Some non-ASCII characters were used in code comments.
Change-Id: Ie00e0b7d7a42a50503c601225cdd0896c375dee3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds reading of included service attribute 128bit UUID.
The limitation of this solution is that if several attr handle-range
pairs will be received, this will read first attribute UUID and then
start discovery from the the succeeding handle.
ZEP-373
Discovery related test results:
2/76 GATT TC_GAD_CL_BV_02_C PASS
3/76 GATT TC_GAD_CL_BV_03_C PASS
4/76 GATT TC_GAD_CL_BV_04_C PASS
5/76 GATT TC_GAD_CL_BV_05_C PASS
6/76 GATT TC_GAD_CL_BV_06_C PASS
Change-Id: I27185b3a3ae96c9c03b0f356492df18ba83b183a
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
16 bit handles have to be converted to host order.
Change-Id: Iae5d9d79bacd90cd5b42a98d02165ec75bf1272e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds flags parameter to write callback which can be used to indicate
that data only need to be prepared with use of BT_GATT_WRITE_FLAG_PREPARE
fixing qualification tests that needs to check authorization or other
errors that cannot be verified with just the permissions.
Change-Id: I3d662b2027718ffb52a280e3bbc9750be14f89ae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The ccc config clear logic should only clear its own cfg value if it is not
bonded and not the other ones.
Change-Id: I1b053b714744bdfb61fdbb445c08dffd3c9e1a1f
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
* clear non-bonded ccc cfg values as per BT spec
* address compare logic
* check if cfg_changed is defined
Change-Id: Id002f22a6aac1b918d743ef1e73b7e5c4768a229
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
This makes bt_gatt_write similar to bt_gatt_read where the parameters are
stored in a struct which can be used to store intermediate values while
the operation is in progress.
Change-Id: I3c62af137b99985690cf88dcc37a977a0be891f5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Code shall not have more than 80 columns.
Change-Id: I2ba53c971be1d6936b5092d86c1e2196c100339e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
* service include macro definition takes reference to
first service attribute of the included service
Change-Id: Ib2b1defe2c99aea738da791af74a534d56025eae
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
Primary and secondary service attributes discovery uses att_find_type,
include service and characteristic uses att_read_type.
Change-Id: Ia3539b446a4afb5c72bc1aba443167be6f893d0d
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
This reverts commit 3d08d16780.
The Read Response only contains a Characteristic Value that is less than or
equal to (ATT_MTU – 1) octets in length so, condition
(length < bt_att_get_mtu(conn)) is always true, and the full Characteristic
Value will not be read.
Change-Id: I63280e65b4ff5b830295aa9aadebe2758b626912
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
There will be other uses, so rename this to bt_addr_le_is_bonded and
export it through hci_core.h.
Change-Id: Ia033a215255f2ec2e513c785dd1b9862faaf5ac8
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some devices may actually lose track of CCC setting so this is required
to work around the problem, in case the device does work track CCC
properly the extra write shall not cause anything more than one extra
round trip thus it is probably work doing it anyway.
Change-Id: I9e5ed3fa459e4617c6fae094d0ce0f80cb2682e4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Read Response only contains a Characteristic Value that is less
than or equal to (ATT_MTU – 1) octets in length. Include also equal.
Change-Id: I139d1460159aafa2187e04cddd8df57d42807c67
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This uses ATT Indicate Value command to indicate changes and wait for
confirmation response.
Change-Id: I123a00e374929d779f96a02440215c32c0e79423
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Next discovery for primary and secondary services shall start from the
next handle.
Change-Id: I8bc7ccd9a84848d75b2d9ef0484429599b0c750f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Since the return value of these callbacks is a number of bytes ssize_t
is more appropriate than int.
Change-Id: I3406fb382975d62f51e7a195666d0ae88364fd2c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Keys storage is present also for non bonded devices. Add helper
that checks for actual keys being present in storage that may be
used inline.
Change-Id: Icfc758e3ac89e88ca48948e5193878cf5689611a
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Introduce BT_GATT_ERR macro to make it possible for application
callbacks to return exact ATT error codes.
