F0: from version v1.11.1 to version v1.11.2
F1: from version v1.8.2 to version v1.8.3
F2: from version v1.9.1 to version v1.9.2
F3: from version v1.11.1 to version v1.11.2
F4: from version v1.25.1 to version v1.25.2
L0: from version v1.11.3 to version v1.12.0
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Commits affecting Zephyr that are included with the new revision:
99f9fd6 img_mgmt: Use IMG_MGMT_BOOT_CURR_SLOT as current running
slot ID (enhancement)
6f52fd9 zephyr: fix initialization of file struct (bug fix)
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Mcuboot was updated to the version synchronized with
the upstream 5b7ed6a which introduces:
- Added LED support for signaling enter to the serial recovery mode
- Added boot delay/debonuce of serial detect pin.
- Fixed compilation warnings with ZEPHYR_LOG_MODE_MINIMAL
- Added optional check which prevents attempting to boot image that
has been build for different ROM address than a slot it currently
resides in. Check is enabled if image was signed with
IMAGE_F_ROM_FIXED flag.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This commit moves all hal_nordic radio driver code that is
strictly dependent on Zephyr into the Zephyr repository.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
There is a hardcoded macro in Winc1500 HAL SPI driver
that would prevent the driver from working.
This macro is now defined only based on KConfig entry.
This KConfig entry is by default not set.
To enable, set "CONFIG_WINC1500_DRV_USE_OLD_SW=y"
in proj.conf or board.conf
Signed-off-by: Raja D. Singh <rdsingh@iotwizards.com>
Commits affecting Zephyr that are included with the new revision:
fb489e1f mgmt: Add support for un-registering a group along with
the same support in img_mgmt
c8151d80 zephyr: Rely on img_mgmt_find_best_area_id to select update
partition
b92aa0b8 Fix encoding usage for halffloat
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adds hal dependencies necessary to introduces STM32G050xx, STM32G051xx,
STM32G061xx, STM32G0C1xx, STM32G0B1xx, and STM32G0B0xx devices.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
* Added implementations of otPlatCAlloc and otPlatFree methods
necessary for the OpenThread in case of using EXTERNAL_HEAP.
* Added CONFIG_OPENTHREAD_DNSSD_SERVER option to allow enabling
OT_DNSS_SERVER feature.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
This commit moves TFM CMakeLists.txt into Zephyr and relocates the
Kconfig.tfm file under the modules/tfm folder.
Updates the manifest to point to related TFM changes.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit brings in several latest bugfixes for the hal_nordic repo.
It also removes a Kconfig entry that these changes yield deprecated.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Mark the PPI/DPPI channels and groups used by the 802.15.4 driver
as occupied and thus unavailable for allocation through nrfx_ppi.
Signed-off-by: Adam Zelik <adam.zelik@nordicsemi.no>
MCUBoot was updated to version with bugfix for issue
which caused that it can not be built if image encryption
was enabled.
fixes#32002
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Update EDTT version to include increased Connection
Parameter Request Procedure test timeout calculations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
MCUboot version with bugfix for following issue:
CONFIG_LOG_MINIMAL was replaced by
CONFIG_LOG_MODE_MINIMAL by
zephyrproject-rtos/zephyr#31404 which
broke MCUboot default build.
fixes#31640
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Update manifest with OpenThread up to commit
'f7825b96'.
It also includes commit fixing Coprocessor
Vendor Hooks Kconfig usage in CMake.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Introduces a new flash driver for the FlexSPI peripheral on i.MX RT
SoCs. The hardware provides a flexible sequence engine (LUT) that
supports various types of external devices, including serial NOR flash,
serial NAND flash, HyperBus (HyperFlash/HyperRAM), and FPGAs. It
supports up to four connected devices in single/dual/quad/octal modes
and provides memory-mapped read/write access to these devices through
the AHB bus.
The driver implementation consists of a shared controller for each
FlexSPI peripheral instance, and protocol-specific device drivers for
each external device. The controller provides a private interface for
multiple devices to access the FlexSPI peripheral registers. FlexSPI
devices provide the public flash driver interface to applications or
subsystems like storage or flash file systems; they also provide
protocol-specific LUT sequences to the controller.
Currently the only device type supported is QSPI NOR flash, but other
types like HyperFlash will be added later.
XIP is not yet supported, as this requires additional work to relocate
code to RAM and managing interrupts.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
MCUboot Synchronized up to:
ce50334
- MCUboot ci: relax signed-off-by checks on forks
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This patch updates hal_nordic module revision to start using RPMsg
Service for serialization of 802.15.4. The serialization module is
implemented in the hal_nordic module.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Move nrfx glue code (nrfx integration files, related Kconfig entries,
and related part of CMakeLists.txt taken from the hal_nordic module)
to modules/hal_nordic/nrfx/ directory.
CMakeLists.txt located in modules/hal_nordic/ is now the main cmake
file for the hal_nordic module. It points back to cmake stuff related
to the nRF IEEE 802.15.4 driver that still remains in that module and
it adds the extracted nrfx part as a subdirectory.
Kconfig.nordic is renamed to Kconfig and moved to modules/hal_nordic/.
It sources nrfx related entries from that separate file.
Update also the manifest to point to accordingly modified hal_nordic
revision.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The update includes support for the
CONFIG_IMG_MGMT_REJECT_DIRECT_XIP_MISMATCHED_SLOT
Kconfig options that enables mcumgr to check uploaded image for correct
base addres of Direct-XIP application, and rejecting upload if
the upload would not be able to boot from offered slot.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add device tree description for qspi node on STM32L4 and
signals on whole family.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Some parts of subsys/dfu/boot code are re-implementations of
what is implemented in the MCUBoot repository.
Mcuboot's repository already provide implementation of function
required for application for interact with the MCUboot.
This patch introduces new MCUBOOT_BOOTUTIL module which covers
common code which is used in the bootloader and the chainnloaded
application.
dfu/boot: use MCUBoot's source code
Module was reworked so it start using MCUBoot's
bootutil_public API instead of copied code.
Reworked boot_is_img_confirmed() used MCUBoot's API
for determine image_ok flag.
mcuboot_shell switchd to use MCUboot's boot_read_swap_state_by_id()
This is MCUBoot function, use it for avoid linking conflict.
test/subsys/mcuboot: fix `test_write_confirm`
dfu/boot library was reworked so it uses MCUboot's bootutil_public
library whenever it can.
The library required that image was marked as copy-done before it
can be pending.
This patch adds such mark which fixes the test.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add the Sound Open Firmware project as a Zephyr module under
modules/audio/sof.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit introduces fixes for nRF IEEE 802.15.4 radio driver and
serialization used by the driver.
Signed-off-by: Pawel Kwiek <pawel.kwiek@nordicsemi.no>
