This allows to run tests & examples on the physical board with:
```
west twister -p mps2_an521 --device-testing --device-serial /dev/ttyUSB0
```
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Brings a few improvements and bugfixes, most notably:
- Adds a forward declaration of strnlen()
- Adds a ZCBOR_VERSION macro
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Change the samples and shell to use sinf instead of sin,
as that return the expect float data type, instead of
a double.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In case of ARCv3 we have shared cache disabled after
reset (in ARCv2 it was enabled by default). Let's
enable it at early boot phase (if it's available in HW).
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
ARCv3 processors have HW prefetch feature which is disabled
after reset. Let's enable it.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The paths that got assigned to these variable don't quite match
the description, likely a typo, fix that.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
cortex_a_r lacks of MMU_ALIGN definition. This define is added to the
target linker script when CONFIG_NOCACHE_MEMORY is enabled which
adds .nocache section where this define is used.
Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
Add basic PM support for STM32 RTC counter.
It is useful for Suspend to RAM support to reenable the RTC register clock
after wakeup from Standby.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Create RA & RZ Renesas areas to maintain from previous
"Renesas platforms" area.
Moved rzt2m dtsi from R-Car to RZ area.
Add @soburi as Renesas RA maintainer.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Create a folder for RZ Renesas range device tree to follow how it's
done for other renesas ranges.
It will also help to better delimit areas to maintain.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
This updates host Launch Studio Project and ICS to TCRL 2023-1.
BLS file is deliberately left with Windows CRLF line terminators
since otherwise Launch Studio silently fails to import such
project.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Interrupt handling in this chip is broken beyond repair, anyone unfortunate
enough to have to use it will probably come across this error and wonder
what's up.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Adds an option to disable the automatic initialization of the default
dns_context. This lets applications use the default context, while also
managing the `init` and `close` functions.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
- Remove hadcoded cc2538-bsl.py path
- Use cc1352-flasher program instead
- Add docs about how to install the program
Signed-off-by: Ayush Singh <ayushdevel1325@gmail.com>
It might happens that DT(_INST)_PROP_OR is used with boolean properties.
For instance:
.single_wire = DT_INST_PROP_OR(index, single_wire, false), \
.tx_rx_swap = DT_INST_PROP_OR(index, tx_rx_swap, false), \
This is not required as boolean properties are generated with false
value when not present, so the _OR macro extension is superflous
and the above code can be replaced by:
.single_wire = DT_INST_PROP(index, single_wire), \
.tx_rx_swap = DT_INST_PROP(index, tx_rx_swap), \
Signed-off-by: Roman Studenikin <srv@meta.com>
Fixing this "revealed" bug which got introduced when
a PR added the -Wdouble-promotion flag to GCC builds
Signed-off-by: Sumit Batra <sumit.batra@nxp.com>
For the flash driver, the base address is the MCU internal flash
address (usually 0x8000000). This PR gets the that address
from the device tree node "st,stm32-nv-flash"
instead of relying on the CONFIG_FLASH_BASE_ADDRESS
which might differ when building for another flash memory.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
ROM configures the ISP boot pins as gpio to determine what boot mode to
be in. But some ROM revisions have a bug where they do not restore the
reset state of these pins before booting application. This can cause
power leakage on these pins and is not an intended configuration from
Zephyr user/board point of view, so restore the reset state as part of
early SOC init (disable the pins). Configuration of pins should be
left up to app/board devicetree.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Fix the build of the gpio driver BD8LB600FS on the
board intel_adl_crb.
Fixes#68219.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
The MQTT docs used K_MSEC() to provide the timeout parameter to poll().
Doing this causes a compilation error as poll() expects it's
third parameter to be of type int, not k_timeout_t.
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
ICMPv4/6 modules print error when ICMP message handling fails, which
includes no message handler registered. This is a bit problematic, as
there are many ICMP messages that Zephyr does not process, and every
time such a message is received, an error log is printed (which wasn't
the case before ICMP rework).
Restore the old behavior (no log on unrecognized ICMP message) by
explicitly filtering out ENOENT error code from printing error. That
way, log will only be printed if an error occured within the actual
message handler.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a new workflow to build the hello world sample application on all
three supported platforms using the reusable setup action.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
When COMPILER_WARNINGS_AS_ERRORS is set, let's also have the
native simulator runner (and anything Zephyr requests built with it)
be built with the same option to treat warnings as errors.
Otherwise we will miss those by default in CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Use the kconfig option COMPILER_WARNINGS_AS_ERRORS instead
of passing the compiler option directly to the build.
That allows us to do whatever needs to be done in cmake to ensure
warnings are treated as errors.
Also handle better options and paths with spaces on them.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The driver uses pinctrl to configure pins instead of nrfx I2S API.
Check whether MCK pin was actually connected by pinctrl instead of
comparing nrfx_cfg.mck_pin that is always NRF_I2S_PIN_NOT_CONNECTED.
This makes it possible for nRF I2S to provide master clock even when
operating in I2S Slave mode.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
As discussed during DHCPv4 server integration, group DHCPv4 client files
with DHCPv4 server in a single lib directory.
Renamed internal "dhcpv4.h" header to "dhcpv4_internal.h" so that it's
not confused with the public "dhcpv4.h" header.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When debugging it is hard to remember each state value (e.g. 0, 1, 2,
3) means. Therefore, make functions to improve logging for humans.
Fixes#59679
Signed-off-by: Ping Wang <pinw@demant.com>
The driver cannot handle OUT transactions for an endpoint with an
MPS smaller than 64 bytes. To solve the issue, we will not use one
fixed value, EP_MPS, but instead use the actual MPS of an endpoint,
ep_state->ep_mps.
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Add simple I2S output sample. This sample is verified with the RT1060
EVKB, but can be ported to any board with I2S support. It simply
demonstrates how to write I2S output data using the I2S API. The output
can be verified using a signal analyzer, if the user desires.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Added Kconfigs to define the size of:
- UART backend receive buffer
- UART backend transmit buffer
- Satellites array size
and increased the UART RX buffer size a default to 256 as 128
is just on the edge of to small at a baudrate of 115200.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The pipe should be closed when suspended, both to save ressources
and to flush it. Without flushing the pipe, the driver may fail
to either resume or suspend the GNSS as the chat module starts
processing old data, which can contain acks to commands, breaking
the scripts.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The implementation of power management did not account for
being on a power domain when initializing, and handling being
powered on and off at runtime.
The GNSS requires time to start up, which it always does when
powered on, before accepting commands. It also requires time
after resuming and suspending before accepting commands.
This commit implements this timeout, and improves logging to
make the power management more transparent, and removes some
redundant parenthesis for better readability.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