Change-Id: I971536508e75036fbddc40b3f33e5201e11940bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In preparation of creating a public att.h rename the existing internal
header appropriately.
Change-Id: I8588712bc5aa57d391c5ce0886c99692e5a2823e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If other peers were present but not in CONNECTED state temporary
connection reference was leaked.
Change-Id: Icc32bfe1a86f92a9d8472991476ebfd26c889d84
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Add read parameters to read callabck
Merge bt_gatt_read_multiple functionality into bt_gatt_read.
This makes it easier for application to handle all types of reads
as same sematics is kept for them.
Instead of destroy callback, call read_func with NULL data to
indicated that read has completed. This makes it clear when
read is completed and parameters used for it are no longer needed.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if read has completed. Since destroy callback
is no longer needed it is removed.
Also note that bt_gatt_read doesn't take any user data parameter
and that destroy callback was acctually called with read parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_read_params.
Change-Id: I8d6ea136b1e61c1dae73cca868b53c48c45a5492
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This removes destroy callback for userdata as bt_gatt_subscribe
doesn't take any user data parameters and that destroy callback
was acctually called with subscribe parameters.
We assume subscription is active if bt_gatt_subscribe returned 0
(ie write command was sent). This is due to remote might be sending
notifications before reply to write.
Also note that bt_gatt_subscribe doesn't take any user data parameters
and that destroy callback was acctually called with subscribe
parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_subscribe_params.
Change-Id: I58ac9cd481ffa08ccc2d7a0464ca75f61fb280c5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Instead of destroy callback, call discovery_func with NULL attribute to
indicated that discovery has completed. This makes it clear when
discovery is completed and parameters used for it are no longer used.
Thanks to this application doesn't need to abuse user data destroy
callback for detecting if discovery has completed.
Also note that bt_gatt_discover doesn't take any user data parameter
and that destroy callback was acctually called with discovery
parameters.
If application would require to pass user data along with parameters
it may use CONTAINER_OF macro along with bt_gatt_discover_params.
Change-Id: Iec4eb9795975ef2555502e13a682e13ff37742e0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Introduce new UUID API with bt_uuid, bt_uuid_16 and bt_uuid_32
structs. The specific size structs are derived from the common bt_uuid
struct to make it possible to use CONTAINER_OF().
Change-Id: I9cb03c73406acb7768d410fdf29eae75d252163c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To access the 16-bit value of GATT UUIDs it's quite overkill to first
create anonymous UUID structs and then access the value member from
them. We can simplify this a lot with the help of the recently added
UUID value definitions.
Change-Id: Ib58012c20d07b3e60e5911cea6feb73301d1323c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This make more sense since the handles are normally self allocated by
the stack.
Change-Id: I198dd9c3ef6259cff8a0e528514918ec18990dea
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This add bt_gatt_attr_next function that can be used to iterate to next
attribute which is convenient if original attribute is known and using
bt_gatt_foreach_attr would require a lookup and another function to pass
as callback.
Change-Id: I1bd522fd4ae784e08aa375b35320191cbfc03a54
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enable applications to build with a single table representing the
database where attributes don't have to store a pointer to the next
attribute thus reducing its size.
Change-Id: I4c84e2d50f9088a2f9879068890f0646e586e007
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In Read By Type response, GATT Server shall send UUID of a included
service only if this service UUID is 16 bit. Otherwise GATT Client
will send Read Request to get 128 bit UUID.
Fix tested with PTS.
