Change adds missing Kconfig dependency.
The CONFIG_BT_CTLR_FILTER is used only for SW Link Layers.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Bluetooth sample with controller crypto, requires sys_rand32_get that
used to be linked with Tinycrypt. The selection, within Kconfig of
Tinycrypt, that has been enabling compilation of the symbol has
been removed and thus preventing controller crypto to link.
This commit moves the selection to BT_CTLR_CRYPTO.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix CONFIG_BT_CTLR_TX_BUFFER_SIZE value range to 251 Bytes
due to implementation limitation in use of u8_t for PDU
length fields in controller Tx buffers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This change prevents zephyr LL specific configurations to show up when
using an out of tree BLE controller.
BT_CTLR_ASSERT_HANDLER is used outside the controller as well,
so this is kept as is.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Added Kconfig option to conditionally compile in HCI command
parameter validation code.
When building a combined host plus controller application,
only validations in the host at the top level close to the
API caller is sufficient.
The controller validations are included in controller only
builds.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit targets solving issue #17731 over the LL_SW_SPLIT
arch of the BLE stack in Zephyr. This functionality is exposed
to the user as HCI Zephyr Command extensions
- BT_HCI_OP_VS_WRITE_TX_POWER_LEVEL
- BT_HCI_OP_VS_READ_TX_POWER_LEVEL
which enable Tx power read/write operations within BLE radio events
on a per role/connection basis.
The functionality is enabled upon the Kconfig advanced configuration
triggered by
- BT_CTLR_TX_PWR_DYNAMIC_CONTROL
depending on the enablement of Zephyr HCI vendor-specific command
extensions.
Necessary low-level radio HAL functionality and power definitions
are also supplied to address the high-level functionality of
controlling the Tx power.
Signed-off-by: Andrei Stoica <stoica.razvan.andrei@gmail.com>
Add support for Zero Latency IRQs, which avoids any Zephyr
OS or application influenced ISR latencies on the
controller's ISRs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the regression introduced as part of
commit 57d9411837 ("bluetooth: kconfig: disable some
options for openisa/RV32M1").
Also, prior to PR that introduced this regression, the Coded
PHY support selection was incorrectly depending on PHY update
support Kconfig BT_PHY_UPDATE. This was already fixed as part
the previous PR.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit enables support in bluetooth/controller/Kconfig
for nRF53 series of SoCs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
nRF5340 does not support a Radio TX power of 4dBm, so we
introduce a dependency for the respective Kconfig option
for TX power, so the option is never defined for nRF5340.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The Company ID concept is not restricted to the controller, and should
be part of the wider Bluetooth scope, so it can be used on a
controller-less device. It's used in multiple host level modules, most
notably the Bluetooth Mesh and Device Information Service.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Some Bluetooth options are currently not supported by the experimental
BLE SW LL implementation done on VEGABoard. As such, hide them from
the user altogether.
The full list of disabled config options is as follows:
- CONFIG_BT_PHY_UPDATE
- CONFIG_BT_DATA_LEN_UPDATE
- CONFIG_BT_HCI_VS
- CONFIG_BT_CTLR_LE_ENC
- CONFIG_BT_CTLR_CONN_PARAM_REQ
- CONFIG_BT_CTLR_EXT_REJ_IND
- CONFIG_BT_CTLR_SLAVE_FEAT_REQ
- CONFIG_BT_CTLR_LE_PING
- CONFIG_BT_CTLR_PRIVACY
- CONFIG_BT_CTLR_EXT_SCAN_FP
- CONFIG_BT_CTLR_CHAN_SEL_2
- CONFIG_BT_CTLR_ADV_EXT
- CONFIG_BT_CTLR_XTAL_ADVANCED
- CONFIG_BT_CTLR_SCHED_ADVANCED
- CONFIG_BT_CTLR_TIFS_HW
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
This patch updates the config files required to enable the
BLE SW defined controller to be built on RV32M1 SoCs. Only the split
version is supported.
Signed-off-by: George Stefan <george.stefan@nxp.com>
Signed-off-by: Radu Alexe <radu.alexe@nxp.com>
Signed-off-by: Ionut Ursescu <ionut.ursescu@nxp.com>
Having a pin toggle when the code reaches a certain point
is really useful for debugging; the infrastructure is already
in place for Nordic boards, so just build upon and enable the
mechanism on the Vega board as well.
