Add functions that give possibility to enable or disable
CTE receive and sample in connectionless mode.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add connectionless CTE RX feature to list of features supported
by controller. Add direction finding initialization in hci_core
if the feature is enabled.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add HCI_LE_Connectionless_IQ_Report event that will allow controller
to report received CTE and provide collected IQ samples to host.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add new command HCI_LE_Set_Connectionless_IQ_Sampling_Enable that
will allow host to enable CTE sampling in controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
All commands are put in the file according to OpCode Command Field
increasing order. bt_hci_cp_le_set_cl_cte_tx_enable was written in
wrong position. This commit moves it to correct one.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Update the documentation for L2CAp Connection oriented channel send
function to include better description of the L2CAP PDUs (Basic frames)
and L2CAP SDUs (Credit-based frames) so that the application can better
understand how to size the buffer pools and setting the RX mtu.
Document stack behavior on RX path and how the application has to
set up the channel in order to receive segmented packets.
Document stack behavior on TX path for reserving either mandatory or
optional header bytes.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor and simplify the bluetooth buffer configurations to improve the
easy of configurations and eliminate invalid ones.
By moving configurations out of host and controller specific
configurations and into a common one it becomes easier to configure
the host and controller separately as the same configurations can be
used as would be for a combined build.
All HCI configurations are now given exluding the matching HCI header,
which eases the configuration as the application don't have to know the
different header sizes.
The BT_RX_BUF_LEN is split into ACL and Event, as well as the suprising
use of Command size.
BT_L2CAP_RX_MTU is removed as the stack does not support reassembling of
HCI ACL data to larger L2CAP PDUs. The application will have to set
ACL RX size and account for the L2CAP PDU header itself.
BT_EATT_RX_MTU was removed as it is only used for setting a different
default value for another option which leads to the stuck kconfig symbol
problem.
The configurations can be updated according to the table below:
** New configuration | ** Old configuration
All configurations
BT_BUF_ACL_RX_SIZE | BT_L2CAP_RX_MTU + 4
BT_BUF_ACL_RX_SIZE | BT_RX_BUF_LEN - 4
BT_BUF_EVT_RX_SIZE | BT_RX_BUF_LEN - 2
BT_BUF_CMD_TX_SIZE | BT_RX_BUF_LEN - 3
BT_BUF_CMD_TX_COUNT | BT_HCI_CMD_COUNT
BT_BUF_EVT_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_ACL_RX_COUNT
BT_BUF_EVT_DISCARDABLE_SIZE | BT_DISCARDABLE_BUF_SIZE - 2
BT_BUF_EVT_DISCARDABLE_COUNT | BT_DISCARDABLE_BUF_COUNT
Controller-build
BT_BUF_ACL_TX_SIZE | BT_CTLR_TX_BUFFERS_SIZE
BT_BUF_ACL_TX_COUNT | BT_CTLR_TX_BUFFER
HCI-bridge
BT_BUF_ACL_TX_SIZE | BT_HCI_ACL_DATA_SIZE
BT_BUF_ACL_TX_COUNT | 6
Fixed invalid configurations setting either BT_L2CAP_RX_MTU or
BT_CTLR_DATA_LENGTH_MAX larger than BT_RX_BUF_LEN could lead to buffer
overruns.
Fix advertising report max data length calculation.
This always used the BT_DISCARDABLE_BUF_SIZE macro but this feature
can be turned off and advertising reports will be allocated from the RX
buffer in that case. Also controller-build does not have this buffer
(in hci_raw.c). Also the wrong HCI header was used in the calculation,
HCI event header should have been used instead of HCI ACL header.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add macros for calculating buffer sizes, accounting for the various
L2CAP and HCI headers needed as well as the reserved bytes needed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update RFCOMM to use the new delayable work API for the RTX host timer
used for disconnecting and idling.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Improved the documentation for the ISO data paths, as well
as making the bt_iso_setup_data_path function a bit more
clear.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Moves the callback structure for VOCS to the register function
which is renamed from init, as there's no reason to register
the callbacks separately.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds documentation specifically for empty notification in the
bt_gatt_notify_func_t callback, as that works a bit different
from e.g. reading an empty characteristic.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the BT_GAP_PER_ADV_MIN_INTERVAL and BT_GAP_PER_ADV_MAX_INTERVAL
macros in gap.h that are also reference in bluetooth.h and
used for parameter validation in adv.c.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds name length checks. The OTS spec does not
explicitely specifiy a maximum name length, but the
maximum name length in the directory listing object
shall be less or equal to 120 octets.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixes a typo where the BT_GAP_PER_ADV macros had MAX twice,
as well as adding a MIN timeout macro and check.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds a note about buffer ownership and error handling of
bt_iso_chan_send so it is aligned with recent changes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a note about buffer ownership and error handling of
bt_l2cap_chan_send so it is aligned with recent changes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a new flag, BT_LE_ADV_OPT_FORCE_NAME_IN_AD, which can be used
to force the Bluetooth GAP device name to appear in the advertising
data rather than the scan response data of an advert with scan response
data.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
Document the default behavior of LE connection parameters request when
the application has not defined a callback.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Periodic publication would previously build and send the first
publication inside the bt_mesh_model_pub() function, before cancelling
and rescheduling the next publication. The timer handler would only
handle retransmissions, and would abandon the rest of the publication
event if one of the packets failed to send.
