Applications should be able to update the connection parameters.
Change-Id: I446f64fcd0b27b605e636e566fb35a362a92de96
Signed-off-by: Louis Caron <louis.caron@intel.com>
Fix assigning negative error code to unsigned int and then compare it
against zero.
Change-Id: Idedaf91dda20a38806ee81d5c488ae8b46c8feff
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
For size_t it is hard to be negative in the following check
...
if (!data || len < 0)
...
Change-Id: Ib995d568e10aa1e3cbaf28f46d267addb876f073
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Since RPC to the NBLE is designed in a such a way that it is nearly
impossible to find out which packet received, create debug tables in
debug configuration. The tables store strings of function names
referenced by function index in a table, created the same way as RPC.
Sample output is:
...
bt: rpc_deserialize (0xa80082c4): on_nble_up
...
Change-Id: Ic91fcf73753aa9b78bdbacd5c8a0279823a4679e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This is the MTU supported by the firmware and is necessary in order to
register bigger services such as vendor specific in the peripheral
sample.
Change-Id: I24b2f9e983d8e2da22d41a40f538f0daf7d526d0
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There could be commands that depend on the firmware version the stack
needs to wait until version is complete.
Change-Id: If8ded19c4cd4eb3c33df64b3cde29da11b0de8df
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For non-interrupt transfers poll_out should be used, This fixes data
lost issues on a real UART hardware like Arduino 101 and Galileo
boards.
Change-Id: Ic7a5d055941d83f9d62cbea9e911ce25730ed7b6
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Following change in NBLE firmware update interfaces and structures.
Change-Id: I47df2374961d13fabc54ee8e446a155a65999072
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Currently the nble implementation doesn't support advertising with an
NRPA.
Change-Id: I80e3e2a72d73d23f37966eb429a8ffb8d8c50bf5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In anticipation of supporting a local static random address in the
future it makes more sense to call BT_LE_ADV_ADDR_PUBLIC
BT_LE_ADV_ADDR_IDENTITY.
Change-Id: I4826f1dfb50b54e13a35cbe7ee74e28641c81ad1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enabling BLUETOOTH_DEBUG enables also serial console conflicting with
tester reusing the same UART.
Change-Id: I8058a019e61146ff05cc44ab543cf6ec9ff418ef
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use pointers instead of potentially unused var.
Change-Id: I07bcb788b0f9e5e100c913c48d7d38464565157a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
got the following compilation error when trying
to compile the Synopsys DesignWare Ethernet driver:
In file included from drivers/ethernet/eth_dw.c:25:0:
drivers/ethernet/eth_dw_priv.h:27:28:
fatal error: contiki/ip/uip.h: No such file or directory
Fixed by adding correct include path in ethernet
Makefile
Change-Id: I8ea50e3ffb89e54349140de124f68d196a412f8e
Signed-off-by: Jean-Paul Etienne <jean-paul.etienne@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There are situations when the transfer starts before we have the time to
enable the CS line, so to be sure, we active it before even attempting
to start the transfer.
This fixes an CC2520 driver initialization issue using the QMSI SPI driver.
Change-Id: Ib9b324b77260ac537f714376c8056b1543e7e3b3
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
For QMSI drivers with combined interrupts, we need to use level
triggered interrupts. This is the case of the GPIO controller.
If we keep it configured as EDGE, the user will never be able to
get a pin configured as LEVEL to fire more than 1 interrupt.
Change-Id: I36bffc79183ca97f431c4f5811ed5d56e2fd82e8
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
config_info data comes after driver_data (though the first one is
usually the one you use first, but anyway).
Fixes a bug introduced by my commit id
3eade319e878c7e11faf4cd93a99d33737e16e6c
Change-Id: I3f58b7fd9605270bb6edf24ae0d129313ac9ab2f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Because of the necessity of using a GPIO pin as Chip Select, we need to
set the initialization priority of the SPI driver so it occurs after the
GPIO driver.
Change-Id: I02d675d8267ee07b267155a3806be85fbf57378c
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
There are cases that it is needed to use a GPIO pin as chip
select (frames would be too long, for example), so using a GPIO pin as
chip select to keep the line active while the transfer is ongoing is the
usual solution.
This implements that solution for the QMSI shim driver.
Change-Id: Ia6b8f0f17161e20f87ad3def1468fe0abea65fdc
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This driver uses the QMSI library and mostly translates calls from the
Zephyr API to QMSI ones.
This driver conflicts with the native driver implemenation. In order to
enable it, you must set:
CONFIG_QMSI_DRIVERS=y
CONFIG_QMSI_INSTALL_PATH="PATH_TO_QMSI"
CONFIG_SPI_QMSI=y
CONFIG_SPI_QMSI_PORT_0=y
CONFIG_SPI_QMSI_PORT_1=y
Missing:
- Support for using a GPIO pin as Chip Select;
Change-Id: I0d8eca88a2a803b6b3604f396f874313fe90753c
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The PIO controllers on Atmel SAM3 family processors can be
used for GPIOs, so this is the driver.
