Applications should be able to update the connection parameters.
Change-Id: I446f64fcd0b27b605e636e566fb35a362a92de96
Signed-off-by: Louis Caron <louis.caron@intel.com>
Fix assigning negative error code to unsigned int and then compare it
against zero.
Change-Id: Idedaf91dda20a38806ee81d5c488ae8b46c8feff
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
For size_t it is hard to be negative in the following check
...
if (!data || len < 0)
...
Change-Id: Ib995d568e10aa1e3cbaf28f46d267addb876f073
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Since RPC to the NBLE is designed in a such a way that it is nearly
impossible to find out which packet received, create debug tables in
debug configuration. The tables store strings of function names
referenced by function index in a table, created the same way as RPC.
Sample output is:
...
bt: rpc_deserialize (0xa80082c4): on_nble_up
...
Change-Id: Ic91fcf73753aa9b78bdbacd5c8a0279823a4679e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This is the MTU supported by the firmware and is necessary in order to
register bigger services such as vendor specific in the peripheral
sample.
Change-Id: I24b2f9e983d8e2da22d41a40f538f0daf7d526d0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There could be commands that depend on the firmware version the stack
needs to wait until version is complete.
Change-Id: If8ded19c4cd4eb3c33df64b3cde29da11b0de8df
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Following change in NBLE firmware update interfaces and structures.
Change-Id: I47df2374961d13fabc54ee8e446a155a65999072
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Currently the nble implementation doesn't support advertising with an
NRPA.
Change-Id: I80e3e2a72d73d23f37966eb429a8ffb8d8c50bf5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In anticipation of supporting a local static random address in the
future it makes more sense to call BT_LE_ADV_ADDR_PUBLIC
BT_LE_ADV_ADDR_IDENTITY.
Change-Id: I4826f1dfb50b54e13a35cbe7ee74e28641c81ad1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enabling BLUETOOTH_DEBUG enables also serial console conflicting with
tester reusing the same UART.
Change-Id: I8058a019e61146ff05cc44ab543cf6ec9ff418ef
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use pointers instead of potentially unused var.
Change-Id: I07bcb788b0f9e5e100c913c48d7d38464565157a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implementing on_ble_get_version_rsp() allows to check firmware version
of Nordic BLE chip.
Current output is (stripped):
...
bt: on_ble_get_version_rsp: VERSION: 0.0.0 ATP1BLE000-1604C5546
...
Change-Id: I98d3cd659cbed86b31eb90aac0e3ae876daf616a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
!BLUETOOTH is almost always when not using BLE, so depend
on NBLE being configured as well to set various options.
Change-Id: Idc61cee277fe0f09086a9f2ed6eb419aee5fd69c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reuses the existing code since that is not driver specific, with
this samples such as tester can be build using nble driver.
Change-Id: I6d9f3edf8deb2e84fce233ef02d1cd0ad6f52526
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There are situations when nble_read() might stuck reading from UART when
there is no data. Limit number of tries to 10.
Change-Id: I23380b622439ce9fa72b05f4eb527f03c749fce8
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implement using printf(), to make correct stack use define check.
Change-Id: I81894ccb511f921a5fcff37d85790191251d683f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Since the headers defining RPC with Nordic chip changes frequently
define weak functions printing BT_WARN("Not implemented") if
function is not defined.
Weak function symbol is marked with "W" as viewed by nm.
Change-Id: Ia39b64c6e89fdddc65683711fd192a235fe754d4
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This lowers the chance of running out of buffers when sending or
receiving a lot of data.
Change-Id: Ifedc5652f993fa54f7aded87aef545ffb49e7581
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The RPC code is not net_buf aware so it will not update the net_buf
length when encoding data into it. We have to therefore do it
ourselves.
Change-Id: I7d7d3c09007a2a9bce822625607dbf7470a7ea0b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make code readable removing extra spaces.
Change-Id: I61e3486e1d301ff7d36fd2e34243ff6e9111e54d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove extra spaces and make code readable
Change-Id: I3e57a5440476eb0143d19ce9865d3a76c58b90d1
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Include all functions using previously defined stubs.
Change-Id: If9ab3f02d2e3e1f27c09b0d666fcf531cf76898d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move receiving logic to fiber rx_fiber(). rx_queue is registered with
uart driver and all data is sent there for processing. Clean up old
ipc_channel interface since there will be only one interface to uart
driver.
Change-Id: I292863b1f38e5adb8ca4e6ac63aed09c83de56bf
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Refactored Johan Hedberg's code adding callback to be called when NBLE
is up.
Change-Id: I2a8a2238942c0adae2a5c47cfe94d8f2b1112810
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Refactored Johan Hedberg's code adding writing to NBLE_BTWAKE_PIN one
to drive it high, needed to wake up NBLE chip.
Change-Id: I63b9583281db897f2326e4570716c25ce181128f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Port RPC deserialization to Zephyr upstream.
Change-Id: Icc9e055565185e907f51832443386f929a752586
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Port RPC Serialization to Zephyr upstream
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Change-Id: I315d52dc6576254a6928520d1353856d41a25c69
Resets Nordic BLE chip and opens communication channel to UART.
Change-Id: Ie516869a4d978fc1622361ebc42894430fdf9ea6
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Adds basic support for communication with Nordic BLE (NBLE) chip
connected to UART.
Change-Id: I3651e291ec18805a63ecd3d240dce62273e3c498
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
NBLE defaults (eg for BLUETOOTH_MAX_PAIRED) were not limited to
!BLUETOOTH and resulted in overwriting BLUETOOTH defaults.
Change-Id: I1e4a90c00c15252bb3db927b42641f9a479f4aa6
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Select cannot be used for int type of variable. This will stil work
correctly as default value is provided. Fix following:
drivers/nble/Kconfig:50:warning: 'BLUETOOTH_MAX_PAIRED' has wrong type.
'select' only accept arguments of boolean and tristate type
Change-Id: I15951a3ba9efa11e1c18a1e90eb708ced08ad357
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This makes it easier to port samples which may use
CONFIG_BLUETOOTH_MAX_PAIRED.
Change-Id: I3e37df7cae63a4ac2219ce26408ae4d4f987645d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This make more sense since the handles are normally self allocated by
the stack.
Change-Id: I198dd9c3ef6259cff8a0e528514918ec18990dea
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add API definition and stubs for directed advertising.
Change-Id: Ib22d3acb6d2e76b0c638b26b8e07860cd189f640
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
All of the authentication APIs deal with bt_conn objects. For
consistency it makes therefore sense to use the proper bt_conn name
space with them.
Change-Id: I47912d542373df511524cc6ad2532d6c9a76ca68
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