> ACL Data RX: Handle 64 flags 0x02 dlen 11 [hci0] 1125351.430506
ATT: Read By Type Request (0x08) len 6
Handle range: 0x0001-0xffff
Attribute type: Include (0x2802)
< ACL Data TX: Handle 64 flags 0x00 dlen 12 [hci0] 1125351.435346
ATT: Read By Type Response (0x09) len 7
Attribute data length: 6
Attribute data list: 1 entry
Handle: 0x0002
Value: 01000200
> ACL Data RX: Handle 64 flags 0x02 dlen 7 [hci0] 1125351.605504
ATT: Read Request (0x0a) len 2
Handle: 0x0001
< ACL Data TX: Handle 64 flags 0x00 dlen 21 [hci0] 1125351.613432
ATT: Read Response (0x0b) len 16
Value: efcdab89674523b10040510450aa00f0
Change-Id: Ie07ec7930663b04dc134ee1c5a95c4e0670f5926
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
In order to support more standard descriptors, the PF macro and helper
function are added.
Change-Id: I52db3c32f40f39b9c6bfdb9573d0a614d0f3295e
Signed-off-by: Louis Caron <louis.caron@intel.com>
In order to support more standard descriptors, the UD macro and helper
function are added.
Change-Id: Ic9a82658668107b40abc5c98002fe5091dc10f08
Signed-off-by: Louis Caron <louis.caron@intel.com>
This patch replaces bt_gatt_attr_func_t with bt_gatt_discover_func_t
to be used as a type of discovery callback. The reason is
bt_gatt_attr_func_t don't return bt_conn which could be used
later on to issue other commands and to application to know
from which connection this results come.
Change-Id: I1f26c72ad5c8a0b97485a337c7005d34281586d7
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This makes it simpler to add the services directly into GATT services
table.
Change-Id: I090c7f9396329cf524947dd6647230c663a55f60
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch fixes the calculation of maximum data that can be sent
by Write Request.
Maximum data is MTU reduced by size of handle and command opcode.
Change-Id: I2abeef9adffd65e24a2489ad084bfa3b810e4acf
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Make newline part of log macros so that caller doesn't have to
append '\n' every time logs are used. This make sure that no
log will be missing new line which results in concatenated log
messages.
Change-Id: I3231ae747c790816dbc1608e0a3bd56467ba0a1b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This patch adds missing return call. Destroy was called early,
on read params. This could result in memory violation.
Another thing that has been fixed is assignment of bt_gatt_read
return value which can be negative to uint8_t type.
Change-Id: I1ddfea03038538efd70ad8ac68bd8df308a4ee3c
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
With this patch application can unsubscribe notifications
from Subscribe value callback directly, if BT_GATT_ITER_STOP
is returned.
Change-Id: I7873594f5dbe6e8c5bef11bf397a74cdc870a464
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patch refactor reading of attribute values as a client.
Current MTU size is taken into account to determine if read
procedure has been completed or not.
For now, read procedure will be continued until whole is read,
or stopped by client.
Core Specification says that "The Read Blob Request is repeated
until the Read Blob Response’s Part Attribute Value parameter is
shorter than (ATT_MTU – 1)." (Vol 3, Part G 4.8.3)
Because application didn't know the current MTU value,
there was no way to determine if data received is complete.
Change-Id: I9d0e3f8638b58c3a4e39060333aedc133b775e3d
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
It's more intuitive to specify needed MTU sizes instead of raw buffer
sizes. The exact buffer size calculations can instead be made
internally in the code (using the BT_L2CAP_BUF_SIZE helper macro).
Change-Id: I0637340a7d99e04020f57f49ecd8e6dcfcc4bcf4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Isolates existing LE connection specific attributes and
prepares for now empty BR/EDR specific connection internals.
Change-Id: Ib423306fbf60e8451998e3933aee00cb672a1106
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
There's no need to maintain a separate module for this anymore.
Subsequent patches will have further simplifications thanks to this
being now handled in a single c-file.
Change-Id: I4510c9f72b121e1e5fd19eeb8b5d5ddf2f4bfffe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert the code to use the net_buf API instead of the soon to be
removed bt_buf API.
Change-Id: I9437750aa6fffcde31e1879bf6e3a13143f45480
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes BT_GATT_CHARACTERISTIC declare a local bt_gatt_chrc so the
applications don't need to declare themselves.
Change-Id: Icf3fad7dffea5667c6f13aa022a5722900da51e8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
