The updatehub shell cmd_info allocate memory but not checks function
return. This add missing checks and proper error handle.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The current updatehub version forces user application to run in kernel
mode. This add necessary api syscalls to isolate userspace from kernel.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add support for configuring power save timeout in Wi-Fi chipsets.
Changes to configure power save inactivity timer.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
z_cpus_active count becomes incorrect when the state is
PM_STATE_RUNTIME_IDLE and CONFIG_PM_DEVICE is enabled.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
This service allows to synchronize the clock with the application
server.
Synchronization requests are initiated by the device in a regular
interval, configurable via Kconfig.
The implementation only supports TS003-2.0.0, as the previous revision
TS003-1.0.0 requested to temporarily disable ADR and and set nb_trans
to 1. This causes issues on the server side and is not recommended
anymore.
Signed-off-by: Martin Jäger <martin@libre.solar>
This is a prepartion for adding actual services needed for firmware
upgrade over the air (FUOTA).
The services run in a dedicated work queue.
This commit introduces code that initializes the work queue and
provides functions to schedule uplink messages after a given timeout.
Signed-off-by: Martin Jäger <martin@libre.solar>
This commit changes VOCS set location behavior.
When an RFU location is written, VOCS ignores it.
Signed-off-by: Szymon Czapracki <szymon.czapracki@codecoup.pl>
Use the maximum data PDU size time reservation space
considering the Data length could be updated from default
27 bytes to maximum support size.
If maximum time reservation is disabled then time space
reservation corresponding to the default data length at the
time of the start/enable of Central role is used.
Note, currently this value is only used to space multiple central
connections and not for actual ticker time reservations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix connection parameter request procedure to be cacheable
if a remote control procedure is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix legacy control procedure implementation to avoid
connection update procedure with reason instant passed
(0x28).
Connection Update Indication PDU is enqueued after data
enqueue to LLL context is paused and the enqueue resumes
when already enqueued data PDUs are all acknowledged.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove the init command for teh CSIP Set Coordinator.
The main reason for this is that we want to ensure that we
register the conn callbacks early so that `conns` array is
properly filled.
The other callbacks registered in the init function
can easily be moved to where they are needed, and even
unregistered to avoid parsing more data than we need.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
During the NVS initialization, if gc had to be done, the NVS cache
rebuild wasn't called.
Signed-off-by: Julien D'Ascenzio <julien.dascenzio@paratronic.fr>
While porting the coverage.c file from RIOT to Zephyr, which employs
different compiler flags, I noticed several -Wcast-align GCC warnings on
arm. I think, as is, the current implementation may perform unaligned
memory accesses which may not be supported on certain platforms. To
workaround that, I have rewritten the code for RIOT using
bytewise-writes with `memcpy`.
Signed-off-by: Sören Tempel <tempel@uni-bremen.de>
Full resource names aren't as long as combined basename- and name-buffer
sizes but the compiler doesn't know it. Increasing the buffer size to
avoid the compiler warning.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Since the event length update is not necessarily an improvement
in all situations a Kconfig option is added so that it can
be disabled for the users that do not need it.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Fix the controller implementation to perform connection
event length reservation based on the completed Data Length
Update and/or PHY Update Procedure.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
When init_igmp is called the ipv4 pointer was not initialised.
Therefore, a different API needs to be used to ensure that IPv4
is enabled when calling init_igmp.
Fixes#53913
Signed-off-by: Chamira Perera <chamira.perera@audinate.com>
Deprecate the old API and replace with new one which uses
the lwm2m_obj_path struct instead of a string.
Signed-off-by: Jarno Lämsä <jarno.lamsa@nordicsemi.no>
Deprecate send API using the string references as paths.
Replace it with one using path structs.
Signed-off-by: Jarno Lämsä <jarno.lamsa@nordicsemi.no>
Deprecate old API and make new API using path structs
instead of using old string reference based paths.
Signed-off-by: Jarno Lämsä <jarno.lamsa@nordicsemi.no>
Deprecate old API and offer a new API for object and resource
creation and deletion. The new API uses path struct instead
of using a string as a reference to a path.
Signed-off-by: Jarno Lämsä <jarno.lamsa@nordicsemi.no>
Proper handling re. non-supported CIS TERMINATE
This fixes EBQ test LL/PAC/CEN/BV-01-C on the general level.
'Replaces' #ee2a43b5dc
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Add option to disable CRC for fcb entries. This improves the write
throughput significantly at the cost of not detecting corrupted data
in flash. This is beneficial for aplications that needs the extra
write throughput, where error detection is done elsewhere.
Allow the FCB entries in flash to have a valid CRC when CRC is
disabled in the FCB. This allows existing solutions to disable
CRC checking, while keeping the CRC areas intact. Note that this
is a one-way option.
Fixes#53707
Signed-off-by: Eivind Jølsgard <eivind.jolsgard@nordicsemi.no>
Cancelling transfers on suspend contradicts Universal Serial Bus
Specification Revision 2.0, 9.1.1.6 Suspended:
* When suspended, the USB device maintains any internal status,
including its address and configuration.
The internal status definitely includes any pending USB transfers.
