Adds, removes and modifies includes in all LE audio
files.
Fixes any found spelling mistakes as well.
Fixes a few places where incorrect types were used.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The LE Audio implementations do not really support bonding yet,
and removing subs on disconnect is the most effective (and correct)
way of ensuring that we do not subscribe more than once when we
re-discover after reconnection.
The broadcast assistant and the media control client does not
support multiple connections as of this commit, so they needed
special treatment. In the case that we do discovery on multiple
ACL connections, it is important that the existing subscriptions
are removed correctly by calling bt_gatt_unsubscribe.
In order to implement this change properly on some of the clients,
thet had no proper connection references or support
for clearing the data on disconnects, they had to be updated
as well.
The csip_notify.sh test has been disabled, as that expected a
notification in the client, but since this commit removes that
(until bonding is properly supported in the clients), then the
test will fail.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Several places the LE Audio clients called bt_gatt_subscribe without
checking the return value, which could cause some issues in the worst
case, and in the best case, cause some unexpected behavior.
Some implementations had a bit more updating to handle the new
behavior.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This removes duplicated code by adding helper functions to allocate
and free bt_tbs_call objects.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Why?
- metadata is easier to manage as an array + index
- less error-prone -> less memory-management bugs
- we can. because of the previous refactor
- PDU allocations are more predictable
- ATT buffer size can be optimized by app
- isolates ATT from the rest of the ACL users
- decouples ATT PDU size from e.g. SMP w/ LESC
Drawbacks:
- higher memory usage
- kconfig change
The higher memory use is only temporary, as this will be followed-up
with more refactors that should bring it back down.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Co-authored-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This fixes missing Fix bt_tbs_client_cb.discover call that has been
observed when CONFIG_BT_TBS_CLIENT_CCID was disabled. In such case the
discovery proces was not finished from application point of view,
as the callback was not called.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This removes odd `subscribe` parameter from bt_tbs_client_discover
function parameters list. As the API user enables specific
CONFIG_BT_TBS_CLIENT_* option, the client implementation should
subscribe to the characteristic notifications so that the user receives
the value updates.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
In discover_next_instance coverity did not consider the
ASSERT and warns about possibly dereferecing current_inst
which could be NULL. Modifed the code slightly to make
Coverity happy.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This intoduces dedicated Kconfig option to enable TBS client,
that makes the configuration more intuitive.
While configuring GTBS only, the user does not have to explicitly set
the BT_TBS_CLIENT_MAX_TBS_INSTANCES to 0 to disable the TBS client
functionality.
This adds also `tbs_only_client` test case to test the TBS only build
option.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This improves the code readability and reduces flash usage a bit by
spliting up GTBS from other TBS instances in bt_tbs_server_inst
structure, so that some of the code could be conditionally compiled
out.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Add check for CONFIG_BT_TBS_CLIENT_MAX_TBS_INSTANCES > 1 before
comparing inst_cnt, as otherwise it was always false which
caused a coverity issue.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This fixes notification callback that can be called with NULL conn
parameter when peer is being unpaired.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
As long as we do not have NVS support in TBS, the subscriptions shall be
removed once ACL is disconnected to avoid potential crash on
reconnection, as the subscription parameters might be not valid anymore.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes repeated attempt to bt_tbs_client_discover that failed
because srv_inst->current_inst was not cleared during previous discovery
process. The issue seen in case the GATT Read CCID returned an error.
The code has been factored out to separate helper function.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes missing guard access to GATT read parameters.
The code checks `busy` flag and returns an error in case there's ongoing
GATT Read operation already.
Fixes: #58425
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Added assert when looking up the next instance, as the caller of this
function should ensure that the index is correct before calling
discover_next_instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The function is optionally used by the module, and should be
guarded to avoid compiler warnings about unused functions.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
After removing the high default for MCS, it was discovered that
the TBS client requires a significant amount of buffers to work
properly as well. Added the requirement as a build assert that
depends on which optional TBS client features are enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add common function to handle large GATT reads of strings.
Initialize the buffer pointers in the net_buf which is used for large
GATT reads by bt_tbs_client_read_call_state() and
bt_tbs_client_read_current_calls().
Define the size of the allocated buffer based on the enabled features.
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
Clean up occurrences of "#if IS_ENABLED(CONFIG_FOO)" an replace
with classical "#if defined(CONFIG_FOO)".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This fixes error log that has been shown if number of calls in the list
was equal to CONFIG_BT_TBS_CLIENT_MAX_CALLS.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Functions related to string manipulation that were defined in
`common/log.h` has been moved to the `common/bt_str.h` file and their
implementation in `common/bt_str.c`.
Files that were using those functions has been updated consequently.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Replace unnecessary `BT_HEXDUMP_DBG` with `LOG_HEXDUMP_DBG`.
`BT_HEXDUMP_DBG` did an extra cast to `const uint8_t *` on its first
argument. This was probably the reason it was introduced. But the
current definition of `LOG_HEXDUMP_DBG` does this cast for us.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
This fixes GTBS index used in API. The index that is exposed to the
application is 255 in case of GTBS.
The code has been reworked to remove redundant booleans and index that
was kept inside instance.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Fixes the discovery function that handles GTBS only discovery. The
discovery stops when there is no space left for another instance. The
function has been split to improve the code readability and avoid
unnecessary UUID comparison.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes possible memory violation by using the index outside of an
instance array by tbs_client_common_call_control.
This basically fixes the get_inst_by_index function to return NULL if
the index is invalid. The function calls have been guarded to catch the
returned NULL.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
To avoid compilation issues when including tbs.h header file when
CONFIG_BT_TBS_MAX_URI_LENGTH is not set, just pass the URI pointer
instead of an array in bt_tbs_client_call structure.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Any project with Kconfig option CONFIG_LEGACY_INCLUDE_PATH set to n
couldn't be built because some files were missing zephyr/ prefix in
includes
Re-run the migrate_includes.py script to fix all legacy include paths
Signed-off-by: Tomislav Milkovic <milkovic@byte-lab.com>
This change makes the optional procedures in the TBS Client optional
and configurable through Kconfig.
Signed-off-by: Fredrik Danebjer <fredrik@danebjer.com>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
