bt_conn_disconnect removes device from autoconnect list and thus
should not be called from le_conn_update when timeouting pending
connection. Also auto connect flag needs to be check on connection
failure to make sure scan is restarted.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Depending on perhiperal advertising interval 3 seconds might not be
enough and would result in cancelling pending connection. Make this
Kconfig configurable and let application to decide.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This allows to configure desired parameters for peripheral. When set
PPCP characteristic is also added to GAP service. If disabled it is
up to application to controll connection parameters and stack will
only enforce 5 seconds delay before update.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This fixes a few issues with the handling of Connection Parameter
update in the Host:
- starting conn param update timer as master
- ignoring 5 seconds slave timer when calling bt_conn_le_param_update
- starting conn param update timer on every PHY update
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Added implementation to the directed advertising API in the Connection
Management module. Introduced a new connection state for this type of
advertising. The new state is symmetric to the connection state used for
scanning.
Added a new advertising option that can be used to trigger low and high
duty directed advertising. Added macros for default values of
Advertising Parameters, which are used to trigger directed advertising.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
When doing bt_unpair() we need to pass the given identity when
disconnecting and clearing keys, in case all associated pairings were
requested to be cleared.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make it possible to have multiple identity addresses as an LE
peripheral. For central role only the default identity is supported
for now. This also extends the flash storage in a backward compatible
way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a new bt_passkey_set() API that can be used to set a fixed passkey
to be used for pairing. The new API also requires a new Kconfig option
to be enabled first (CONFIG_BT_FIXED_PASSKEY).
Fixes#8350
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Provide proper documentation for all of the authentication callbacks,
and clarify the usage of the cancel callback. Previously the cancel
callback was always required, even though that doesn't necessarily
make sense now that the pairing_complete/failed callbacks exist.
Fixes#8385
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This chunks should be excluded from build if the target application
does not support neither observer not central role.
This helps to reduce the application image size that implement
Peripheral or Broadcaster role.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes a regression introduced in commit 6af5d1cd1f
("Bluetooth: Compress bt_keys struct").
Instead of passing a value zero as the random number, the
value at the RAM address zero was being used by the start
encryption function call. It is now fixed by consistently
using byte-array to store EDiv and Rand values.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There's a bit of unnecessary space in the bt_keys struct. Re-design
some fields for a more compact format, which is particularly helpful
now that the struct gets stored as-is to flash through the settings
API.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's a risk of a deadlock if we use the same pool for ACL fragments
as we use for general ACL TX buffers: all TX buffers are queued up,
and we try to segment one of them, a segment buffer will never become
available. To work around this risk, introduce a dedicated fragment
pool.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
No one was setting this to any other value than its default, which
happens to be the same as BT_BUF_USER_DATA_MIN.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Having these in the beginning of a switch statement without any case
statement makes no sense.
Fixes#6135
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Redesign of the net_buf_simple and net_buf structs, where the data
payload portion is split to a separately allocated chunk of memory. In
practice this means that buf->__buf becomes a pointer from having just
been a marker (empty array) for where the payload begins right after
the meta-data.
Fixes#3283
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It's possible that tx_notify still contains items when a Disconnect
Complete happens. Since the normal path for processing tx_notify is
not taken when the connection is not in CONNECTED state, we must make
sure to process the list latest in conn_cleanup() that's called as one
last thing before the connection object is freed up.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A connection might have gotten disconnected by the time that an ACL
buffer is free up, in which case there is no need to send a HCI
command for it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is necessary in order for k_queue_get to work properly since that
is used with buffer pools which might be used by multiple threads asking
for buffers.
Jira: ZEP-2553
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code in send_frag() depends on being able to allocate a new
pending tx contexts with 100% certainty. We must therefore notify
*all* connections instead of the current one in order to ensure that
there are free contexts available in free_tx.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In case both conn->tx_notify and conn->tx_queue have data in them we
should first process the notify queue and only then new outgoing
packets.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It's possible that the controller will emit the number of completed
packets event before bt_send() returns, or possibly preempt
send_frag() before it manages to call add_pending_tx(). We have to
therefore add the pending TX entry before calling bt_send().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Moving the net_buf_pool objects to a dedicated area lets us access
them by array offset into this area instead of directly by pointer.
This helps reduce the size of net_buf objects by 4 bytes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since more and more code is going to be reused by both the Host and the
Controller, this commit introduces a common/ folder that will contain
everything that is not tied to one of the two components but shared by
them.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Added HCI macros to check LE Features. Also, added test
macros for 2M and Coded PHY support in HCI Controller.
Earlier a common test macro was used between BR/EDR and LE,
but since LE features do not use pages for feature, an
explicit macro for testing LE feature is added now.
Also, features field in LE device structure is now a single
dimension array of 8 octets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This function already has an 'i' variable on the top-level, so no need
to declare a second one that'd just shadow the original.