Change-Id: I3d5712f3a0a71025b820ca1c08dd767ee1e136d8
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Due to an issue with the interrupt-based transfer API from QMSI driver,
the 'transfer' callback from the shim driver (i2c_qmsi_transfer) is
implemented with polling APIs. This is not ideal because we are not able
to sleep the current thread (so another task can be scheduled in) while
the i2c operation is carried out.
The interrupt issue with the QMSI driver has been solved then this patch
fixes the shim driver so it uses the interrupt-based API and adds extra
code to handle the thread synchronization.
Finally, this patch also moves all 'struct device' related definitions
from the bottom to the top of the i2c_qmsi.c file so the DEVICE_GET
macro can be used in transfer_complete() and removes the init.h include
since it is not needed anymore.
Change-Id: I7ef7ce4cea6fcc939e310e5fe12c406645f6a16e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Currently, the I2C QMSI shim driver supports only the "I2C 0"
controller instance. This patch extends the driver so it supports
the "I2C 1" instance as well.
The controller instances can be enabled independently.
Change-Id: Ieb64df46816026f3f4fb262a1682c98ee36bedd5
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
IRQAGENT3 is initialized explicitly, but IRQAGENT0 isn't and its value
is based on the value the BIOS or bootloader had set before. Fix this by
explicitly initializing IRQAGENT0, and swizzle the IRQs to reduce
conflicts.
Update the pci_pin2irq function to accommodate for these changes.
Also remove pci_irq2pin function since it is unused.
Change-Id: I7b1dfc7659ab227fe66711a3af5a1f34fd4a7972
Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Ido Yariv <ido@wizery.com>
Adds a Kconfig for setting IRQ priority, and set the default to 3.
This fixes an issue where the interrupt vector as placed in wrong
slot in the IDT table since the priority was zero, and thus
no interrupts from the comparator was received by ISR.
Change-Id: Ief2100c1d79e42f8cedc4e0ca21ed5f6970d62e2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This makes the aio_dw_comparator driver to follow others by using Kconfig
to define device name. This makes using the device in apps a bit easier.
Change-Id: I4fbcb0c009c863a2216a15a78a8aa6324d95690b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Implementing on_ble_get_version_rsp() allows to check firmware version
of Nordic BLE chip.
Current output is (stripped):
...
bt: on_ble_get_version_rsp: VERSION: 0.0.0 ATP1BLE000-1604C5546
...
Change-Id: I98d3cd659cbed86b31eb90aac0e3ae876daf616a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
!BLUETOOTH is almost always when not using BLE, so depend
on NBLE being configured as well to set various options.
Change-Id: Idc61cee277fe0f09086a9f2ed6eb419aee5fd69c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reuses the existing code since that is not driver specific, with
this samples such as tester can be build using nble driver.
Change-Id: I6d9f3edf8deb2e84fce233ef02d1cd0ad6f52526
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There are situations when nble_read() might stuck reading from UART when
there is no data. Limit number of tries to 10.
Change-Id: I23380b622439ce9fa72b05f4eb527f03c749fce8
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implement using printf(), to make correct stack use define check.
Change-Id: I81894ccb511f921a5fcff37d85790191251d683f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Since the headers defining RPC with Nordic chip changes frequently
define weak functions printing BT_WARN("Not implemented") if
function is not defined.
Weak function symbol is marked with "W" as viewed by nm.
Change-Id: Ia39b64c6e89fdddc65683711fd192a235fe754d4
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This lowers the chance of running out of buffers when sending or
receiving a lot of data.
Change-Id: Ifedc5652f993fa54f7aded87aef545ffb49e7581
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The RPC code is not net_buf aware so it will not update the net_buf
length when encoding data into it. We have to therefore do it
ourselves.
Change-Id: I7d7d3c09007a2a9bce822625607dbf7470a7ea0b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make code readable removing extra spaces.
Change-Id: I61e3486e1d301ff7d36fd2e34243ff6e9111e54d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove extra spaces and make code readable
Change-Id: I3e57a5440476eb0143d19ce9865d3a76c58b90d1
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Include all functions using previously defined stubs.
Change-Id: If9ab3f02d2e3e1f27c09b0d666fcf531cf76898d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move receiving logic to fiber rx_fiber(). rx_queue is registered with
uart driver and all data is sent there for processing. Clean up old
ipc_channel interface since there will be only one interface to uart
driver.
Change-Id: I292863b1f38e5adb8ca4e6ac63aed09c83de56bf
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Refactored Johan Hedberg's code adding callback to be called when NBLE
is up.
Change-Id: I2a8a2238942c0adae2a5c47cfe94d8f2b1112810
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Refactored Johan Hedberg's code adding writing to NBLE_BTWAKE_PIN one
to drive it high, needed to wake up NBLE chip.
Change-Id: I63b9583281db897f2326e4570716c25ce181128f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
