Any value passed to a function in <ctype.h> shall be
representable as an unsigned char or be the value EOF.
So changed type of variable to unsigned char.
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
Uses of k_work_pending are to be replaced by k_work_is_pending which
conforms to current proposed naming guidelines.
Switch to the new function.
Also initialize the private work structure at build time, rather than
on each iteration (it is not permitted to invoke work API on an
uninitialized work item).
The implementation here is racy: that a work item is pending does not
mean changes since it was first submitted are guaranteed to be seen
when the work item begins (began) executing.
A better solution would be to have transmit_message be able to
determine whether there is unprocessed work. Then the work item can
be submitted unconditionally.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Uses of k_work_pending are to be replaced by k_work_is_pending which
conforms to current proposed naming guidelines.
Both uses in this file are fragile: that a work item is pending does
not mean changes since it was first submitted are guaranteed to be
seen when the work item begins (began) executing.
As long as this module is expected to be replaced by tcp2 it doesn't
seem worth trying to fix the logic, so just switch to the new function
name.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Checking whether a work item is pending before submitting it is racy:
the item may be finishing up in its handler, and essentially
completed, in which case chosing not to resubmit would leave work
unhandled.
In this case it appears very wrong, since the sole call site in
net_if.c has just initialized the work item, which is not permitted if
the work item is pending.
Remove the check.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add Thalley (emil.gydesen@nordicsemi.no) and asbjornsabo
(asbjorn.sabo@nordicsemi.no) as additional maintainers/codeowners for
bluetooth audio.
(Also adds empty audio.h file, that will later be expanded, so that
the include/bluetooth/audio directory now listed in CODEOWNERS
actually exists.)
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Improve dynamic interrupt test cases of interrupt for platform such as
x86, x86_64, native_posix, this improve code coverage of it.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Enable the CONFIG_TEST switch in the test suite.
This allows certain required Kconfig settings for
ARM Cortex-M (which depend on TEST) to be enabled
when executing the test suite.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The compiler generates a warning regarding a variable being used
w/o being initialized in certian configuration. According to the logic
that's not the case, so just add some initial value to the variable to
silence the compiler.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As network interface array size might be larger than the actual
network interface count, check this condition and ignore those
interfaces that are not in use.
We cannot know for certain how many network interfaces there
are at built time, as the total count is only available at runtime.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The network interface index is very useful info to see in
debug prints so add those to debug output.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
While I'm in the idle code, let's clean this loop up. It was a really
bad #ifdef hell:
* Remove the CONFIG_TICKLESS_IDLE_THRESH logic (and the kconfig),
which never did anything but needlessly increase latency.
* Move the needed timeout logic from the main loop into
pm_save_idle(), which eliminates the special case for
!SYS_CLOCK_EXISTS.
Behavior (modulo that one kconfig) should be completely unchanged, and
now the inner part of the idle loop looks like:
while (true) {
(void) arch_irq_lock();
if (IS_ENABLED(CONFIG_PM)) {
pm_save_idle();
} else {
k_cpu_idle();
}
}
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This kconfig isn't actually exercised in this test, it's just being
used to compute some sleep durations. Also I want it gone.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The removal of the abort handling also absconded with an IRQ lock that
is required for reliable operation in the idle loop. Put it back.
Once the idle loop has made a decision to enter idle, any interrupt
that arrives needs to be masked and delivered AFTER the system enters
idle. Otherwise we run the risk of races where the system accepts and
processes an interrupt that should have prevented idle, but then goes
to sleep anyway having already made the decision.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
CPython is sometimes described as "single threaded" due to the GIL,
but the interpreter will still "preemptively" switch between threads
(the details seem poorly documented).
So the time between checking whether acquire is 1 and decrementing the
count could result in more than one thread seeing an "available"
device, and more than one test being run (simultaneously, on the same
physical device!). We have a big herd of threads all polling for
this, so in a large test run this would happen maybe one time out of
20-30 tries.
Use a lock. Also remove the very similar looking
DUT.get_available_device() method, which had the same bug but appears
to be dead code.
Fixes#32679
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This patch adds weak sys_arch_reboot() function to avoid build error
with CONFIG_REBOOT=y. Some SoC has already had own reboot function
but others (Ex. qemu boards) faced buld error.
- openisa_rv32m1: Not change
- riscv-ite: Do nothing, remove and use arch/riscv function
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Instead of hardcoding the network interface value, use
net_if_ipv6_select_src_iface() so that proper network interface
gets used.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are sending a network packet and if the remote address
is not set in the context (which means that connect() has not
been called), then we must set the target network interface
to a proper value.