Change-Id: I5dfa4df2c4793be220a40ac642b19bf440e80220
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This information should be part of the main BR/EDR context struct,
rather than there being a separate member in struct bt_dev. If/when
the needed ESCO information grows we can consider having a separate
struct, but even then it should be part of the main BR/EDR struct
instead of sitting directly in bt_dev.
Change-Id: I3edf120606ea6c6974f515bba90de2b25fc6fac6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I8f57a17f78e674aca5400f005db8975c9f9e150e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Protocols/profiles may want to know when exactly their PDU has been
transmitted over the air. To make this possible, introduce support for
a callback that will get called when the controller reports that a
packet has been transmitted (through the Number of Completed Packets
HCI event).
Change-Id: Ia3a19b93c5b2111f144bfabe5861187c41525f30
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the connection process fails the user may still need to do
bt_conn_get_info() in its connected callback, so this needs to give a
meaningful value for the remote address. Start off with the one that
was given to bt_conn_create_le().
Jira: ZEP-2005
Change-Id: I4e9a033dec7c55fa549f5b6746c3bd81c0ccade5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_conn_set_state() function will not notify the connected
callback of the connection error if conn->err isn't properly set.
Jira: ZEP-2005
Change-Id: Idc30e736f4d8ba00156bf5c0e37dcccdb151742f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When there's no support for connections there's also no need to track
the controller side buffers.
Change-Id: I7eac3af486f139f1ab32efda8ccfa188ed8359eb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This avoid having duplicated code for list manipulation in both LE and
BR channels.
Change-Id: I734635e8e51d4b826a3d45cda8551e1e509bd913
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_conn_le_param_update returns -EBUSY when used in central
role if peer did not support LE connection parameter
request.
This commit allows a central role to use either LE
connection parameter request, if local controller supports
it, else use LE connection update.
Jira: ZEP-1773
Change-id: I72b9c77440459672fd50216a74ffcbd59c5f38f6
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Added checks for latency and timeout changes requested in
bt_conn_le_param_update, to decide if connection parameter
update is needed.
Change-id: I9de9f566158c5ade808ed356cb90b27186aa0243
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This patch adds support to initiate audio connection from the stack.
< HCI Command: Setup Synchronous... (0x01|0x0028) plen 17 [hci0]
Handle: 256
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 7
Setting: 0x0060
Input Coding: Linear
Input Data Format: 2's complement
Input Sample Size: 16-bit
# of bits padding at MSB: 0
Air Coding Format: CVSD
Retransmission effort: Optimize for power consumption (0x01)
Packet type: 0x003e
HV2 may be used
HV3 may be used
EV3 may be used
EV4 may be used
EV5 may be used
Change-Id: I4f4c0788760c9bdaf75651825511ff6bcd06df59
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This patch handles the SCO disconnection part also unref the connected
corresponding ACL conn.
Change-Id: Ic2de68560cfd7d847e6011578c4424e24800d2ac
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
This patch renames the 'conn' variable to 'acl' which is reference
to ACL connection for SCO connection.
Change-Id: I5f0a60bc5d80de08fa5b963cf545c71552909401
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
If the TX thread is not in k_poll() when conn->state gets set to
DISCONNECTED and a dummy buffer is pushed to conn->tx_queue the
bt_conn_prepare_events() function would have failed to add the
connection to the poll list for cleanup. To ensure the cleanup always
happens introduce a new flag that indicates that a cleanup must
happen. The extra benefit of the flag is that we no-longer need a
dummy buffer, but can simply use the conn_change signal to wake up the
TX thread.
Change-Id: I369584d305261ab3666b931c786daff9d131d228
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
From k_poll_signal_init() documentation:
The poll signal contains a 'signaled' field that, when set by
k_poll_signal(), stays set until the user sets it back to 0. It thus
has to be reset by the user before being passed again to k_poll() or
k_poll() will consider it being signaled, and will return immediately.
Change-Id: I55daac92dd6293ac653fd7fa0f907b0b7fd99d65
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
We can go further with taking advantage of k_poll and merge the
connection TX thread together with the HCI command thread, thereby
saving even more memory.
Change-Id: I1792056fd4621d62c7cd05929094033acca45c74
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that the k_poll API is available we can use it to have single
connection TX thread instead of multiple ones, which helps reduce the
per-connection memory overhead by a substantial amount.
Change-Id: Icb5d4da87cf0d660bba8da43186d1e76f41c825a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Detaching the timeout from the tx_thread lets us prepare for merging
all TX threads into a single one with the help of k_poll(). There's no
need to define a new delayed work object since the existing connection
parameter update object and connection timeout will never need to run
in parallel. Additionally, but some CONFIG_BLUETOOTH_CENTRAL guards to
void pulling in unnecessary code when Central role is not enabled.
Change-Id: Ia1f222aa052edcecd484a924f2d9a63a3b8fd11f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