This design has three issues:
- If the initial timer cancel fails, the publication would interfer with
the periodic publication management, which might skip an event or
send too many packets.
- If any of the messages fail to publish, the full publication event
would be abandoned. This is not predictable or expected from the API.
- bt_mesh_model_pub() required 384 bytes of stack to build the message,
which has to be factored into all calling threads.
This patch moves all transmission into the publication timer by
replacing k_work_cancel with a single k_work_reschedule(K_NO_WAIT). It
also changes the error recovery behavior to attempt to finish the full
publication event even if some of the transmissions fail.
Split out from #33782.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
First design towards ISO adaptation layer, this PR introduces
data-structures and framework for Rx unframed PDUs (BT RX ingress).
Two callbacks are defined for the SDU production (BT RX egress), one for
SDU allocation as well as a callback for emitting a reassembled SDU.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
This commit implements the secondary service
Audio Input Control Service (AICS) server and client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add include <bluetooth/mesh/msg.h> into <bluetooth/mesh/access.h> to get
definition of 'struct bt_mesh_msg_ctx'.
We see this when trying to build the mesh_badge sample for the
reel_board.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adds #defines for the minimum (first) and maximum (last)
attribute handles in ATT. These are useful for when setting e.g.
the start and end handle when doing a full GATT discover.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The implementation of blocking calls is common for all the client
models.
This change reduces the code duplication by introducing new API that
helps to manage acknowledged messages.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds two functions:
1) Lookup periodic adv sync object by address
2) Get information about a periodic adv sync object.
These can be useful for the application verify if there is already an
existing sync to an periodic advertiser.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add discovery of standard descriptor values. This provides a shorthand
instead of doing a read by UUID, allowing the application discovery
procedure to re-use the discover parameters for simple descriptors.
Fixes: #21489
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add Server Characteristic Configuration definitions for bit values
and attribute value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add BT_UUID_IAS for Immediate Alert Service
Add BT_UUID_LLS for Link Loss Service
Add BT_UUID_HPS for HTTP Proxy Service
Add BT_UUID_ALERT_LEVEL for Alert Level
Add BT_UUID_URI for URI
Add BT_UUID_HTTP_HEADERS for HTTP Headers
Add BT_UUID_HTTP_STATUS_CODE for HTTP Status Code
Add BT_UUID_HTTP_ENTITY_BODY for HTTP Entity Body
Add BT_UUID_HTTP_CONTROL_POINT for HTTP Control Point
Add BT_UUID_HTTPS_SECURITY for HTTPS Security
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Adds a parsing mechanism for Composition data page 0 in the Config
Client API, and uses it in the shell module to parse the incoming
composition data.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The first byte of the composition data status message is the returned
page index, not the status of the request. This is now reflected in the
API.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The Configuration Client doesn't check the address in a received
response. This means that a response from any device will be accepted.
This change ensures that the correct response will be accepted.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Channel direction was actually a source of confusion since the spec does
actually define the data path direction from controller point of view
meaning input actually means transmit and output receive, also direction
can be configured with different QoS settings.
To make these APIs less confusing and allow QoS to be configured
independently they are now split into RX (receiving) and TX
(transmission) settings including its data path.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes bt_iso_cleanup when there are still channels bound to the
ACL connection.
On top of it introduce bt_iso_chan_unbind which can be used to unbind
channels and thus release the reference to the ACL connection if that
has not been disconnected in which case the channels are unbind
automatically.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This commit implements the secondary service
Volume Offset Control Service (VOCS) server and client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The directory listing object is an internal object which
content is the aggregation of all the metadata of all objects
(including the directory listing object itself). The client
can read this value to get a list of all objects with names,
lengths, and other metadata.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a Proxy callback structure with a callback for Node ID enable and
disable. This API follows the Friend and LPN API pattern in mesh/main.h,
and can be expanded with more callbacks later.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add the option CONFIG_BT_HCI_ACL_DATA_SIZE which allows the user
to configure the max HCI ACL data payload. This is needed for platorms
where the BLE LL, HCI uart and host run on three different cores.
Fixes: #30441
Signed-off-by: Johan Stridkvist <johan.stridkvist@nordicsemi.no>
Adds a "polled" function to the friend callback structure, that gets
called every time the friend receives a poll message. The polled
callback is called before the establish callback, to match the LPN
behavior.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The SCA (sca) field of bt_iso_chan_qos did not give much
information about the expected values or what they meant,
nor any information about what the value perhaps should be.
Updated the description and the ISO shell.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Switch to new work API. Avoid a racy cancel by allowing the work
handler to deal with an immediate off when the time remaining changes
to zero.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
