On ACE RSE bits should be cleared unconditionally
if ssp is no longer in use
This will allow to successfully disable SSP in
dai_ssp_pm_runtime_dis_ssp_power()
and enable it correctly in the next run
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
The various qemu_cortex_a53 defconfigs diverged.
We harmonize these files, and put config-specific
features at the end.
Signed-off-by: Henri Xavier <datacomos@huawei.com>
Adjust the flash size of the nucleo_wb55rg board from
STMicroelectronics to the exact flash as defined by the DTS
of the stm32wb55Xg.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
- Add CIS Create policy config choices
- Implemented CIS Central in ULL following proposed setup/commit flow
- Full support for HCI_LE_Set_CIG_Parameters_Test
- Extend ull_conn_iso_start and ull_conn_iso_ticker_cb to handle
central role
- Partial support for HCI_LE_Set_CIG_Parameters. TODOs:
* Drop suggested retransmissions if Max_Transmission_Latency is
exceeded
* Calculate ISO interval based on policy
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix issues with referencing invalid netbuf data and add missing
parameter. Removed returning of handle in setup functions, as handles
are not available until commit.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Move ull_peripheral_iso_start ull_peripheral_iso_ticker_cb to
ull_conn_iso, to share code between CIS peripheral and central.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Local procedure for CIS central establishment. Calls yet unimplemented
functions in ull_central. Changes are guarded by
CONFIG_BT_CTLR_CENTRAL_ISO.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Add missing fields in structure containing the arguments used by
the host commands handlers and change the order of parameters
in macro used for defining the handlers.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
This commit increases the stack size for thread handling the host
commands requests. It was required due to the stack being
corrupted using earlier default size. The thread priority is now
configurable using the Kconfig.
It also adds alignment to the tx_buffer since the npcx MCU requires it
to work correctly and removes clearing the buffer before use due to
the hard time requirements. Tests checking if buffers are cleared
are also removed.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
Move the header file to corresponding directory which refers to
submodule name instead of root of drivers directory.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
The functions for ec_host_cmd_periph are only used by statically defined
kernel thread and should never be used from other subsystem, especially
from userspace. This commit removes the syscalls prefixes from these
functions and leaves them as inline call to API implementations from
peripheral.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
Updated the clock_init function to the latest sdk
and added a safe initialization for the flash setup
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Added a selecion on rt6xx that allows the loading of
the safe flash clock initialization to be inside SRAM
if the user code is being executed from flash.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Set FlexSPI read address option bit (READADDROPT) in early boot for
FlexSPI on RT1010. This fixes an issue where the FlexSPI fetch would
return invalid data, resulting an a HardFault.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Call CMSIS SystemInit at early platform boot, to ensure that registers
are configured correctly on RT10xx series.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This adds a test to see if z_phys_unmap() can reclaim memory
correctly, so that the next z_phys_map() re-uses the same
address (with identical input arguments).
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In z_phys_unmap(), the call to virt_region_free() is not using
aligned virtual address and space. This can result in freeing
smaller region that allocated given that inputs to z_phys_unmap()
may not be aligned. So use the already calculated aligned
virtual address and size as input to virt_region_free().
Note that the assertion and if-block in virt_region_free() to
check whether the to-be-unmapped region is within the virtual
memory region needs to be trimmed by one byte at the end.
The assertion and if-block are checking against the region
end address but (start + size) is just one byte over the end.
So subtract one.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some documentation has not been properly formatted for generating
and some has been inaccurate.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit moves MCUmgr SMP transport documentation from
subsys/mgmt/mcumgr/lib to doc/services/device_mgmt.
Documentation have been rewritten for that purpose.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit reworks mgmt/mcumgr subsystem source code to remove
lib subdirectory and make it a little bit more flat.
It also moves all API interface files, which are supposed to be
visible by applications using MCUMgr, to interface sub-directories,
and exposes them with full paths; for example to include general
MCUMgr support, group registration and so on, user would now include:
<mgmt/mcumgr/mgmt/mgmt.h>
to additionally have control on File System group management
registration user would need:
<mgmt/mcumgr/mgmt/grp/fs_mgmt.h>
All internal headers have been removed from interface.
CMAkeLists.txt get significant rework and various MCUMgr subsystems
have been divided into separate sub-libraries.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
FPGA drivers should be built on a regular basis to ensure
that there are no regressions. To that end, the sensors
build_all test was cloned, trimmed-down, and the ice40
driver is built with the two separate devicetree-specified
configurations (load modes).
The first load mode is for regular SPI bitstream flashing
(useful for higher-end microcontrollers with a faster clock).
The second load mode is for bitbanged GPIO bitstream flashing
(useful for lower-end microcontrollers that need to squeeze
every cycle of performance to meet timing requirements for
iCE40 bitstream loading).
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Replace the BT_CTLR_ADVANCED_SCHEDULING_CENTRAL_CONN_SPACING
Kconfig with BT_CTLR_CENTRAL_SPACING to configure the
the spacing from the beginning of a central connection event
to beginning of the next central connection when supporting
multiple simulataneous central connections.
If the BT_CTLR_CENTRAL_SPACING in microseconds is smaller
then the required time reservation for a connection event,
for given maximum data length and PHY in use, then the
calculated time reservation will be used as the spacing
between consecution central connection events.
The change fixes an issue wherein use of old Kconfig with
higher values causes new central connections to be placed
in between already connected central role if there was
free time space available to fit the new connections time
reservation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This add links to the MCUmgr documentation so that it will be
automatically linked in sphinx and fixes a link to the wrong
function.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add test coverage for the child-binding include feature. It includes
verification of included properties as well as usage of allow/blocklist.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
RTC is 24 bit width and k_timer is 64 bit. It is hard to test corner
cases but RTC hardware feature can help here. There is a task which
moves counter to 0xfffff0 which is close to overflow. However, there
is an internal driver state that also needs to be aligned to shift
the time properly. Adding optional function which triggers overflow
and updates internal state. This can be used for testing corner cases.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Clang version used by ARCMWDT does not support -fno-pic and -fno-pie
flags.
Flags were added into arcmwdt branch by
commit 8259931fce ("xcc-clang: Do not used unavailable options").
Initially they were set in common CMakeLists.txt via
zephyr_cc_option() function, which filtered them out, and they
did not used in builing process.
Signed-off-by: Nikolay Agishev <agishev@synopsys.com>
This patch updates ipc response procedure in power down function. New
flow is only limited to the writs into two registers. We need to clear
the IPCxIDD register in case if its contains any leftovers from a
previous responce. And then write a response to the IPCxIDR.
To prepare response we need to copy incoming request and then mark it as
replay. New message with IPC Busy bit set is then send to host.
The reason for this is a change in the behavior of the IPC driver
compared to how it worked when this function was originaly implemented.
The biggest difference are enabled interrupts in register IPCxCTL.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Increase the min ram configuration when running the
libraries.cmsis_dsp.transform.cf64 testcase of the
tests/lib/cmsis_dsp/transform/
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/52284
Signed-off-by: Francois Ramu <francois.ramu@st.com>
