely makes it explicit u8.
Pointer arithmetics over void types is:
* A GNU C extension
* Not supported by Clang
* Illegal across all ISO C standards
See also: https://gcc.gnu.org/onlinedocs/gcc/Pointer-Arith.html
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
This allows to configure desired parameters for peripheral. When set
PPCP characteristic is also added to GAP service. If disabled it is
up to application to controll connection parameters and stack will
only enforce 5 seconds delay before update.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This fix ensures that the handle range used for next GATT discovery is
always inclusive. Previously, the discovery procedure could not be
started with equal value of start and end handle.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This makes bt_gatt_discover perform discover all proceduce if no UUID
is given in the parameters.
Fixes#9713
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
None of the data for the CEP, CUD and CPF descriptors needs to be
modified by the stack at runtime. Make it possible to pass constant
data to the descriptor macros, and make sure the descriptor handlers
cast the data back to be a constant.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This changed added notification complete callback which
gives information if a given notification has been sent.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
This adds Central Address Resolution characteristic that is required
to check by peer if it's about to send directed advertisements where
initiator address is set to RPA.
Zephyr supports the Address Resolution, so the characteristic value
is hard-coded.
Please check Core 5.0 Vol 3 Part C 12.4 CENTRAL ADDRESS RESOLUTION
Related PTS test case: GAP/CONN/ACEP/BV-03-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This ensures the core services are always registered first and the
gatt_sc work is initialized.
Fixes#9785
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If cfg_changed has not been set consider that the application don't
care and just skip it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make it possible to have multiple identity addresses as an LE
peripheral. For central role only the default identity is supported
for now. This also extends the flash storage in a backward compatible
way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes GAP name writable if CONFIG_BT_DEVICE_NAME_STORAGE is > 0
which means the name can be persisted.
Fixes#8357
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds an Kconfig option to disable GATT Multiple Read support.
This GATT sub-procedure is optional and does not have to be supported.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes invalid assert condition.
As stated in Bluetooth Core v5.0 Vol 3 Part F
3.4.4.1 Read By Type Request &&
3.4.4.9 Read by Group Type Request
"The starting handle shall be less than or equal to the
ending handle."
3.4.3.1 Find Information Request &&
3.4.3.3 Find By Type Value Request
"Only attributes with attribute handles between and
including the Starting Handle parameter and the Ending
Handle parameter that match the requested attribute type
and the attribute value that have sufficient permissions
to allow reading will be returned."
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Recent commits which made the choice of attribute to pass to
bt_gatt_notify() more flexible contained some unfortunate bugs in
handling the attributes and their values. In particular, both calls to
gatt_notify() would in certain circumstances pass the wrong handle
value. This should now be fixed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since BT_GATT_CHARACTERISTIC now expands to 2 attributes it may be
confusing to use bt_gatt_indicate as that expects the Value attribute to
be given which is no longer visible, so this enables the user to use
the Characteristic attribute in addition to its value.
Fixes#8231
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since BT_GATT_CHARACTERISTIC now expands to 2 attributes it may be
confusing to use bt_gatt_notify as that expects the Value attribute to
be given which is no longer visible, so this enables the user to use
the Characteristic attribute in addition to its value.
Fixes#8231
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This ensures the every characteristic has a value attribute declared
with the same UUID since the old macro did not declare the value the
application would normally have to declare one itself using a different
UUID which is not allowed.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The 'valid' member of struct bt_gatt_ccc_cfg was redundant, since
setting 'peer' to BT_ADDR_LE_ANY does the same job. What's worse, the
handling of 'valid' was also buggy in that some places looking for
valid CCC structs only matched the address, meaning it might yield a
positive match for invalid entries.
Fix these issues by removing the 'valid' struct member, and solely
using the 'peer' member to identify valid entries. Also simplify the
code by acknowledging that no CCC entry is essentially the same as the
value '0' written to CCC.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When reconnecting the code will attempt to recover the subscriptions
but it was not setting any callback causing the bt_att_req.func to be
NULL.
Fixes#5982
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Application should normally declare a bt_uuid with proper type and then
use bt_uuid_cmp.