Signed-off-by: David Leach <david.leach@nxp.com>
A single connections may take up to 4 buffers at the same time. Make
number of connections that support this worst-case number
configurable.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added in commit 1475402d41 ("Bluetooth: controller: Introduce ULL LLL
architecture"), then never used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix Kconfig conditional include of Minimum Channels Used
and Channel Selection Algorithm #2.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added support for vendor specific meta data in LLL node_rx_hdr. This
enables vendors to add "footer" data to the RX PDU, for supporting
specialized BLE features.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Added support for vendor specific meta data in LLL conn object. This
enables vendors to add state data to connection, for supporting
specialized BLE slave features.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When not using ticker compatibility mode in legacy
controller, ticker job should not be disabled inside radio
events.
Ticker compatibility mode was introduced in
commit 3a9173afe1 ("bluetooth: controller: Revised ticker
for improved conflict resolution").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Nordic nRF52811 SoC has a 2.4GHx Radio which supports
LE Coded PHY, so we add the option to build a BLE
Controller for nRF52811 platforms with LE Coded PHY
support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Changed documentation in Bluetooth Controller
Kconfig for BT_CTLR_ASSERT_HANDLER
Signed-off-by: Kristoffer Rist Skøien <kristoffer.skoien@nordicsemi.no>
Disable Advertising Extensions by default, since they are not really
operational and they take RAM.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Changed ticker behavior to resolve conflicts in ticker_worker instead of
in ticker_job. This allows better real-time slot allocation, as well as
allowing callbacks even if ticker node doesn't get air-time (for audio
stream housekeeping). A priority property now also allows prioritizing
one ticker node over others.
Compatibility mode enables lagacy ticker behavior if needed.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Enable use of settings system in controller and introduce settings for
company_id and subversion_number.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Make the Upper and Lower Link Layer split architecture
implementation of the controller as the default when
building Zephyr Bluetooth Low Energy controller support
in applications.
Noticeable missing feature (porting) in comparison to old
architecture implementation is, Advanced scheduling of
connection events.
The missing features will subsequently be submitted
upstream.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename the controller Kconfig option BT_LL_SW to
BT_LL_SW_LEGACY in preparation towards switch to new Link
Layer implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable the Fast Encryption design and connection RSSI
measurement when CONFIG_BT_HCI_RAW is selected.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Renames the "Blueooth Controller Assertion Handler" to "Application
Defined Assertion Handler" to better fit the purpose of the Kconfig
option.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Added a fix handling L2CAP start frame with payload length
of zero which otherwise sent zero length data start PDU on
air.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implements hooks to implement user protocols in ull.c
A user defined init function can now be called, this code is gated by
the CONFIG_BT_CTLR_USER_EXT define.
A user defined PDU length can now also be defined using the Kconfig
CONFIG_BT_RX_USER_PDU_LEN
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Fix shell app regression due to stale tmp role implementation
not fully being removed in commit 4c77bf6194 ("Bluetooth:
controller: Remove redundant tmp role implementation").
The regression caused ticker indexes outside of allocations to
be accessed causing application faults and memory corruptions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Code refactored to allow calling of a proprietary rx demux function.
This will enable implementation of proprietary protocols and
functionality that is not yet public, while keeping a common zephyr
code base.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Disable the unsupported controller privacy feature in the
ULL/LLL split architecture implementation.
This feature will be enabled in the future when it has been
ported to support multiple vendor SoCs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable the support for Zephyr HCI Vendor-Specific Commands
and Event in the ULL/LLL split architecture implementation
of the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Kconfig default values for ULL and LLL execution
priorities that caused build warnings when ranges changes
based on other priority values being selected.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added prompt to BT_CTLR_RX_PRIO_STACK_SIZE, allowing vendor specific
configuration of high priority Rx thread stack size for
!SOC_COMPATIBLE_NRF.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Implement a lower ISR latency ULL processing design. Instead
of looping use ISR/mayfly tail-chaining to process
successive ULL messages.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added Kconfig BT_MAYFLY_YIELD_AFTER_CALL to support vendor requirement
of invoking all outstanding mayflies for a given callee in
mayfly_run().
Signed-off-by: Morten Priess <mtpr@oticon.com>
The 2M and Coded PHY bit should not be set when the
PHY update procedure is not supported.
Fixes#14658
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
