Trigger erasing solicitation settings before calling
`bt_mesh_settings_store_pending` and `bt_mesh_prov.reset` callback.
The `bt_mesh_settings_store_pending` flushes every settings that is
pending to be erased. The `bt_mesh_prov.reset` callback must be called
as the last step because a user is free to do anything from this
callback including rebooting or reprovisioning the device.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Disables pb gatt- and gatt proxy advs when suspending Mesh, and
enables them again when resuming Mesh.
Adds `bt_mesh_adv_gatt_send` to `bt_mesh_resume` to make sure that
GATT advs start after resumption.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Commit adds implementation of the specification
recommendations regarding randomization of
responses on the access layer.
3.7.3.1 Transmitting an Access messages
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Disables Mesh advertising when suspending, and enables advertising
when resuming Mesh.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
the reason is that the Mesh Profile clearly stipulates that Mesh nodes
cannot change their own element definitions.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Since model struct most of member should not change at run time,
so mark as const will be suitable and safely.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
This fixes the error below:
main.c: In function ‘bt_mesh_provision’:
main.c:173:17: error: ‘node’ may be used uninitialized in
this function [-Werror=maybe-uninitialized]
173 | bt_mesh_cdb_node_del(node, true);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
PR instantiates cdb and core keys to prevent scenario
when key is changed over cdb API and gets new ID but
core still operates with old ID(potentially invalid).
Known issue the keys will be desynchronized
during\after key refresh procedure.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
A mesh key type has been added to be able to choose the different
key representation for different security libraries.
The type as well as some functionality related to Mesh key
management has been added as a public API.
If tynicrypt is chosen then keys have representation
as 16 bytes array. If mbedTLS with PSA is used then keys are
the PSA key id. Raw value is not kept within BLE Mesh stack
for mbedTLS. Keys are imported into the security library
and key ids are gotten back. This refactoring has been done
for the network(including all derivated keys), application,
device, and session keys.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
This allows to move flash operations from the context that triggered
bt_mesh_provision or bt_mesh_reprovision to the mesh settings work item
that runs on the system workqueue. This is required to for a case where
the mesh settings work item is running on a separate thread instead of
the system workqueue to unblock the system workqueue eventually.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Commit gets rid of host dependency to generate DH key.
Mesh uses its own function for it that has synchronous
behavior and correct endianism. It simplifies the provisioning
state machine since it doesn't require waiting for the host HCI
handler.
Also, it removes hidden cross-dependency between BLE Mesh and
SMP in the aspect of competition for the same DH key
(https://github.com/zephyrproject-rtos/zephyr/issues/23292)
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Commit splits mesh crypto module on security library dependent
and independent parts.
Independent part includes security toolbox implementation.
Dependent part includes security algorithms usage based on
API third party security library.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Private Beacons and Secure Network Beacons are not mutually exclusive by
spec. This means both beacons can be sent simultaneously. For both
beacons spec defines their own observation intervals and related
parameters, which means we need to monitor both beacons types
separately.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
After commit 3486f133e9
GATT Proxy service registration is broken because it is registered from
settings_load() in mesh_commit(). Because mesh_commit() is called before
sc_commit() is called in gatt.c, bt_gatt_service_register() can't be
called yet.
Use k_work to postpone the service registration.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This is initial implementation of Proxy solicitation procedure.
This includes:
- support for sending and receiving Solicitation PDUs
- On-Demand Private Proxy functionality (Server and Client) controlling
behaviour of node after receiving Solicitation PDU
- Solicitation PDU RPL Configuration (Server and Client), which manages
Replay Protection List for Solicitation PDUs.
Proxy Solicitation allows to enable advertising of Proxy service on node
by sending Solicitation PDUs. These PDUs are not part of Mesh messages;
instead, these are non-connectable, undirected advertising PDUs with
their own format, containing Proxy Solicitation UUID.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
This patch adds for handling Models Metadata Get Page 128.
Signed-off-by: Michal Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds remote provisioning models rpr_srv and rpr_cli, and exposes them as
a bearer for the provisioning process.
The remote provisioning models provide the following features:
- Remote provisioning of new devices, using a remote provisioning server
as a proxy.
- Reprovisioning of existing devices, generating a new device key and
changing addresses and composition data.
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Co-authored-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
When we receive Node Reset message, we schedule work in the system
workqueue to call bt_mesh_reset(). In bt_mesh_reset() we call
bt_conn_disconnect() to disconnect proxy client. bt_conn_disconnect()
will put a buffer to a pool and call k_sem_take to let BT HCI TX thread
process this buffer. Because we stop scanner after disconnecting the
proxy, we can still receive a message at this point. Since BT RX thread
has higher priority than the system workqueue, if we receive a message
while in bt_mesh_reset(), it will be processed when we call
bt_conn_disconnect().
Stop scanner before resetting the mesh to avoid processing of a received
mesh message while in the process of resetting mesh.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This fixes an issue where IV index stage counting timer is not
started after the node is provisioned. This would have prevented node
from performing IV index updates.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Upon bt_mesh_reset call, all mesh modules has to clear the privisioning
and configuration data. None of the modules store or erase in settings
subsystem immediately, but put this on the mesh settings work. After the
settings work is scheduled, all stored data will be removed and the
device will eventually be unprovisioned. Until then, the device is not
completely unprovisioned, thus calling bt_mesh_prov_enable,
bt_mesh_provision (and bt_mesh_cdb_create) should not be allowed.