Fixes#5162
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If peer has previously configure to received service changes indications
any changes to the database during the time it has been disconnected
shall be indicated once it reconnects:
[bt] [DBG] sc_process: (0x004065b4) start 0x000a end 0x0014
[bt] [DBG] sc_save: (0x004065b4) peer b8:8a:60:d8:17:d7 (public)
start 0x000a end 0x0014
[bt] [DBG] bt_gatt_connected: (0x00405240) conn 0x00405aa0
[bt] [DBG] gatt_ccc_changed: (0x00405240) ccc 0x00400b30 value 0x0002
[bt] [DBG] sc_ccc_cfg_changed: (0x00405240) value 0x0002
[bt] [DBG] sc_restore: (0x00405240) peer b8:8a:60:d8:17:d7 (public)
start 0x000a end 0x0014
[bt] [DBG] sc_process: (0x004065b4) start 0x000a end 0x0014
[bt] [DBG] gatt_indicate: (0x004065b4) conn 0x00405aa0 handle 0x0008
[bt] [DBG] sc_indicate_rsp: (0x00405240) err 0x00
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_gatt_indicate return 0 in case of success, not true, so
SC_INDICATE_PENDING was flag was not set when it should.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There could be situations where many services are changed in a row which
would cause k_sem_take to block on the second change, but if the calling
thread is actually the RX thread then this will deadlock since the RX
thread is the one processing the confirmations of indications and it is
blocked k_sem_give is never called.
To solve this the services changes are now offloaded to the system wq
and the code will attempt to consolidate the range being changed so only
one indication is send. If for some reason another changes is caused
while confirmation is pending we just reschedule it to run later to
avoid blocking the system wq in the same way.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Upcoming memory protection features will be placing some additional
constraints on kernel objects:
- They need to reside in memory owned by the kernel and not the
application
- Certain kernel object validation schemes will require some run-time
initialization of all kernel objects before they can be used.
Per Ben these initializer macros were never intended to be public. It is
not forbidden to use them, but doing so requires care: the memory being
initialized must reside in kernel space, and extra runtime
initialization steps may need to be peformed before they are fully
usable as kernel objects. In particular, kernel subsystems or drivers
whose objects are already in kernel memory may still need to use these
macros if they define kernel objects as members of a larger data
structure.
It is intended that application developers instead use the
K_<object>_DEFINE macros, which will automatically put the object in the
right memory and add them to a section which can be iterated over at
boot to complete initiailization.
There was no K_WORK_DEFINE() macro for creating struct k_work objects,
this is now added.
k_poll_event and k_poll_signal are intended to be instatiated from
application memory and have not been changed.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The worst-case maximum number of CCC entries we need is actually
MAX_CONN + MAX_PAIRED. Provide a helper define for it and use it
whenever appropriate.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Rename bt_gatt_unregister_service to bt_gatt_service_unregister to be
consistent with other APIs such as bt_gatt_service_register.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With the introduction of Service Changed support it is now possible to
unregister services at runtime.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds bt_gatt_register_service using bt_gatt_service which contains
the attribute array that is then added to the database saving a pointer
in each and every attribute declared.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
GATT is mandatory service and now that the db can only be build
dynamically there is no reason to keep the applications registering it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
GAP is mandatory service and now that the db can only be build
dynamically there is no reason to keep the applications registering it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Removes CONFIG_BLUETOOTH_GATT_DYNAMIC_DB in preparation to the
introduction of bt_gatt_unregister.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In order to properly queue request there need to be a bt_att_req
storage but none of the calls to gatt_write_ccc were using the params
causing gatt_send to use bt_att_send and not bt_att_req_send.
To fix this now all the callers of gatt_write_ccc do set the params
properly but this means that bt_gatt_unsubscribe has to wait for it
to be completed before the application can reuse the
bt_gatt_subscribe_params.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since more and more code is going to be reused by both the Host and the
Controller, this commit introduces a common/ folder that will contain
everything that is not tied to one of the two components but shared by
them.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix the attr->handler reference to attr->handle.
Change-Id: I4a6ccee7860abf800f51df404979eac18eb26e8e
Signed-off-by: Michael Scott <michael.scott@linaro.org>
