IPv4/6 fragmentation did not set the net_context pointer on the fragment
packet and in result the send callback registered on net_context was not
called. Therefore, copy the net_context pointer from the original packet
to the final fragment to ensure that the registered callback is called.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Skipping both next_hdr_off and last_hdr_off and filling last_hdr
variable doesn't make much sense, as this effectively moves the packet
cursor inside/behind the last (L4) header with no particular meaning.
Plus the last_hdr variable isn't really used anywhere, which kind of
proves the point. Therefore, remove the unused variable and needless
net_pkt operations.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case the stack has to fragment the IPv6 packet, calculate the
checksum before fragmentation (if haven't done so).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case the stack has to fragment the IPv4 packet, calculate the
checksum before fragmentation (if haven't done so).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Modify internal L4 protocols APIs, to allow to enforce checksum
calculation, regardless of the checksum HW offloading capability.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new net_pkt checksum, which indicate checksum status on the packet
(i. e. whether it has already been calculated or not).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Modified the BabbleSim test for the Bluetooth test under the
host/privacy/peripheral category. Added the RPA check in the scan
callback context of the scanning tester device to validate if the
DUT advertising address is correct.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Extended the scope of the BabbleSim test for the Bluetooth test under
the host/privacy/peripheral category. The tests ensures correct RPA
advertising after the system a reboot when the Bluetooth identities
are preloaded from the Settings subsystem.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This change fixes uninitialized RPA values for advertising sets of
non-default Bluetooth identities. The regression has been introduced
in the following commit:
8d6b206064
The follow-up fix for the default Bluetooth identity has been
introduced in a separate commit:
88c20b9cdd
Non-default Bluetooth identities can be loaded from the Settings
subsystem. In this case, RPAs of related advertising sets to these
identities are left uninitialized as the bt_id_create() function
context is not executed. As a result, the RPA is not created for
advertising sets of non-default Bluetooth identities, and the
advertising is started with the 00:00:00:00:00:00 address.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Enables setting the initialization priority of the nPM1300 independently
from other MFDs.
Signed-off-by: Bernt Johan Damslora <Bernt.Damslora@nordicsemi.no>
Enables setting the initialization priority of the nPM6001 independently
from other MFDs.
Signed-off-by: Bernt Johan Damslora <Bernt.Damslora@nordicsemi.no>
Added initial version of Infineon AIROC WIFI driver
Added initial version of binding file for Infineon AIROC WIFI
driver
Rename CONFIG_ABSTRACTION_RTOS_COMPONENT_ZEPHYR to
CONFIG_USE_INFINEON_ABSTRACTION_RTOS
Exclude cy8cproto_062_4343w platform from
drivers.modem.esp_at.build test
Change revision hal_infineon to
69c883d3bd9fac8a18dd8384624b8c472a68d06f
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Added initial version of Infineon CAT1 SDHC/SDIO driver
Added initial version of binding file for Infineon CAT1 SDHC/SDIO
driver
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
1. remove the line number check in test vector
2. log_info is not a static method anymore, change test
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
With CSL enabled, when nrf5_stop is called,
nrf_802154_sleep_if_idle() will be called, and if the radio is
busy with another task, another IEEE802154_EVENT_RX_OFF event
will be pended right away, resulting in another call
to nrf5_stop(), effectively busy waiting until the
radio has reached idle.
In simulation, this whole operation (busy wait loop) is
done without letting the CPU sleep, in an infinite loop,
and therefore without letting any time pass
(note that in the POSIX architecture,
no time passes if the CPU does not go to sleep).
And therefore the radio will never be done with whatever
it is doing, resulting in the simulation being stuck
in this loop.
Let's add a very minor delay to this loop, which is
conditionally compiled only for the POSIX architecture.
Which effectively mimics the time it takes for the CPU
to loop thru, let's time pass, and allows the radio
to eventually be done.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
MDIO is currently initialized in the ETH NXP S32 NETC
driver for Physical Station Interface (PSI), so do not
try to build the MDIO driver if the ETH driver is not built
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
There is no require to prevent building nxp s32 netc
shim driver if NET_TEST is set, so just remove this
unnecessary dependency
Fix#64944
Signed-off-by: Dat Nguyen Duy <dat.nguyenduy@nxp.com>
Adds a note about how to replicate the functionality of the now
removed MCUboot mass erase Kconfig option
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
"cmake/extensions.cmake" does not exist. The link is broken.
Fix it to correct one "cmake/modules/extensions.cmake".
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Moves the USB CDC device to the USB CDC port instead of wrongly
using the serial port, this was not used but is needed to prevent a
build error added to MCUboot which prevents using the same device
for console and serial recovery chosen nodes
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This board HW models do not yet support the NFCT peripheral,
let's remove the DT node to avoid the driver being selected.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* Update the HW models module to
a715dcc179f1a71f51c574165958b72fe932ae3f
Including the following:
* a715dcc irq_ctrl: Fix interrupt name getter
* b9e1f00 Makefile: For 5340 build both HAL versions as separate libraries
* 68aa50b Makefile: Set default target to compile and fix makefiles rules
* 0cf5ea9 nrfx_glue: Provide a stubbed NRFX_DELAY for builds without Zephyr
* b0d95c2 doc: Update required Nordic nrfx version to 3.2
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
On-Demand proxy client API has been changed but
usage of this API in shell test was missed.
Commit fixes this API usage.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The ability to send the solicitation PDU doesn't
depend on GATT Client role.
Commit makes independent one functionality from
another.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Add a property for I2C channel switch selection. This property will
write to the SMBxxCHS register according to the I2C node you selected,
which can make channel swapping.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This patch allow demonstrating fat_fs sample application on
stm32h747i-disco board with SD card.
Build fs_sample using following command
west build -p always -b stm32h747i_disco_m7 \
samples/subsys/fs/fs_sample
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
Remove unnecessary newline characters from shell_print, it already adds
them. Align the table pipe characters better in the list of modules.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The memory usage shown in the shell was 0 which is obviously incorrect.
At some point the memory allocation tracking was dropped from llext.c
mistakenly. Add it back.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Reduce the heap and stack sizes needed for the shell loader sample app
so more devices may try it out.
Tried on a mimxrt1010_evk and noted the total ram usage was
approximately 44000 bytes. Prior to this change the mimxrt1010_evk was
unable to run the sample as the bss section overflowed the ram size.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Some platforms already have .bss section zeroed-out externally before the
Zephyr initialization and there is no sence to zero it out the second time
from the SW.
Such boot-time optimization could be critical e.g. for RTL Simulation.
Signed-off-by: Alexander Razinkov <alexander.razinkov@syntacore.com>
Update the inter-node dependencies documentation to clarify the child
node dependency inheritance recently introduced in 403640b75e.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.
The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics and defining the driver's ISR within the shim
driver itself.
Note that for some peripheral instances is needed to redefine the
HAL macros of the peripheral base address, since the naming is not
uniform for all instances.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
This patch removes the now unused scratch partition and enlarges
the application slots instead.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