If there is a class that wants to cancel transfer on suspend, then the
cancel should be initiated by the class, not the device stack itself.
Update hal_nordic to a version that does not abort all endpoints at
suspend. It seems that aborting endpoints on suspend in nrfx driver was
the actual reason why transfers were canceled on suspend.
Remove transfer retriggering on resume from CDC ACM and Bluetooth class
implementations because transfers are no longer cancelled on suspend.
Other classes do not have any suspend related workarounds implemented.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
When we receive Node Reset message, we schedule work in the system
workqueue to call bt_mesh_reset(). In bt_mesh_reset() we call
bt_conn_disconnect() to disconnect proxy client. bt_conn_disconnect()
will put a buffer to a pool and call k_sem_take to let BT HCI TX thread
process this buffer. Because we stop scanner after disconnecting the
proxy, we can still receive a message at this point. Since BT RX thread
has higher priority than the system workqueue, if we receive a message
while in bt_mesh_reset(), it will be processed when we call
bt_conn_disconnect().
Stop scanner before resetting the mesh to avoid processing of a received
mesh message while in the process of resetting mesh.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
If, while storing app or net key, or changing cdb, we receive another
mesh message that affects setting of the same key that the mesh
currently stores, the new change won't be stored.
The settings subsystem API has rescheduling point inside. The mesh
settings are stored in the system workqueue and by default mesh messages
are processed from BT RX thread which has higher priority than the
system workqueue.
When the case above happens, a new change will be written to the same
cache entry. But this cache entry will be invalidated after leaving
settings API, which in turns will invalidate the new change:
- Receive Config AppKey Add message
cfg_srv.c -> app_keys.c: bt_mesh_app_key_add()
app_keys.c: update_app_key_settings()
app_keys.c: bt_mesh_settings_store_schedule()
- store_pending() in settings.c is scheduled
settings.c -> app_keys.c: bt_mesh_app_key_pending_store()
app_keys.c: store_app_key() called to store new app key
app_keys.c: settings_save_one() calls flash driver and sleeps
- Receive Config AppKey Delete message while in sleep,
which wakes up BT RX thread before returning to the system workqueue
cfg_srv.c -> app_keys.c: bt_mesh_app_key_del()
app_keys.c: update_app_key_settings()
app_keys.c: app_key_update_find() finds entry and returns it
app_keys.c: update->clear = 1
app_keys.c: bt_mesh_settings_store_schedule()
- returning back to bt_mesh_app_key_pending_store() from
settings_save_one()
app_keys.c: update->valid = 0
- the key won't be deleted next time store_pending() is scheduled.
This change moves entry invalidation before calling settings API so that
after returning from settings API, a new change won't be unintentionally
invalidated.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Allow the streams to be paired when creating unicast group. This will
allow to reuse the same ISO for the paired streams.
Fixes: #51796
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The img_mgmt_flash_area_id would add processing of
slot2_partition and slot3_partition if they only exist, even if
not used at all.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add BT_AUDIO_CONTEXT_TYPE_UNSPECIFIED as the default supported
context. This is primarily due to the requirement that it
shall always be supported, and the value 0 (previous
default) was invalid.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The call to set_supported_contexts in set_src_supported_contexts
gave the wrong value by reference.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Unit test project for bt_keys_update_usage().
This part of subsys/bluetooth/host/keys.c unit testing.
Signed-off-by: Ahmed Moheb <ahmed.moheb@nordicsemi.no>
A follow up to commit 1d7a077e11 - apparently the PPP interface should
not be brought entirely down internally, as this can break further
communication with the host. Because of that, reintroduce functionality
that used to be covered by net_if_carrier_down() (which basically
skips the L2 enable(false) call), but limited to PPP scope only.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fixes#53786
The variable slot_plus_us is assumed to be a number in us unit.
To assign the maximum possible CTE length to this variable,
BT_HCI_LE_CTE_LEN_MAX has been used while this parameter is defined
in a 8us units (it's 0x14=20 that corresponds to 160us).
To convert this number to us, it's needed to be multiplied by 8.
Signed-off-by: Saleh Mehdikhani <saleh.mehdikhani@unikie.com>
The bt_has_register_param's preset_sync_support and independent_presets
make sense only if CONFIG_BT_HAS_PRESET_COUNT is non-zero meaning the
CONFIG_BT_HAS_PRESET_SUPPORT is enabled.
Otherwise, those parameters shall be skipped.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Add command to perform the Periodic Advertising Set
Info Transfer procedure, which transfers information
about a periodic advertising set to a connected device.
In essence this is just PAST but from the advertiser
instead of a 3rd device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In ascs.c we had a case where we assigned stream->conn
without taking the ref.
In bt_audio_stream_attach we did not check if stream->conn
was NULL before taking a reference, causing multiple calls
to ase_config to take multiple references.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The purpose of this commit is to facilitate future improvements to the
LPN and friendship feature. By being able to identify friendship related
messages on the advertising layer, it will be possible to treat these in
a specific manner so that message exchange between LPN and friend
devices can be conducted in a more power efficient manner.
This commit adds the following:
- A separate tag for friendship related messages
- A optional separate advertising set for friend related messages
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