Struct bt_mesh_prov has a reset callback stating that after this
callback is called, the device has been reset and can be re-provisioned
again. Also, bt_mesh_reset API description states that after calling
bt_mesh_reset API, the device needs to reenable the provisioning layer
to be provisioned again. But this is not correct since the settings has
to be cleared before the device can be reprovisionined.
This commit makes bt_mesh_reset flush pending settings so that the
device can be reprovisioned immediately and the API will behave as
written in the description.
The same applies to bt_mesh_cdb_clear.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
we will no longer need the additional `disconnect` parameter,
such as we only process gatt database from disconnect handler.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
When device is first provisioned with IV Update
flag is set to 0, it should wait for minimum of
96 hours before going into IV Update In Progress
state. Such limit does not apply, if device is
provisioned with IV Update flag is set to 1.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Adds defines for ECC public keys, private keys, DH keys and key
coordinates. Replaces raw numbers throughout.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Align the capitalization of the term "Bluetooth Mesh" to Bluetooth mesh"
in the documentation. This is done to to match the new updated naming
convention done in Bluetooth SIG. In the upcoming spec versions, it its
used "Bluetooth mesh" with the lower case convention.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
The Bluetooth proxy feature includes proxy client
and proxy server. In addition to the proxy pdu
message used above, pb-gatt also uses the same
proxy pdu message.
Currently zephyr bluetooth mesh couples them in one file.
A file at the separation is called gatt_services.c,
which is used to contain Mesh Provisioning Service
and Mesh Proxy Service.
Another file in the separation is called proxy_msg.c,
which is used to process Proxy pdu messages.
Also according to Trond's suggestion:
Rename `CONFIG_BT_MESH_PROXY` to `CONFIG_BT_MESH_GATT`.
Create an additional promptless entry
`CONFIG_BT_MESH_GATT_SERVER` that selects
`CONFIG_BT_MESH_GATT` and is selected by
`CONFIG_BT_MESH_GATT_PROXY` or `CONFIG_BT_MESH_PB_GATT`.
Create additional `CONFIG_BT_MESH_PROXY` used to represent
proxy feature (also include proxy client).
see #36343
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
This commit fixes an issue where bt_mesh_reset() call just erases all
mesh flags set at the initialization instead of restoring them and
thus disabling some features until the board reboot.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
When PROVISIONER and CDB is enabled then IUT couldn't be a NODE.
This patch fixes this by not returning an error when CDB is not
configured. This is useful especially in testing environment, when all
the features are compiled in and we can choose role in runtime.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Switch to the new API in friend, net and main.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Periodic publication would previously build and send the first
publication inside the bt_mesh_model_pub() function, before cancelling
and rescheduling the next publication. The timer handler would only
handle retransmissions, and would abandon the rest of the publication
event if one of the packets failed to send.
This design has three issues:
- If the initial timer cancel fails, the publication would interfer with
the periodic publication management, which might skip an event or
send too many packets.
- If any of the messages fail to publish, the full publication event
would be abandoned. This is not predictable or expected from the API.
- bt_mesh_model_pub() required 384 bytes of stack to build the message,
which has to be factored into all calling threads.
This patch moves all transmission into the publication timer by
replacing k_work_cancel with a single k_work_reschedule(K_NO_WAIT). It
also changes the error recovery behavior to attempt to finish the full
publication event even if some of the transmissions fail.
Split out from #33782.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The error code from gatt_service_register is being ignored to ensure
that repeated actions still complete. Do this explicitly by adding
(void) casts, resolving coverity warnings on accidental error code
ignores.
Fixes#33051.
Fixes#33074.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
After #31176, the network would get stored immediately in
bt_mesh_net_create, causing the address and devicekey to get stored as
their zero-initialized version, as they're only being set in the
bt_mesh_comp_provision call, which fires after.
Fixes#32067.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The mesh settings.c module is a giant piece of code responsible for
storing the mesh stack configuration. Such approach makes it difficult
to control the data to be stored, breaks the stack modules'
encapsulation by forcing them to reveal the internal kitchen, which
leads to unpleasant issues such as #19799.
This commit moves the responsibility of storing the configuration
to corresponding modules while keeping control of the moment of storing
the configuration and of starting the stack after the settingss loading
is completed.
This doesn't introduce any abstraction between the mesh settings.c and
other modules as it will add more complexity and overhead than necessary
for the actual task.
Fixes#19850
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds support for extended advertiser commands in the mesh. This doubles
throughput for common packet sending, and significantly improves timing
accuracy for the Friend and Low Power features.
The proxy module's advertisement control has been moved inside the adv
module to abstract away the different advertiser modes.
The extended advertiser mode does not need an advertising thread to
operate, and ends up with a net reduction in RAM usage.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Moves mesh feature configuration to a separate module, deprecating the
bt_mesh_cfg_srv structure. The initial values for the features should
now be enabled through KConfig, where new config entries have been added
for each feature.
This removes the upward dependency on the config server from the core
stack, and makes the config server a pure frontend for the configuration
states, as all spec mandated behavior around the feature states is now
encapsulated.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Encapsulates the Heartbeat state and functionality in a separate
heartbeat module, removing all manipulation of the heartbeat state from
the transport and config server modules.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Moves the virtual address labels to the transport layer, disconnecting
them from the configuration server.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
