After several fixes of the re-ordering logic in TCP, the receive queue
works as intended and cleans itself up properly. Previously the default
timeout was 100 ms, which pretty much disables it for real applications.
Increase the timeout to 2 seconds to actually enable it for in practice.
This should help pass much more of the Maxwell Pro tests.
This is the first step before removing the timeout completely.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
In case that CONFIG_BT_AUDIO_UNICAST_CLIENT_ASE_SNK_COUNT or
CONFIG_BT_AUDIO_UNICAST_CLIENT_ASE_SRC_COUNT is set to NULL, the
unicast client implementation in the shell would have compile
warnings, since the arrays would be 0 and we would attempt to
access it some places (or rather the compiler/linker would
think that, but it would never happen at runtime).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Array 'days_in_month' of size 12 may use index value bigger then
count of its elements.
Signed-off-by: PawelX Dobrowolski <pawelx.dobrowolski@intel.com>
Fixes an issue whereby event ID was not checked properly, meaning
that OR'd events would not work as one would expect.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Setting a detected packet family (ipv4 or ipv6) in net_context level
instead in lower layers for AF_PACKET/SOCK_RAW/IPPROTO_RAW type sockets
when sending data.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
Clear the `ATT_CONNECTED` flag when a channel is detached (could be after
an ATT timeout).
Also convert the assert checking it in `chan send` to an `if` test, since
the channel could be disconnected from a different thread than the one
triggering `chan_send`.
Fixes#53247.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Change the BT_AUDIO_ISO logging module to use
log_config_inherit to be consistent with the other LE Audio
logging modules.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The TinyCrypt is the current library used by UpdateHub to perform
SHA-256 integrity check. This refactor code and add support to
mbedTLS library. It changes default library to mbedTLS to use
hardware accelerator when available.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Currently choice for FLASH_AREA_CHECK_INTEGRITY does not have a
denomination. Without that it is not possible select a default
backend hash backend for integrity check at project configuration.
This add a name to allow select flash area check integrity backend.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
ISO Synchronized Receiver only builds do not transmit and
hence may not have any tx buffers allocated in a
Controller, leaving bt_dev.le.acl_pkts semaphore
uninitialized or bt_conn_get_pkts() returning NULL.
Do not use the semaphore if no Tx buffers allocated in a
Controller.
Regression in commit ef19c64f1b ("Bluetooth: host: poll on
CTLR buffers instead of host TX queue").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add common function to handle large GATT reads of strings.
Initialize the buffer pointers in the net_buf which is used for large
GATT reads by bt_tbs_client_read_call_state() and
bt_tbs_client_read_current_calls().
Define the size of the allocated buffer based on the enabled features.
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
The way that the braodcast clause for handling failing
ISO data path would end up in the __ASSERT. It has been
slightly modified to make it use if-else properly.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The direction of a stream/endpoint/parameter has just been
logged as a unsigned integer. This commits adds a
value -> string internal function that would log
BT_AUDIO_DIR_SINK as "sink" and BT_AUDIO_DIR_SOURCE
as "source".
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The old random timer test was not random-looking
enough on some platforms.
Replace with new test which is psuedo-xoshiro.
The generator is still deterministic
and does not depend on entropy at all,
but should look more random for testing.
Change name of generator tree-wide also.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Update the SBS Gauge driver that implements the fuel_gauge API to implement
a set_property function allowing the writing of an SBS word to the
manufacturer access register per the SBS spec.
Includes an update to the SBS Gauge emulator and SBS fuel gauge tests to
weakly verify the code runs.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Fix SBS I2C transfer emulation to accept reads and writes of 16 bit words
as defined by the SBS spec. This change is tested by a following commit
that implements writing and subsequently reading a written SBS property.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Implement and weakly test fetching the manufacturer access word from an SBS
compatible fuel gauge.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
The macro BT_CONN_INTERVAL_TO_MS was used a fair amount
of places, but it often was used with integers. This meant
that sometimes the resulting (integer) value would be
incorrect, as something like 7.5ms interval would not
be properly stored as a integer in millisecond units.
Adding BT_CONN_INTERVAL_TO_US allows users to still use
integers to store the result, but in a more accurate unit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The IPv4 autoconfiguration feature relies on the fact, that autoconf
ARP packets are always prepared by the ARP module. After recent ARP
refactoring though that could no longer be the case due to packet
queueing mechanism. This could lead to net pkt leaks in the autoconf
module.
Fix this by skipping the pending packet queue for autoconf packets.
Since for autoconf ARP requests there's no really a pending packet
to queue, it can be safely avoided. This results in the ARP request
being always sent for the autoconf case, preventing the packet leak.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Check data buffer size and return error if
* buffer size is too small for opaque or string data type
* buffer size is not equal to res data length when data type
is fixed size
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
This fixes possible ASE state race condition. The notification is sent
immediately once the ASE state changed that eliminates a situation where
the state was changed by user action (API function call) when the state
was not yet notified to the remote Unicast Client.
Fixes: BAP/USR/SCC/BV-158-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Check return values from lwm2m_rd_client_pause() and
lwm2m_rd_client_resume() when engine thread suspend is requested.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
From 8.3.3.4.2.1 PE_SNK_Send_Soft_Reset State, Error Recovery
should be performed if a Protocol Error happens during a Data
Role Swap.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Build time check that the number of states initialized
in the state machine array matches the number of enums
used to index said array.
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
Accurate timekeeping is something that is often taken for granted.
However, reliability of timekeeping code is critical for most core
and subsystem code. Furthermore, Many higher-level timekeeping
utilities in Zephyr work off of ticks but there is no way to modify
ticks directly which would require either unnecessary delays in
test code or non-ideal compromises in test coverage.
Since timekeeping is so critical, there should be as few barriers
to testing timekeeping code as possible, while preserving
integrity of the kernel's public interface.
With this, we expose `sys_clock_tick_set()` as a system call only
when `CONFIG_ZTEST` is set, declared within the ztest framework.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
This fixes deadlock that happened waiting for meta data in system
workqueue.
The meta data always get freed in the system workqueue,
so if we're in the same workqueue but there are no immediate
contexts available, there's no chance we'll get one by waiting.
Fixes: #53455
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
