The IPPROTO_RAW is used as a default for SOCK_RAW when protocol
is not set in socket() call.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to disable native IP stack and use offloaded IP
stack instead. It is also possible to enable both at the same
time if needed.
Fixes#18105
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit is an implementation of 6LoCAN, a 6Lo adaption layer for
Controller Area Networks. 6LoCAN is not yet standardised.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
These are needed in sendmsg implementation. See RFC 3542 for
details of the msghdr struct and the macros that are used
to manipulate it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow application to listen network management events using
BSD socket API. Application needs to create the socket using
AF_NET_MGMT address family. At this point we only support
receiving network management events that the network subsystem
is sending.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It will help to use IS_ENABLED in place of #ifdef in relevant place.
Only struct net_if uses this structure.
In case only IPv4 is used, it will bloat up this struct by 12 bytes.
There are few reasons why this is "ok" in this case:
- On limited rom/ram system it will be unlikely to find a lot of
network interfaces so it should not harm much to raise the size of
struct net_addr.
- If IPv4 is the only enabled IP version, it gains a good amount of
rom/ram to discard IPv6 support so it is fine to steal a bit of this
gain to bloat up a bit struct net_addr.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These can be used as getsockopt/getsockopt params and required for
compatibility with existing socket applications.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
No functionality changes, just doxygen additions and some
things are hidden from document generation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows user to create a CAN socket and to read/write data
from it. From the user point of view, the BSD socket CAN support
works same way as in Linux.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds PF_CAN and AF_CAN protocol family identifiers
that are used by BSD socket CAN support code.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Vipin Anand <vipin.anand@intel.com>
Various defines and helpers for supporting packet sockets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Though these are currently used by the core only, it will be then used
by net_context as well. This one of the steps to get rid of net_pkt's
appdata/appdatalen attributes.
Also normalizing all ip/proto parameters name to ip_hdr and proto_hdr.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is the macro name that matters, not its value. Here, that will help
to save 1 bit in struct net_pkt later on.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
c++ does not allow implicit conversions and setting -fpermissive just
causes a huge load of warnings to appear and hides real errors.
This commit converts those implicit conversions to c-style explicit
conversions.
Signed-off-by: Alexander Polleti <metapsycholo@gmail.com>
Unify the function naming for various network checking functions.
For example:
net_is_ipv6_addr_loopback() -> net_ipv6_is_addr_loopback()
net_is_my_ipv6_maddr() -> net_ipv6_is_my_maddr()
etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive an IPv6 packet with organisation scope multicast
address FF08:: then we must drop it as those addresses are
reserved for organisation network traffic only.
Fixes#10961
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive an IPv6 packet with site scope multicast
address FF05:: then we must drop it as those addresses are
reserved for site network traffic only.
Fixes#10960
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive an IPv6 packet with interface scope multicast
address FF01:: then we must drop it as those addresses are
reserved for local network traffic only.
Fixes#10959
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive an IPv4 that has broadcast destination address, then
properly handle it.
This means that for
* ICMPv4, if CONFIG_NET_ICMPV4_ACCEPT_BROADCAST is set (this is the
default value) and we receive echo-request then accept the packet.
Drop other ICMPv4 packets.
* TCP, drop the packet
* UDP, accept the packet if the destination address is the broadcast
address 255.255.255.255 or the subnet broadcast address.
Drop the packet if the packets broadcast address is not in our
configured subnet.
In sending side, make sure that we do not route broadcast address
IPv4 packets back to us. Also set Ethernet MAC destination address
properly if destination IPv4 address is broadcast one.
Fixes#10780
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add utility function that returns true if given IPv4 address is
a broadcast address. This will be used in later commits to check
received packet IPv4 source and destination addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove extra ntohl() calls when checking IPv4 address against
a subnet address.
Convert also the IPv4 address to be const as the netmask related
functions do not change its value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of one global log level option and one on/off boolean
config option / module, this commit creates one log level option
for each module. This simplifies the logging as it is now possible
to enable different level of debugging output for each network
module individually.
The commit also converts the code to use the new logger
instead of the old sys_log.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Replace #defines for s_addr/s6_addr etc. in in_addr/in6_addr structures
within net_ip.h with fixed fileds inside an anonymous union. This
prevents intrusive behaviour of net_ip.h, which expands every occurence
of s_addr/s6_addr with it's own define, even in other, non-related
structures.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
POSIX defines INET_ADDRSTRLEN and INET6_ADDRSTRLEN as max sizes of
textual form of IP addresses (including terminating NUL):
http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/netinet_in.h.html
We already define INET6_ADDRSTRLEN, so it makes sense to define
INET_ADDRSTRLEN too.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
As we return stuff that is probably in the flash the return type should
be const char * and not char * as the user better doesn't try to change
them!
Signed-off-by: Alexander Polleti <metapsycholo@gmail.com>
Make several enums, that are used inside structs, to be packed so
that they use only needed amount of memory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Best Effort is the default priority with the assigned value of 0, but
Background is the lowest priority with the assigned value of 1.
Ref: IEEE 802.1Q, Chapter I.4, Table I-2.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This allows network stack headers to be included even if
no L3 networking support is enabled in Kconfig.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add tls_context structure that stored data required by TLS socket
implementation. This structure is allocated from global pool during
socket creation and freed during socket closure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This is actually the same as #7229 in which we missed this side of
conversion (only PCP to packet priority was implemented).
The conversion is actually the same both ways, thus it uses the map
added earlier.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Add functions that will return correct source IPv4 address
according to given destination address. This is done similar
way as for IPv6.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
According to IEEE 802.1Q the VLAN priority (PCP) is not directly mapped
to the network packet priority. The Best Effort priority has a PCP value
of 0. The lowest priority (Background) has a PCP value of 1.
All the values are mapped according to the following table:
+-----+-----+---------+
| PCP | PRI | Acronym |
+-----+-----+---------+
| 1 | 0 | BK |
| 0 | 1 | BE |
| 2 | 2 | EE |
| 3 | 3 | CA |
| 4 | 4 | VI |
| 5 | 5 | VO |
| 6 | 6 | IC |
| 7 | 7 | NC |
+-----+-----+---------+
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Currently the VLAN priority is the same as packet priority but
if such conversion is needed, then this function can be used
for such conversion.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows creation of virtual lan (VLAN) networks. VLAN support is
only available for ethernet network technology.
Fixes#3234
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With this commit it is possible to add priority to sent or received
network packets. So user is able to send or receive higher priority
packets faster than lower level packets.
The traffic class support is activated by CONFIG_NET_TC_COUNT option.
The TC support uses work queues to separate the traffic. The
priority of the work queue thread specifies the ordering of the
network traffic. Each work queue thread handles traffic to one specific
work queue. Note that you should not enable traffic classes unless
you really need them by your application. Each TC thread needs
stack so this feature requires more memory.
It is possible to disable transmit traffic class support and keep the
receive traffic class support, or vice versa. If both RX and TX traffic
classes are enabled, then both will use the same number of queues
defined by CONFIG_NET_TC_COUNT option.
Fixes#6588
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move IP address settings from net_if to separate structs.
This is needed for VLAN support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