This is done so that when we select the local source address,
we might select the wrong interface if we have multiple network
interfaces in the system. In this case the packet would be always
assigned to first network interface regardless of the destination
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove unnecessary main stack configuration in bluetooth samples.
The HCI power control sample does not need to set the main stack this
low, and setting it causes restriction on what the application can
change in menuconfig. A change in the entropy driver causes stack
overflow.
The HCI uart sample sets the main stack to the default size.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
If files are changed for architecture code, then only run CI on those
architectures.
Combine all scripts into one and make it simpler.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Improve default logging strdup buffer count and size.
The maximum string logged with Bluetooth is a 32-byte key in hex.
The strdup buffer is empty too often.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Log the security keys that the sniffer needs in order to sucessfully
decrypt the connection.
This option allows the sniffer to work in the cases where enabling
using the SMP debug keys is not wanted, either because it changes the
way the peer behaves or is denied by the peer.
It also enables the sniffer to decrypt a connection where the bond
already exists.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add a name to the h4 rx thread.
It's useful to put a name on each thread for debugging, e.g., with the
shell's kernel threads command.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Convert allowed_cmds to an array of atomic_t of size 1.
This makes it future proof in case more commands are added.
Possibly silences coverity false positives on array vs singleton usage.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix some format warning in cfg_cli.c.
Fix use CID_VNAL as param when use vendor models.
This is a resubmission of PR (#30086)
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Fixed some undesired or incorrect macros, which
can cause build error.
This is a resubmission of PR (#30086)
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Correct format errors, such as oob action 2-octers
should use 0x%04x, and action in prov capalilities pdu
big-ending. When every call `bt_mesh_auth_method_set<*>`
should also clear auth value, otherwise will case confirm
failed.
Provisioner role expect peer public key should be sent
immediately, instead of requiring ACK. After all, ACK may
be lost, and the other device’s public key will be sent
over, and provisioning procedure will be failed..
This is a resubmission of PR (#30086)
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Zero initialize the ch_handle in dma_pl330_configure().
The memset in dma_pl330_config_channel()is incorrect,
as the ch_handle is already populated with valid values and
the dma_pl330_config_channel() is overwriting with zeros.
Signed-off-by: Arjun Jyothi <arjun.jyothi@broadcom.com>
This sets the dts of dma for using the uart asynch api.
The stm32l475 has a dmamux with request 2 for Tx/Rx usart4
The Tx&Rx pins (PA0, PA1) of the usart4 are connected
on the disco_l475_iot1 board to pass the test.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
To remove the need of empty config files, the `board_check_revision()`
now accepts a list of valid revisions.
As example:
```
board_check_revision(
FORMAT MAJOR.MINOR.PATCH
VALID_REVISIONS 0.1.0 0.5.0 0.10.0
)
```
The code is still compatible with the `<board>_<revision>.conf` changes
so that if different revisions of a board has Kconfig differences, then
there is no need to also specify the list of valid revisions.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
AArch64 has support for PSCI. This is especially useful for SMP because
PSCI is used to power on the secordary cores.
When the PSCI driver was introduced in Zephyr it was designed to rely on
a very PSCI-centric subsystem / interface.
There are two kinds of problems with this choice:
1. PSCI is only defined for the non-secure world and it is designed to
boot CPU cores into non-secure state (that means that PSCI is only
supposed to work if Zephyr is running in non-secure state)
2. There can be other ways or standards used to start / stop a core
different from PSCI
This patch is trying to fix the original wrong assumption by making the
interface / subsystem a generic one, called 'pm_cpu_ops', and using PSCI
only as an actual driver that is a user of this new interface /
subsystem.
For now the new subsystem is only exposing two methods: cpu_on and
cpu_off, others will probably follow according to the needs.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
There is no strict reason to use assembly for the reset routine. Move as
much code as possible to C code using the proper helpers.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Introduce C helpers for common assembly operations and preprocessor
constructors to create helper functions to read / write system
registers.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The name for registers and bit-field in the cpu.h file is incoherent and
messy. Refactor the whole file using the proper suffixes for bits,
shifts and masks.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The Semtech SX1272MB2DAS shield is populated with a SX1272 LoRa
transceiver. The base board must provide Arduino header pins
definitions.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
The cmd_write and cmd_ctunc have been opening/creating file for
read/write operation.
The commit changes cmd_write to open/create file for write only,
and cmd_trunc to only open file for write.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
